User's Manual

ManualsBrandsHyundai Digital Technology ManualsElectronicsDigital Satellite Receiver

109

4. Controls/Functions

4.1 Front Panel

[1] Antenna : Digital cable signal input to digital tuner

[2] Switch Bypass : To switch the receiver in “Car SW mode” or “power on

mode”.

[3] PWR IN : Input Voltage level (10-28VDC).

[4] SIM slot(Smart Card) : SIM Card slot..

[5] Ext IR : To receive the infrared signal from IR RCU (If want to be use the IR

RCU).

[6] USB HOST 2.0 : When use the Firmware download

[7] LED Light : Turn on red light while in the “Standby mode”

Green light while in the “power on mode”.

Flashes yellow when receiving data from RF RCU

[8] Video : Composite video output

[9] Audio L/R : Audio output Left & Right

1 8

2 3 4 5 6 7 9

Connecting your TV directly to the audio/video output of your Set-Top Box

will assure a more vivid picture and enhance your viewing enjoyment.

4.2 RF Remote Control Unit.

[1] POWER : To switch into

‘Standby’ or ‘Power on’ mode

[2] TV/R : To switch between the TV

and Radio channels

[3] - [4] Up & Down : To move the

cursor position on the

application.

[5] - [6] Left & Right : To change

the value of an item with

preprogrammed values.

[7] (OK) : To select an item or to

confirm a menu

[8] CHANNEL : To adjust the

channel

[9] MUTE : To turn the sound

on/off.

[10] VOLUME : To adjust the

volume level.

[11] Guide : To watch program

information

[12] BACK : Reserved.

[13] INFO. : To display the

information of the current

channel

[14] RED : To see Favorite channel list. To set up favorite in the Channel list

[15] BLUE : Reserved

[16] GREEN : To lock channel in the Channel list menu.

[17] Numeric Keys (0-9) : To select channels and input of channel numbers or

characters

[18] MENU : To enter the main menu.

[19] EXIT : To return to previous status or menu.