User's Manual

You can select the satellite input signal display mode.

Press MENU key.

Press or to select ‘System Parameters’, and press .

Press or to select ‘Screen’.

Press or to select ‘P/S’ or ‘L. Box’.

Note : 1. If you select ‘L.Box’, the screen might be distorted. Upper and lower

part of the screen will be blocked with black stripes.

2. ‘Screen’ function is helpful when receiving 16 x 9 signal with TV of

4x3 format.

P/S

When you set screen display boundary from Pan/Scan

data of Satellite input signal. (For signal for 16x9 program)

L.Box

You can watch 16 x 9 ratio screen by reducing original

size vertically and horizontally.

Setting Screen

You can select the channel number for the RF modulator output.

Press MENU key.

Press or to select ‘System Parameters’, and press .

Press or to select ‘RF Channel’.

Press or to select channel number you want.

Note : RF modulator channel number has nothing to do with any channel

numbers of TV ANT IN signal.

Setting Output Channel no. of RF Modulator