NEXT Type No. L22C0E080 Model.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1. Introduction This manual contains instructions for installing and operating HYUNDAI IT CORP. HYUNDAI IT CORP. This is a highly ergonomic color display unit. • 24” viewable WUXGA LCD • High quality screen re-scaling capability • 100-240V AC input voltage • VESA DPMS (Display Power Management Signaling) • VESA DDC1/2B compatibility • Advanced digital On-Screen-Display controls • Digital Signal Input by DVI-1.
Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~40°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.
Cleaning and Maintenance • • • • • To avoid to risk of electric shock, do not disassemble the Cabinet of display Unit. The Cabinet is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
3. Installing the monitor The following items should be found in the packaging. 3-1. Packing List Power Cord UK Japan America/Canada Europe South Africa Australia Signal Cable DVI Cable Compact Disc Audio Cable Korea ! Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition.
3-2. Selecting a suitable location • • • • • 3-3. Connecting the PC ! • 15 pin D-sub / DVI-D / HDMI 1. 2. 3. 4. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
• Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 3W(max.) output power. This system also supports a headphone output jack. ! This system has been tuned to get a best tone quality which an audio input level is under 500mv rms. If the input level is more than 500mv rms, you must tune down the audio input as the audio output tone may be distorted.
3-4. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. ! No. Resolution H-Freq.(Khz) V-Freq.(hz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 640 X 350 720 X 400 640 X 480 640 X 480 800 X 600 800 X 600 800 X 600 832 X 624 1024 X 768 1024 X 768 1024 X 768 1152 X 864 1152 X 870 1280 X 960 1280 X 1024 1280 X 1024 1680 X 1050 1600 X 1200 1920 X 1200 31.4 31.4 31.
W240D Multi Function Wide Monitor 3-6. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between -3~17 degree.
W240D Multi Function Wide Monitor Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information. * Kensington Technology Group · Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 · Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.
4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. The second Menu from the OSD can't be chosen in digital-mode.
4-1. Using the On Screen Display To make adjustments in the On Screen Display, follow these steps: 1. 2. 3. 4. 5. 6. 4-2. Direct access buttons Push the MENU button to call the OSD to the screen. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
4-3. OSD Adjustments PC • Picture BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. H.POSITION To move image left and right. V.POSITION To move image up and down CLOCK To adjust the horizontal size of the entire screen image. HDMI MODE BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. SATURATION To adjust color density. SHARPNESS To adjust sharpness of screen.
• Color PC ANALOG STANDARD For general Color tone. REDISH For Redish color with warm tone. BLUISH For Bluish color with cool tone. USER For adjusting degree of RGB as User wants AUTO COLOR TO adjust the horizontal size of the entire screen image. HDMI MODE STANDARD For general Color tone. DYNAMIC To be Sharper image. MILD To be Smoother image.
• Sound VOLUME To adjust the audio volume level. BASE To emphasize low frequency audio. TREBLE To empahsize high frequency audio. BALANCE To use this function to balance sound from the left and right speakers. MUTE Audio ON or OFF • Setting OSD CONFIGURATION - OSD TIMER To adjust OSD Display time on the screen. - OSD POS To adjust OSD Display position on the screen. - TRANSPARENT To adjust the transparency of OSD window. - OSD ZOOM To adjust the size of OSD window.
DISPLAY CONTROL If you choose DISP. CONTROL on the OSD menu, you can adjust the following - Full (16:10) : Shows full screen regardless of screen size. - 4:3 : Displays image at 4:3 ratio. - Full (16:10) : Shows full screen regardless of screen size. - 16 : 9 : Displays image at 16:9 ratio. - 4:3 : Displays image at 4:3 ratio. - 1:1 : Displays image according to actual input pixels. - Zoom1 : Enlarges image by 20% - Zoom2 : Enlarges image by 25%.
5. Display power management If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer.
Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
Problem The power LED is a orange color Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible.
7. Specifications LCD Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Audio system VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 22" viewable, Diagonal, Pixel pitch 0.270mm, A-si TFT 473.78(H) X 298.1(V), 22" Diagonal 16.7 million colors ( true 8-bit color ) R.G.B Analog, 15pin D-sub / DVI-D / HDMI Horizontal : 30.
