User's Manual
22
After finishing ‘Antenna Setup’, execute a ‘Satellite Scan’.
Then you can get all channels in the pre-programmed TPs. This func-
tion can also be used to get the latest channel data while receiver is
in use. Through this function, the receiver searches for all the avail-
able channels and saves them in the memory.
Press MENU key.
Select ‘Installation’ with
or
, and press .
Select ‘Satellite Scan’ with
or
, and press .
Screen
Select ‘Scan Mode’ with
or
.
Select the scan mode you want with
or
.
Select the satellite you want with
or
.
Screen
5
Satellite Scan
LNB Configuration
Antenna Setup
Satellite Scan
TP Edit/Scan
Factory Set
Installation
-Next, -Prev.
Satellite Scan
-Select, -Prev.-Main,
Free+Scrambled
AsiaSat 2
Scan Mode
Satellite Name