NEXT ImageQuest Q770 Perfectly Flat Color Monitor User's Guide Click www.hyundaiQ.
BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BACK DECLARATION OF CONFORMITY WE ImageQuest CO., LTD.
Q770 Perfectly Flat Monitor BACK NEXT Contents 1. Introduction ..............................1/18 2. Safety Information ...................1/18 3. Installing the monitor ..............3/18 3-1. Packing List ...................................3/18 3-2. Fastening the swivel and tilt base ..4/18 3-3. Selecting a suitable location ........4/18 3-4. Connecting the monitor ...............5/18 3-5. Setting the refresh rate ................7/18 Preset Timing Table ......................7/18 4.
BACK Q770 Perfectly Flat Monitor NEXT 1. Introduction This manual contains instructions for installing and operating ImageQuest Q770. ImageQuest Q770 is a highly ergonomic color display unit; • • • • • • 17” diagonal Flat(16” viewable) 0.25mm dot pitch CDT Supporting high screen refresh rates and full scan flicker-free picture quality With On Screen Display menus for user control 100-240V AC input voltage VESA DPMS (Display Power Management Signaling) VESA DDC1/2B compatibility 2.
Q770 Perfectly Flat Monitor BACK NEXT Cleaning and Maintenance • • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong solvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
BACK Q770 Perfectly Flat Monitor 3. Installing the monitor NEXT The following items should be found in the packaging. 3-1. Packing List UK Japan America/Canada Europe South Africa Australia Attached Signal Cable Korea Tilt and Swivel ! Compact Disc Power cord Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
Q770 Perfectly Flat Monitor BACK NEXT 3-2. Fastening the swivel and tilt base • • 3-3. Selecting a suitable location • • • • • Place the base against the bottom of the monitor so that the base fasteners are aligned with appropriate slots. Push the base towards the front of the monitor until the latch locks into position. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation.
Q770 Perfectly Flat Monitor 3-4. Connecting the monitor ! BACK NEXT Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets.
Q770 Perfectly Flat Monitor 1. 2. 3. 4. NEXT Insert the 15-pin signal cable connector to the VGA connection on your computer and screw it down. Plug the display unit’s power cable first to the back of the display unit. Then plug the power cable to a 100V - 240V earthed electrical outlet or to the system unit, if it has an outlet for the display power cable. Turn on the display unit using the Soft power switch and check that the power LED is on.
Q770 Perfectly Flat Monitor 3-5. Setting the refresh rate NEXT Follow the instructions below to set your refresh rate in Windows 98. 1. 2. 3. 4. 5. 6. Preset Timing Table BACK Go to the configuration window (Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 85Hz from the list. Click on ‘Apply’ to accept the selected value.
BACK Q770 Perfectly Flat Monitor 4. Adjusting the picture NEXT You can adjust the screen display by using the buttons located below the screen.
Q770 Perfectly Flat Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. BACK NEXT Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the SELECT button to return to the previous menu if you are in a submenu.
BACK Q770 Perfectly Flat Monitor NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. You can play the movie file to see how to adjust the picture image by clicking each icon or title hereunder. H. SIZE Adjusts the horizontal size of the entire screen image. H. POSITION Adjusts the horizontal position of the entire screen image. V. SIZE Adjusts the vertical size of the entire screen image. V. POSITION Adjusts the vertical position of the entire screen image.
BACK Q770 Perfectly Flat Monitor NEXT PIN BALANCE If the sides of the picture are bowed to the right or to the left, you can correct the pincushion balance by using this adjustment. V. MOIRE Clears vertical moire if a series of concentric circles or arcs appear on your screen. H. MOIRE Clears horizontal moire if a series of concentric circles or arcs appear on your screen. Moire is an interference pattern that makes the screen seem to have faint lines.
Q770 Perfectly Flat Monitor BACK NEXT OSD H. POSITION Adjusts the OSD menu’s horizontal position on the screen. OSD V. POSITION Adjusts the OSD menu’s vertical position on the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: 9300K, 6500K or USER. With the USER setting you can set individual values for red, green and blue.
Q770 Perfectly Flat Monitor BACK NEXT DEGAUSS External magnetic fields may cause distortion or discoloration in the picture. Demagnetizing takes place automatically when the display unit is switched on, and the unit normally maintains faultless color purity during operation. If you have tilted, swiveled or moved the display unit, you can perform demagnetization. During this process the picture is distorted for a few seconds.
BACK Q770 Perfectly Flat Monitor 5. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
BACK Q770 Perfectly Flat Monitor NEXT 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by reading followings. Problem Blank screen Possible solution If the power LED is not lit, push the power switch to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer.
BACK Q770 Perfectly Flat Monitor NEXT Problem Possible solution The display does not enter power management mode The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. Screen flickers The screen may seem to flicker when the refresh rate is less than 75Hz. See the list of recommended modes in the section Preset timing table.
BACK Q770 Perfectly Flat Monitor NEXT Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance.
Q770 Perfectly Flat Monitor 7. Specifications Picture tube Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Input voltage Power consumption Power Management Plug & Play OSD menu Ergonomics, Safety and EMC BACK 17"(viewable size : 16") Dot pitch 0.25 mm Anti-Static, anti-glare, TCO treatment coated. factory preset area : 305X229 mm Infinite R.G.B Analog, 15 pin D-sub Horizontal : 30 to 70kHz, Vertical : 50 to 150Hz 108 MHz 1024X768@85Hz 100 - 240 VAC, 1.
