General Information Parts Names and Functions - 42”/50” PDP TV Front View ENGLISH * This product image may be a bit different from the actual product. Power button Use this button to turn on or off the TV. Menu button Use this button to display or exit from the menu mode. Volume buttons Use these buttons to adjust sound levels. These buttons also serve as the cursors of Select/Adjust in Menu mode. Source button Use this button to switch among inputs connected to the TV.
General Information ENGLISH Rear View * This product image may be a bit different from the actual product.
General Information Remote Control 18 ENGLISH 1. POWER/STANDBY 2. MUTE This button is also used when setting up to use other external devices. 3. PIP FUNCTIONS - PIP : Use this button for PIP On/Off. - SOURCE : Use this button to select the input source of sub-picture. - SIZE : Use this button to select the size of sub-picture. - SWAP : Use this button to swap main and sub-picture. - POSITION : Use this button to select the position of sub-picture. 4. PREVIOUS PROGRAM 5.
General Information Teletext & Fastext Function ENGLISH (See pages 34 for more details.) 1. TTX/MIX To see Teletext Service Data for Analog TV and Digital TV. 2. GUIDE (EPG-Electronic Program Guide) To watch the program information. Press once more to return to normal mode. 3. CH. LIST To watch the channel list for Digital TV. Press key to confirm or press EXIT to return to previous channels. 4. RED rubber - DTV : To setup favorite channel lists in the Channel List menu.
Connections Connecting Indoor/Outdoor TV Antenna(UHF/VHF) - Antenna or Cable service without cable box connections - For on optimum picture quality, adjust the direction of antenna if needed. ENGLISH 26”/32”/40” TV VHF Antenna UHF Antenna 42”/50” TV Antenna cable ✓ When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend. ✓ If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
Connections Before Connecting the Video/Audio Connections to External Devices... ENGLISH Please make sure to read the following instruction to enjoy the best picture quality. Best picture quality is displayed in the following order. HDMI HDMI, DVI-1, D-Sub COMPONENT FULL SCART S-VIDEO COMPOSITE HALF SCAT The superior picture quality starts from the far left side. How to Connect a DTV Receiver or DVD Player 1.
Connections How to Connect a VCR, Cable Receiver, Camcoder, Game Player 42”/50” TV Camcorder Game Player ENGLISH 1. Connect the Video cable or S-Video cable between Video/S-Video output terminals of VCR or Cable receiver and Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.) 2. Connect the Audio cable (Left: white, Right: red) between Audio output terminals of VCR or cable receiver and Audio input terminal of TV. (Connect the jacks to terminals in the same color.
Connections Resolutions Supported in PC ENGLISH Model Resolution 640 x 350 26” / 32” / 40” LCD TV Vertical frequency Horizontal frequency 70.00 31.47 72.80 37.86 75.00 31.50 70.08 31.47 60.32 37.88 75.00 46.88 72.19 48.08 640 x 480 720 x 400 800 x 600 49.73 48.36 56.48 60.02 63.98 61.27 832 x 624 1024 x 768 1280 x 1024 1366 x 768 74.55 60.00 70.07 75.03 60.02 74.99 42” / 50 PDP TV Vertical frequency Horizontal frequency 70.09 31.47 85.08 37.86 59.94 31.47 72.80 37.86 75.00 37.50 85.01 43.27 70.
Connections HDMI Connection (For HDMI model only) ENGLISH HDMI*1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information. To the HDMI™ input terminal, you can connect an EIA/CEA-861/861*2 compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI output terminal.
Connections ENGLISH How to Set the OSD Screen PC : For supporting Personal Computer connection. DVI* : Digital Visual Interface for using TMDS transmission reduces the loss of signal. ➥ *Notes : “DVI” is changed to “HDMI” in HDMI model. HDMI* : High Definition Multi media Interface that supports both video and audio information. COMP-1 / COMP-2 : For supporting greater color accuracy than composite video or S-VIDEO by splitting chrominance into one video signal.
Picture Setup How to Select the Picture Mode Users can automatically adjust the picture mode according to the input mode. ENGLISH 1 Press MENU button. Menu items appear on the screen. 2 Press button to select “Picture” Icon. “PICTURE MODE” is highlighted. 3 Press / buttons, then the menu changes in the following order. ➛ STANDARD ➛ DYNAMIC ➛ MOVIE ➛ MILD ➛ USER ➛ 4 Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Picture Setup How to Set the Desired Picture in PC, DVI/HDMI Input Modes ENGLISH Users can adjust Color as users want. 1 Press MENU button. Menu items appear on the screen. 2 Press button to select “Picture” Icon. “CONTRAST” is highlighted. 3 Select required option by pressing the buttons to adjust. / buttons, then Press / After selecting COLOR TEMP, then the menu changes in the following order.
Picture Setup How to Set the Display Scale Users can adjust the display scale as they want ENGLISH 1 Press MENU button. Menu items appear on the screen. 2 3 4 Press button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / buttons, then the mode change in the following order. ➛ WIDE ➛ ZOOM1 ➛ ZOOM2 ➛ 4:3 ➛ 14:9 ➛ 5 Press EXIT button to TV viewing or press MENU button to return to the previous menu. Press / buttons to move to “SCALE”.
Picture Setup How to Set Film Mode ENGLISH Set Film Mode to receive a crisp, clear picture without flickering. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 Press button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / buttons to move to “FILM MODE”. Press / buttons to set ON/OFF . Press EXIT button to TV viewing or press MENU button to return to the previous menu. ✓ During the reproduction of a DVD or VCR it can come to a distortion of the picture edges.
Sound Setup How to Select the Audio Mode Users can adjust sound mode automatically as they want. ENGLISH 1 Press MENU button. Menu items appear on the screen. 2 3 4 Press Press / buttons, then the menu changes in the following order. ➛ STANDARD ➛ MUSIC ➛ MOVIE ➛ NEWS ➛ USER ➛ 5 Press EXIT button to TV viewing or press MENU button to return to the previous menu. / buttons to move to “SOUND” icon. Press button to select “SOUND” Icon. “SOUND MODE” is highlighted.
Sound Setup How to Select AVL ENGLISH This function will automatically give a similar volume size to each channel. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 6 Press / buttons to move to “SOUND” icon. Press button to select “SOUND” icon. “SOUND MODE” is highlighted. Press / buttons to move to “AVL”. Press / buttons to set to ON/OFF . Press EXIT button to TV viewing or press MENU button to return to the previous menu How to Select S.
Sound Setup How to Select TruSurround XT This function processes multi-channel surround sound through two speakers. Press MENU button. Menu items appear on the screen. 2 3 4 5 Press button to select “SOUND” Icon. “SOUND MODE” is highlighted. ENGLISH 1 Press / buttons to move to “TRUSURROUND XT”. Press / buttons to set to ON/OFF . Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Sound Setup How to Select Earphone ENGLISH User can adjust earphone volume. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 6 Press / buttons to move to “SOUND” icon. Press button to select “SOUND” icon. “SOUND MODE” is highlighted. Press / buttons to move to “EARPHONE”. Press / buttons to adjust volume. Press EXIT button to TV viewing or press MENU button to return to the previous menu ✓ Check the audio cable when the sound outputs in just one speaker only.
Channel Setup Automatic Program Searching Automatic program searching enables to search/store channels of countries where the user is located automatically. Press MENU button. Menu items appear on the screen. 2 3 Press 4 5 6 7 8 / ENGLISH 1 Buttons to move to “CHANNEL” icon. Press button to select “CHANNEL” Icon. “AUTO PROGRAM” is highlighted. Press buttons to select AUTO PROGRAM . Auto program menu appears, then “COUNTRY” is highlighted. Press / buttons to select your country.
Channel Setup How to Set the Program Edit ENGLISH Program edit enables users to edit the searched programs. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 Press 6 / Buttons to move to “CHANNEL” icon. Press button to select “CHANNEL” Icon. “AUTO PROGRAM” is highlighted. Press / Buttons to move to PROGRAM EDIT”. Press button to select “PROGRAM EDIT”. The program table appears on the screen. One program table contains five programes.
Channel Setup Using the LNA(Low-Noise-Amplifier) Feature If the reception is clear, users don’t have to use this feature. If the signal is weak or distorted, try the followings. Press MENU button. Menu items appear on the screen. 2 3 4 5 Press button to select “CHANNEL” Icon. “AUTO PROGRAM” is highlighted. Press / buttons to move to “LNA”. Press / buttons to set to ON/OFF . ENGLISH 1 Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Function Setup 6 7 Press / buttons to move to “SOURCE”. Press / button, then source changes. ➟ see the refer supported PIP table. ENGLISH ➥ How To Directly Change Sub Source : Press SOURCE button. In case of PIP mode, go to step 8 if you need to set the “SWAP” of Main and sub pictures. 8 Press / buttons to move to “SWAP”, then Press buttons. ➥ How To Directly Set the SWAP : Press SWAP button. In case of PIP mode, go to step 9 if you need to set the “SIZE” of Sub picture.
Function Setup How to Set Key-Lock User can lock the control buttons on the front bottom of the TV. Press MENU button. Menu items appear on the screen. 2 3 4 5 Press button to select “Function” Icon. “PIP/TWIN” is highlighted. Press / buttons to move to “KEY LOCK”. Press / buttons to set to ON/OFF . ENGLISH 1 Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Function Setup Choosing the Your Languages ENGLISH Using the TV for the first time, users must select thier prefered language preference in order to display main menus and sub menus, etc. 1 Press MENU button. Menu items appear on the screen. 2 Press button to select “OSD” Icon. “LANGUAGE” is highlighted. 3 Press / buttons, then the menu changes in the following order.
Function Setup Selecting Teletext Display Options in ATV Mode When users have displayed a teletext page, they can have various options to suit their requirements.
Function Setup ENGLISH How to Set Clock, Sleep Time, ON/OFF Time 1 Press Menu button. Menu items appear on the screen. 2 3 4 Press button to select “OSD” Icon. “LANGUAGE” is highlighted. Press buttons to select “TIME”. Time menu appears, then “MANUAL CLOCK” is highlighted. 5 Press / buttons to move between Hour, Minute and AM/PM and Press / buttons to set Hour, Minute and AM/PM. Press / buttons to move to “TIME”.
DTV Channel Setup How to Search Automatically This function can be used to get the latest program data while the receiver is still in use. Through this function, the receiver searches for all the available program and saves them in the memory. Press MENU button. Menu items appear on the screen. 2 3 Press 4 Press buttons to select AUTO SCAN” Automatic Scan menu appears, then auto scan activates. While searching, you can see the following menu on the screen.
ENGLISH DTV Channel Setup 11 Press / buttons to select “Bandwidth”, and set the proper value for the selected Channel. 12 13 Press Up and Down buttons to move to “Scan”. 14 Press EXIT button to TV viewing or press MENU button to return to the previous menu. Press buttons to store all the entered channel data. Then you can get the following menu showing the scanning process. After scanning process, the first channel of scanned channel will be displayed.
DTV Channel Setup How to Use the Guide (EPG : Electronic Program Guide) Users can check the channel information on the channels of the transponder they are watching. Press MENU button. Menu items appear on the screen. 2 3 4 5 Press 6 / ENGLISH 1 Buttons to move to “DTV CHANNEL” icon. Press button to select “DTV CHANNEL” Icon. “AUTO SCAN” is highlighted. Press / Buttons to move to “GUIDE”. Press buttons to select GUIDE” Program Guide menu appears.
DTV Channel Setup How to Select Channel List ENGLISH Users can change the current channel to any other channel they want. 1 2 3 4 5 6 7 8 Press MENU button. Menu items appear on the screen. Press / buttons to move to “DTV CHANNEL” icon. Press button to select “DTV CHANNEL” Icon. “AUTO SCAN” is highlighted. Press / buttons to move to “CHANNEL LIST”.
DTV Channel Setup How to Use Channel List Mode Users can see variant channel lists which may enable them to edit and select channels more conveniently. ENGLISH Press CH. LIST button. Channel list appears on the screen. 1 2 3 Select required option by pressing the buttons to select you want. 4 Press buttons. You will see the following mode. Press “ORANGE” button, then you can see “Channel List Mode” window. / buttons, then Press / ♦ Favorite Mode : You can see favorite 1 ~ 5 channel list.
DTV Channel Setup How to Set the Channel Order ENGLISH Users can organize the number or sequence of the channels. 1 2 3 4 5 6 Press CH. LIST button. Channel list menu appears on the screen. Press / or / buttons to select the channel you want to move. Press “YELLOW” buttons. Press / or / buttons to move to the position you want to move. Press buttons, the channels will move automatically to the programmed position. Press MENU, EXIT or button to finish the process.
DTV Channel Setup How to Add Channel Users add channels they want. Press CH. LIST button. Channel list menu appears on the screen. 2 3 4 5 Press WHITE buttons. The Add Digital Channel window will appear. Select the channels with / buttons or numeric keys. Select required option by pressing the keys to enter the proper value. Press MENU, EXIT or ENGLISH 1 / buttons, then Press numeric button to finish the process.
DTV Channel Setup How to TV/RADIO switching ENGLISH Users can use this menu when they want to change a TV channel to a Radio channel or vice versa. ➥ Press “TV/RADIO” button. Avoid listening to the radio for a long time, without changing the screen image. It can cause “Image Sticking”. Check “Image Retention Effect (Image Sticking)” at the begining of the manual. How to Subtitle / Audio Users can adjust the subtitle and audio condition/status of the current channel. 1 Press “S.MODE” button.
DTV Channel Setup How to Select Channel / Information Brief information is displayed, such as current channel type, name, local start/end time, guide information, current time, fav/normal mode, Audio mode and Audio ID. ✓ If you have no information : Check if your local time settings are correct or information is not sent by the channel provider. How to Set Teletext in DTV You can use Teletext service in iDTV mode. The icon on the screen means your TV is receiving Teletext service.
Memory Setup How to Use Memory Mode -* For Q320, Q400 Model only Please read the following instructions carefully before using it. ENGLISH Remaining for a long time in Memory mode (Still Image) can cause “Image Sticking”. Precautions when using a Memory Card Ensure to use a memory card labeled with the manufacturer’s name and manufacture number. Do not insert other objects such as a coin into the memory card slot, which may cause a malfunction. Do not drop or apply a shock to memory cards.
Memory Setup Supported Files Available memory card capacity Using a memory card with capacity larger than supported may cause an error. A very high capacity of a memory card may result in slow speed. Some non-supported Jpeg or MP3 files may not be played back. USB 1.1 HOST USB HDD, Flash Memory Bar MP3 Player (Available only in portable disk mode) Cellular Phone (Available only in portable disk mode) Power Supply Make sure to use TV USB power for USB HDD with 2.5” or less. Never use separate power.
Memory Setup Using a Memory Card ENGLISH 1. Insert a memory card or USB memory into Slot 1/2 or USB port. 2. Press 3. Press to power on. to select Memory Mode. Memory Card Slot 2 (CF) 4. Refer to icons listed below menu screen to manipulate. CAUTION ! When you are going to remove the memory card, press the button on the remote control. You can go back to the initial screen anytime to remove the memory card safely while keeping the damage to stored data to a minimum level.
Memory Setup Viewing the stored photo files ENGLISH Current page/All pages Mode Card type/capacity Preview Manipulation buttons Viewing full-size photos 1. Press Press to move a photo file you want. to select. To the icon menus, press the button. 1) JFIF - As decording is required when making a listing, decording time is different according to file sizes.
Memory Setup Viewing full-size photos ENGLISH Whenever you press from the current screen, magnifying powers are shifted in sequence 1X(original size). After zooming in a photo, press to move. 1.5X 2X 2.5X Rotating a photo To rotate the photo by 90 degrees clockwise, press counterclockwise, press button. To rotate the photo by 90 degrees button. Viewing images using Slide Show 1. Press to display Option Menu. 2. Press to move between items and press to change. 3.
Memory Setup Viewing the stored music files ENGLISH Artist/File size Selected file/All files Mode Card type/Capacity File name/Playing time Manipulation buttons When you press , the slide show function starts playing back music files according to the selected options in photo mode. Media music file name File information Playing back music files 1. Press 1. Press to display Option Menu. to play back. Whenever you press , you can set Repeat 1 Play Sequence.
Memory Setup ENGLISH Checking the stored movie files Playing time/File creation date File order/All files Playback mode Mode File name/Playing time Card type/Capacity Manipulation buttons You can set to play back all files (Play Sequence) or selected file (Play One) in sequence by pressing . Playing back movie files 1. Press to move to movie file you want. 2. Press to select a movie file to play back. To hide the icon menus on the bottom of the screen, press .
Memory Setup ENGLISH - Slow access may take place according to card types (MMC/MS). This may result in interruption of a motion picture being played back. - When playing back a motion picture stored in a USB memory, an interruption may take place. This phenomenon is not because the product yields its low performance but because the transmission speed differs depending on the USB memory types.
Appendix How to Use an External Device Using the Remote Control ENGLISH When setting other manufacturer s product using the remote control, some of the buttons on the remote control may not operate or different functions may be activated, or some of other manufacturer s products may not work. Some of DVD/VCR combos are allowed only either in DVD mode or VCR mode. 1. Turn on the external device you want to set. 2.
Appendix DVD Setting Number Table ENGLISH Satellite Receiver Setting Number Table 60
Appendix ENGLISH Troubleshooting Installation Problems Symptom Possible solution How can I install an antenna? Refer to page 20. TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter). Picture Problems Symptom Neither picture nor sound comes up.
Appendix Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. ENGLISH After setting the time, I turned TV off and turn it on. The programmed information has been erased. Sound Problems Symptom Possible solution Too much noise occurs. Check whether the audio setting is in the Stereo mode.
Appendix Product Specifications Q261 Q321 / Q320 Q401 / Q400 Full-Scart 1 (A/V) 1 (A/V) 1 (A/V) Half-Scart 1 (A/V) 1 (A/V) 1 (A/V) S-Video 1 (A/V audio common) 1 (A/V audio common) 1 (A/V audio common) Video (RCA) 1 (Audio included) 1 (Audio included) 1 (Audio included) Component(Y/Cb/Cr) 2 (Audio included) 2 (Audio included) 2 (Audio included) Antenna 1 1 1 PC Connection jack D-SUB D-SUB D-SUB Max.
Appendix Product Specifications Q421H Q501 Input Full-Scart 1 (A/V) 1 (A/V) 1 (A/V) Half-Scart 1 (A/V) 1 (A/V) 1 (A/V) S-Video 1 (A/V audio common) 1 (A/V audio common) 1 (A/V audio common) Video (RCA) 1 (Audio included) 1 (Audio included) 1 (Audio included) Component(Y/Cb/Cr) 2 (Audio included) 2 (Audio included) 2 (Audio included) Antenna 1 1 1 D-SUB D-SUB PC Connection jack D-SUB Max.
ENGLISH Appendix 65
