User's Manual

DiSEqC 1.2 Positioner Setting
If you want to use an antenna positioner compatible with DiSEqC 1.2,
please do the following :
- Motor/Goto 0
Determine the kind of Motor & whether or not controlling it by using
or .
If you press , DiSEqc Motor will move toward Zero Equator.
- Move / Save : Select West/East direction with or .
- Set Limit : Select limit of your antenna movement to east/west direction
and press .
Note : This may be necessary to protect your antenna from any possible
collision between your antenna and certain obstacles nearby it.
- My longitude /My latitude
You can use this item when STAB is set on 'Motor/Goto 0'.
Determine your longitude & latitude at present.
'East/West' is changed by using or .
Move your antenna to west direction.
Move your antenna to east direction.
Store the position of your antenna.
21
Tuner Lock
FEC 1/2, 2/3, 3/4, 5/6 or 7/8
Level over 30%
Quality over 10%
On Using DiSEqC Motor.
Off Not using DiSEqC Motor.
STAB
Using the specific Motor supplied by Stab company.
Determine the longitude of the satellite on LNB
Configuration Menu.
If the longitude of the satellite on LNB Configuration
Menu is set, user must input the longitude about your
position at present