FCC ID : PJIL17A00001 ATTACHMENT E. - USER’S MANUAL - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
NEXT Type No. L17A00000 / L19A00000 Model.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DECLARATION OF CONFORMITY WE Hyundai ImageQuest CO., LTD.
L17T/L19T TFT LCD Color Multi Function Monitor Contents 1. Introduction ...................................1/35 2. Safety Information ........................1/35 3. Installing the monitor ...................4/35 3-1. Packing List .........................................4/35 3-2. Selecting a suitable location ..............5/35 3-3. Connecting the monitor .....................5/35 3-4. Connecting the TV ..............................5/35 3-5. Setting the refresh rate ......................
L17T/L19T TFT LCD Color Multi Function Monitor 1. Introduction This manual contains instructions for installing and operating Hyundai ImageQuest L17T/L19T. Hyundai ImageQuest L17T/L19T is a highly ergonomic color display unit. 2. Safety Information • • • • • • • • • 17"/19” viewable SXGA LCD High quality screen re-scaling capability 100-240V AC input voltage, DC 12V 3.
L17T/L19T TFT LCD Color Multi Function Monitor Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire.
L17T/L19T TFT LCD Color Multi Function Monitor Cleaning and Maintenance • • • • • To avoid risk from electric shock, do not disassemble the cabinet of the unit. The unit is not user-serviceable. Remember to unplug the unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with sponge/cloth that could scratch the surface.
L17T/L19T TFT LCD Color Multi Function Monitor 3. Installing the monitor The following items should be found in the package. 3-1.
L17T/L19T TFT LCD Color Multi Function Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor ! 1. 2. 3. 4. 5. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
L17T/L19T TFT LCD Color Multi Function Monitor 3-4. Connecting the monitor - Connecting External A/V Devices • Connect RCA (Yellow) or S-Video cables to an appropriate external A/V device such as VCR, DVD or Camcorder. • Connect RCA audio cables to “Audio (R)” and “Audio (L)” terminals and the other ends to corresponding audio out terminals on the A/V device. - Connecting TV/CATV • Connect an antenna or CATV cable to the antenna terminal on the back of the monitor.
L17T/L19T TFT LCD Color Multi Function Monitor • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2Wrms (typ.) output power. This system also supports a headphone output jack. ! This system has been tuned to get a best tone quality which an audio input level is under 300mVrms. if the input level is more than 600mVp-p, you must tune down the audio input as the audio output tone may be distorted.
L17T/L19T TFT LCD Color Multi Function Monitor LED Indicator Power Switch 3-5. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
L17T/L19T TFT LCD Color Multi Function Monitor Preset Timing Table ! If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No.
L17T/L19T TFT LCD Color Multi Function Monitor 3-6. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between 0~20 degree. 20o Kensington security slot Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information.
L17T/L19T TFT LCD Color Multi Function Monitor VESA MOUNT’G • • ! This unit supports VESA FPMPMI standard for 75mmx75mm screw mounting by giving 4 screw holes inside the base stand of the unit. For buying VESA Flat Panel Monitor Mounting Devices, please contact the following . Only M4 x10 size screw must be used for proper mounting. (Using wrong size screw may cause damages to the device) * Ergotron, Inc.
L17T/L19T TFT LCD Color Multi Function Monitor 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. 1280X1024 V:60.0/H:63.
L17T/L19T TFT LCD Color Multi Function Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
L17T/L19T TFT LCD Color Multi Function Monitor 4-3. OSD Adjustments The OSD adjustments available to you are listed below. BRIGHTNESS Adjusts the brightness of the screen. CONTRAST Adjusts the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: BLUISH, REDDISH or USER.
L17T/L19T TFT LCD Color Multi Function Monitor OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. AUTO COLOR Optimum color setting is auto programmed for user’s convenience. AUDIO VOLUME Adjust the audio volume level. SOUND OFF This menu is used to choose audio on / off. TREBLE Emphasize high frequency audio. BASE Emphasize low frequency audio. AUTO ADJUST You can adjust the shape of the screen automatically at the full screen pattern.
L17T/L19T TFT LCD Color Multi Function Monitor H/V. POSITION H POSITION Adjust the horizontal position of the entire screen image. V POSITION Adjust the vertical position of the entire screen image. CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. SOURCE No function. (Only supportable by the optional appliance.
L17T/L19T TFT LCD Color Multi Function Monitor 5. Adjusting the picture (TV) 5-1. Direct access buttons LED INDICATOR /Receive window for Remote controller POWER SWITCH Use this button to change the video source Video sources are changed in the following order : PC → S-VIDEO → VIDEO → TV Use this button to select the volume adjustment. Then, adjust with the Up or Down button. Open the On-Screen-Display and select the highlighted function.
L17T/L19T TFT LCD Color Multi Function Monitor Select a function on the OSD. Moves the selector right or left on the OSD. Increases or decreases the values of the selected function. Increases or decreases the channel number. 5-2. OSD Adjustments The OSD adjustments are listed below. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. IMAGE ADJUST SATURATION Adjust the color saturation of the video image. TINT Adjust the color Tint of the video image.
L17T/L19T TFT LCD Color Multi Function Monitor MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the time. The OSD Menu window will be displayed on the screen by using this adjustment. OSD POSITION Adjusts the OSD menu's horizontal or vertical position on the screen. L19T TTX LANGUAGE(OPTION) AUDIO VOLUME Adjusts the audio volume level. SOUND OFF This menu is used to turn the choose audio on /off. TREBLE Emphasizes high frequency audio. BASE Emphasizes low frequency audio.
L17T/L19T TFT LCD Color Multi Function Monitor SOURCE This menu is used to choose the desired input signal source. There are four signal sources available : - Analog RGB : 15 pin D-sub, Analog signal - S-video : MINI DIN, Separate video signal - Composite Video : RCA Jack, Composite video signal - TV : Antenna or CATV signal TV CH SEARCHING This Function is to scan the broadcasting channels in your location. PR(CH) EDIT You can change the channel or PR No with this function.
L17T/L19T TFT LCD Color Multi Function Monitor 6. TV Functions POWER MUTE 1 2 3 4 5 6 7 8 9 PRE,P – CH P-CH EDIT 0 PC S-VIDEO SOURCE INFO VIDEO TV AIR/CABLE SEARCH MENU VOL EXIT P-CHANNEL AUTO BRIGHTNESS CONTRAST TTX/MIX LIST/FLOF STORE HOLD SIZE REVEAL SUB PAGE INDEX 1. POWER ON/OFF 2. PROGRAM EDIT 3. S-VIDEO MODE 4. PC MODE 5. SELECT INPUT SIGNALS; PC, S-VIDEO, VIDEO, TV 6. DISPLAY CURRENT STATUS 7. MOVE LEFT/RIGHT VOLUME UP/DOWN 8. DISPLAY OSD MENU ON SCREEN 9.
BACK L17T/L19T TFT LCD Color Multi Function MonitorNEXT • Channel Search - PAL In order to watch TV, Multimedia Kit shall be installed to your monitor. Following instructions are based on using remote controller, and MENU(↵) button in remote controller is compatible with SELECT button of the monitor. You can scan for the frequency ranges available in your country. GER EST DEN SWE FIN ESP+FRA FRA ITA GBR AUS NZL RUS IRL CHN USA KOR JPN 1. Press the MENU(↵) button and select TV icon. 2.
L17T/L19T TFT LCD Color Multi Function Monitor • MANUAL PR This function is to store the channels manually. a. Select MANUAL PR. b. Select TV CH by +/- buttons, then press MENU(↵) button. at channel number. You can see c. Change the channel by +/- buttons or numeric buttons, and press EXIT. d. If you choose CH FINE TUNE and press MENU(↵), you can at the number. see e. You can tune the TV screen by +/- buttons, then press EXIT. f.
L17T/L19T TFT LCD Color Multi Function Monitor 1. Press the MENU(↵) button and select TV icon. 2. Select PR EDIT and press MENU(↵) button, then you can see the current PR list. *If you want to move to other pages, move the cursor PAGE +/- and press MENU(↵) button. Then you can move to the other page by pressing +/button 3. Move the cursor to the PR number you want to change, then press MENU(↵) to go to the sub menu. at the channel 4. Select TV CH, then press MENU(↵) button. You can see numbers. 5.
L17T/L19T TFT LCD Color Multi Function Monitor • L19T Only TELETEXT (Optional) You can display teletext information from TV channels. – Displaying teletext information • Other Functions 1. Press TTX/MIX button to display teletext mode. 2. To see the actual broadcast simultaneously with the teletext page, press TTX/MIX button again. 3. Press TTX/MIX button again to exit from the teletext mode. *If you press MENU(↵) when you watch teletext information, you can go back to the top page. 1.
L17T/L19T TFT LCD Color Multi Function Monitor 4. FLOF mode : In FLOF mode, press the colored button corresponding to the topic that you wish to select. (The available topics are listed on the status information line) the page displayed with additional color-coded information that can be selected in the same way. a) RED button : If you want to go to the previous page, press RED button. b) Green button : If you wan to go to the next page, press GREEN button. 5.
L17T/L19T TFT LCD Color Multi Function Monitor • Channel Search - NTSC TV INPUT First of all, you can select the Air or Cable before setup the Channel Searching. 1. Press the MENU(↵) button and select TV icon. 2. Move cursor to TV INPUT using the +/- buttons. 3. Press the MENU(↵) to Select TV INPUT, then select AIR or CABLE by using the +/buttons. 4. Press the EXIT button to go back to the previous menu. You can scan for the frequency ranges available in your country.
L17T/L19T TFT LCD Color Multi Function Monitor • Channel Edit • Channel Fine Tune 1. Press the MENU(↵) button and select TV icon. 2. Select CH SEARCHING and you can see country list. 3. Choose your country by +/- key, then press MENU(↵) button to go to CH SEARCHING. If your country is not listed, contact the distributors or service representatives. . Select CH EDIT by +/- buttons, then press MENU(↵) button. You can save or delete above changes by selecting DEL or ADD button by pressing MENU(↵) button.
L17T/L19T TFT LCD Color Multi Function Monitor 7. Display power management Reducing power consumption If the power management function of your computer is enabled, your monitor turns on/off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
L17T/L19T TFT LCD Color Multi Function Monitor 8. Troubleshooting (TV) If this product is not functioning properly, you may be able to solve the problem by by the following below ; Problem Possible solution Color defects If the screen color is not suitable for viewing. You can select “Recall” button in the OSD menu. This function returns to the initial factor setting values. (Page 4) No channel searching If it could not find channels please check it again according to the following steps.
L17T/L19T TFT LCD Color Multi Function Monitor 6. Troubleshooting (Monitor) If this product is not functioning properly, you may be able to solve the problem by by the following below ; Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the unit is powered through the computer, check that the computer is switched on. The unit might be in standby mode. Push one of the keyboard keys.
L17T/L19T TFT LCD Color Multi Function Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
L17T/L19T TFT LCD Color Multi Function Monitor Problem The power LED is a orange color Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
L17T/L19T TFT LCD Color Multi Function Monitor 9. Specifications • L17T LCD Pixel pitch Display area Number of color Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Built in Speaker VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 17"viewable, Diagonal, A-Si TFT 0.264 x 0.264mm 337.920 x 270.336 mm 16.2Mil Horizontal : 31.0 to 80.
L17T/L19T TFT LCD Color Multi Function Monitor • L19T LCD Pixel pitch Display area Number of color Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Built in Speaker VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 19"viewable, Diagonal, A-Si TFT 0.294 x 0.294mm 376.32 x 301.056 mm 16.7Mil Horizontal : 31.0 to 80.