P910-ENG 01.2.
P910-ENG 01.2.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆC U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆD TCO°99 Congratulations ! You have just purchased a TCO°Æ 99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also, to the further development of environmentally adapted electronics products.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆE Current information regarding TCO°Æ 99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ TCO°Æ 99 is a co-operative project between TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) and NUTEK (The National Board for Industrial and Technical Development in Sweden).
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆF °· ENGLISH Please check your power cord before installation if it is UL listed one. °· FRANÇAIS Veuillez vérifier que votre cordon d'alimentation soit homologué UL avant l'installation. °· ITALIANO Prima di installare controllare che il cavo di alimentazione sia approvato UL. °· DEUTSCH Bitte prüfen Sie vor der Installation des Netzkabels, ob es in der UL-Liste aufgeführt ist. °· ESPAÑOL Compruebe el cable de potencia antes de la instalación si es uno de la lista UL.
P910-ENG 01.2.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆH Contents Intr oduction ........................................................................................ 1 Safety Information 1 ............................................................................. Installing the monitor ....................................................................... 2 Packing List ..........................................................................................................
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ1 Introduction This manual contains instructions for installing and operating A927. A927 is a highly ergonomic color display unit; • • • • • • 19” diagonal (18” viewable) 0.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ2 User's Guide Installing the monitor Packing List The following items should be found in the packaging. 19” colour monitor Tilt and Swivel User's Guide Signal Cable ! 2 Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ3 Fastening the swivel and tilt base • • Place the base against the bottom of the monitor so that the base fasteners are aligned with appropriate slots. Push the base towards the front of the monitor until the latch locks into position. Selecting a suitable location • • • • • Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ4 User's Guid e Connecting the monitor ! 4 Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ5 1. Insert the 15-pin signal cable connector to the VGA connection on your computer and screw it down. 2. Plug the display unit’s power cable first to the back of the display unit. 3. Then plug the power cable to a 100V - 240V earthed electrical outlet or to the system unit, if it has an outlet for the display power cable. 4. Turn on the display unit using the power switch and check that the power LED is on.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ6 User's Guide Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98. 1. Go to the configuration window (Start-Settings-Configuration window). 2. Double click on the ‘Display’ icon. 3. Click on the ‘Settings’ tab. 4. Click on the ‘Advanced’ button. 5. Click on ‘Adapter’ and select 85Hz from the list. 6. Click on ‘Apply’ to accept the selected value.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ7 Adjusting the picture You can adjust the screen display by using the buttons located below the screen. Using the On Screen Display 1. Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. 2. Push the °„ or °Â button to choose the item you want to adjust. The selected item is highlighted. 3. Push the SELECT button to adjust the highlighted item. 4.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ8 User's Guide BRIGHTNESS Use the button to select the brightness adjustment. Adjust with or button. CONTRAST Use the button to select the contrast adjustment. Adjust with or button. OSD Adjustments The OSD adjustments available to you are listed below. H. SIZE Adjusts the horizontal size of the entire screen image. H. POSITION Adjusts the horizontal position of the entire screen image. V. SIZE Adjusts the vertical size of the entire screen image. V.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ9 H. MOIRE Clears horizontal moire if a series of concentric circles or arcs appear on your screen. Moire is an interference pattern that makes the screen seem to have faint lines. A picture that is rasterised or consists of (small) repeating figures is sensitive to moire interference. Strong colors are also liable to intensify moire. The moire pattern on the screen does not affect the printout of the image.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ10 User's Guide COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: 9300K, 6500K or USER. With the USER setting you can set individual values for red, green and blue.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ11 Display power management If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Reducing power consumption Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ12 User's Guide Tr oubleshooting If your monitor is not functioning properly, you may be able to solve the problem by reading followings. Problem Blank screen Possible solution If the power LED is not lit, push the Power switch to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
P910-ENG 01.2.16 10:53 AM Problem ∆‰¿Ã¡ˆ13 Possible solution Size, position, shape or quality unsatisfactory Make sure that other electrical devices are at least quality 30cm away. Adjust the picture characteristics as described in the section Adjusting the picture. Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
P910-ENG 01.2.16 10:53 AM ∆‰¿Ã¡ˆ14 User's Guide Specifications Picture tube Display area Number of color Input signals Frequency rate 19"(viewable size : 18") Dot pitch 0.26 mm Anti-Static, anti-glare, TCO treatment coated. factory preset area : 352X264 mm Infinite R.G.B Analog, 15 pin D-sub Horizontal : 30 to 95kHz, Vertical : 50 to 150Hz Maximum bandwidth 202.5 MHz Maximum resolution 1600X1200@75Hz Input voltage 100-240 VAC, 2.