User's Manual

To receive pay-TV channels you need a CA Module and a Smart card from the ser-

vice provider (program distributor) of your preference. If you are subscribing to ser-

vices from more than one service provider, you need to change different smart card

or even different CA Modules.

Since a smart card is connected to a single service provider, a limited range of

channels will be available. Without the CA Module and the smart card, you can

watch only ‘Free-to-Air’ programs.

PIN-Code

Note : 1. Insert the CAM fully into the slot so that the arrow marked on the CAM

faces upwards and inwards.

2. Insert the smart card fully into the CAM so that the micro chip (gold color)

faces upwards and inwards.

3. Insert the Smart card fully into IRDETO CAS slot and make sure that the

micro chip of card is faced downward.

The message of ‘CAM Initializing’ will appear on the screen.

After the message ‘CAM Initializing’ has disappeared, you can select the channel

you want.

The card is loaded with a 4-digit code, a so-called PIN code (Personal Identification

Number). Normally the PIN code is ‘0000’ or ‘1234’. The PIN code is necessary for

the future extra service offered by the service provider.

With a DVB COMMON INTERFACE compatible CAM (Conditional Access Module) and a

Smart card, you can receive relevant scrambled channels and/or encrypted channels.

Insert a CAM into one slot of your receiver.

(You can insert two CAMs at the same time)