User's Manual Part 1

Audio system
434
Pairing a second Bluetooth
®
device
Press the [SETUP] button on the
audio system ➟ Select [Phone] ➟
Select [Connections] ➟ Select [Add
New Device].
- The pairing procedure from this
point is identical to [Pairing the first
Bluetooth device].
✽ NOTICE
• Bluetooth
®
standby mode lasts for
three minutes. If a device is not
paired within three minutes, pair-
ing is canceled. Start over from the
beginning.
• For most Bluetooth
®
devices, a
connection is established automat-
ically after pairing. Some devices,
however, require separate confir-
mation when connecting after
pairing. Be sure to check your
Bluetooth
®
device after pairing to
confirm that it has connected.
Connecting Bluetooth
®
devices
If there are no connected devices
Select the [PHONE] button on the
audio system or the [CALL] button in
the steering wheel remote control ➟
List of paired Bluetooth
®
devices ➟
Select the desired Bluetooth
®
device
from the list ➟ Connect Bluetooth
®
.
K_YP 17MY_G4.0AB[EG]AUDIO_NNG006,NPG011:YF eng 4c-Audio.qxd 7/27/2016 4:54 PM Page 34