User's Manual

54
Select ‘Polarization’ by pressing and the set the proper
value for selected TP with
or .
Select ‘Symbol rate’ by pressing and enter the symbol rate
value for the selected TP with numeric keys .
After entering all values of the TP parameters, move to ‘SCAN’
section (column) with and press for storing all the
entered TP data.
As a result, you can get the following menu showing the scan-
ning process.
Screen
After scanning process, the first channel of scanned TP will be
displayed.
Screen
Note : If the scan fails, please check whether your entered values are cor-
rect or not and the signal reception sensitivity is good or bad.
TP Edit/Scan
-Select, -Prev.-Main,
USER
[15] 3,820 GHz
Vertical-14V
28,123 MSPS
Free+Scrambled
Good
81%
Satellite Name
TP Frequency
Polarization
Symbol Rate
Scan
TP Delete
Scanning
Press to stop scanning
Q
TP Edit/Scan
Good
82%
-Watch, -Prev./-Page Up/Down,
TV: 6 Success Radio: 20
17
18
19
20
21
22
DW 9
RDP ANTENA 1
RDP ESPECIAL
NN
¥xÆW
a
N¥ << TWN
¥@uØ1/2Auø USA-
AsiaSat 2 [24] 4,000 GHz Hor. 28,123
~
~
9
10
11
12
13
14
15
16
RAI Internati
TVE
TV5-Asia
RTPi
uØoH-u1/4Ö¥x CS
ªFËê>>Ú¥x ET
«DoZ¥x USTV-I
oé¥>>¥x JET