27” QHD Wide LED Monitor User Manual L27DPJLP0
Precautions Precautions Warning The following information will help you avoid the risk of electric shock, serious injury or death. Power cord AC outlet Plug the power cord into a properly grounded outlet. There is the risk of electric shock. Do not allow any object or liquid to enter inside the monitor. There is the risk of electric shock, fire or damage to the monitor. Do not attempt to disassemble, fix or modify the monitor. There is the risk of electric shock or fire.
LCD Monitor Stand After assemble pedestal at stand body, assemble screw to driver. Adapter Jack Power Cord 15-pin D-Sub Cable Display Port DP Cable HDMI HDMI Cable Install CD / Quick Guide Dual link DVI Cable Adapter 24-pin Dual Link DVI Cable Display port Cable HDMI Cable(More than 1.
MENU Opens OSD Menu window. Cansels chosen OSD Menu setp by step, Closes OSD Menu. Decreases value of chosen icon. Volume Increases value of chosen icon. Mute Moves down icon choice bar. Automatic setting Moves up icon choice bar. Scale Chooses icons. Source 1. Press the “MENU” button to bring up the screen. 2. Press the " , " buttons to select the main option. " button after selecting the main option. 3. Press the " 4. Bring up the sub-menu. Use the " , " buttons to select the desired option. 5.
8 800 x 600 37.8 kHz 60 Hz 1024 x 768 48.3 kHz 60 Hz 1280 x 1024 63.9 kHz 60 Hz 1920 x 1080 66.6 kHz 60 Hz 1920 x 1200 74.0 kHz 60 Hz 2560 x 1440 88.8 kHz 60 Hz 480p 50/60 576p 50/60 720p 50/60 1080p 50/60 DVI(HDCP) ON Under 70 W (Max.) / Under 58 W (Typ.) Blue OFF Less than 0.
27 QHD Wide 596.74mm(H) x 335.66mm(V) 0.2331mm(H) x 0.2331mm(V) 2560 x 1440@60Hz 178º / 178º (H/V) 1.07 Billion 350 6 ms 31 ~ 90KHz 56 ~ 75Hz Analong RGB, DVI , HDMI , Disply port 15Pin D-Sub, 29pin DVI, 19Pin HDMI, 20Pin Display port, Audio In 70W (Max), 58W (Typ) 0.5W AC : 110V~240V 50/60Hz 1.
FCC compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
