User's Manual

67
Remedy
Connect power cord properly into
the power socket.
Connect two terminals correctly
with scart cable or RCA or RF cable.
Connect the antenna cable cor-
rectly.
Adjust the direction of antenna.
Check the cable connections,
LNB and other equipment connect-
ed between the LNB and the
receiver or adjust the antenna.
Type the setting value correctly.
Use TV of same mode.
Use the NTSC/PAL converter con-
nected to the receiver and TV.
Change the batteries.
Switch off the light.
Aim the remote control at the
receiver.
Possible causes
AC power cord disconnected.
Wrong connection of the
video/audio output to TV input
terminal.
Wrong connection of satellite
antenna cable.
Wrong direction of satellite
antenna.
No signal or weak signal.
Wrong setting of channel infor-
mation in MENU screen.
Your TV mode is different from
satellite broadcasting mode.
Battery exhausted.
Fluorescent light interfering
with the remote controller
Remote controller is incorrectly
aimed.
Problem
LED on front panel
does not light.
No Picture or sound.
Black-and-white
screen or V-Hold.
The remote con-
troller is not working.
There may be various reasons for the abnormal operation of the unit. Therefore, if the
unit does not work properly, check it according to the procedures shown in the table
below :