NEXT ImageQuest L530 TF T L CD Color Monitor User's Guide Click www.hyundaiQ.
BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BACK DECLARATION OF CONFORMITY WE ImageQuest CO., LTD.
BACK L530 15" TFT Digital LCD Monitor NEXT Contents 1. Introduction ...............................1/15 2. Safety Information ...................1/15 3. Installing the monitor ..............4/15 3-1. Packing List ....................................4/15 3-2. Selecting a suitable location .........5/15 3-3. Connecting the monitor ................5/15 3-4. Setting the refresh rate ................7/15 Preset Timing Table .......................8/15 4. Adjusting the picture ................9/15 4-1.
BACK L530 15" TFT Digital LCD Monitor NEXT 1. Introduction This manual contains instructions for installing and operating ImageQuest L530. ImageQuest L530 is a highly ergonomic color display unit. • 15" viewable XGA LCD • Supporting full scan flicker-free picture quality • With On Screen Display menus for user control • 100-240V AC input voltage • DMPM (Digital Monitor Power Management) • VESA DDC 2B compatibility 2.
BACK L530 15" TFT Digital LCD Monitor NEXT Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.
L530 15" TFT Digital LCD Monitor BACK NEXT Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
BACK L530 15" TFT Digital LCD Monitor 3. Installing the monitor NEXT The following items should be found in the packaging. 3-1. Packing List UK Japan American/Canada Europe South Africa Australia Power Cord DVI-D Cable Compact Disc AC/DC Power adapter ! Korea Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
L530 15" TFT Digital LCD Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor ! 1. 2. 3. 4. 5. BACK NEXT Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
BACK L530 15" TFT Digital LCD Monitor 6. NEXT Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information.
BACK L530 15" TFT Digital LCD Monitor LED Indicator 3-4. Setting the refresh rate NEXT Soft Power Switch Follow the instructions below to set your refresh rate in Windows 98. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
BACK L530 15" TFT Digital LCD Monitor NEXT Preset Timing Table ! If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz. No.
BACK L530 15" TFT Digital LCD Monitor NEXT 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. 1024X768 V:60.4/H:48.
BACK L530 15" TFT Digital LCD Monitor 4-1. Using the On Screen Display 1. Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. ! 2. 3. 4. 5. 6. NEXT The resolution is displayed only when the monitor works in the preset mode. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection.
L530 15" TFT Digital LCD Monitor BACK NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. You can play the movie file to see how to adjust the picture image by clicking each icon or title hereunder. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. HUE Adjust the Hue of the screen image. FLESH TONE Adjust the Flesh tone of the screen image. MISC LANGUAGE You can select the language in which adjustment menus are displayed.
BACK L530 15" TFT Digital LCD Monitor 5. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
BACK L530 15" TFT Digital LCD Monitor NEXT 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by reading followings. Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
BACK L530 15" TFT Digital LCD Monitor Problem NEXT Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. Image is not stable Check that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor.
BACK L530 15" TFT Digital LCD Monitor 7. Specifications LCD Brightness Response Time Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Input voltage Power consumption Power management Plug & Play OSD menu Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 15"viewable, Diagonal Dot pitch 0.297 mm, AM-TFT 180cd/m2(Min.), 200cd/m2(Typ.) 40msec 304 X 228 mm 16,7 million colors (with dithering) T.M.D.
