User's Manual

Audio system
155
DAB Mode
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [MENU/CLOCK] button on
the control panel to access the fol-
lowing menu options:
• Traffic announcement: Activate
or deactivate traffic announce-
ments. Announcements and pro-
grammes will be received automat-
ically if available.
• List: Display all available radio sta-
tions.
• Scan: The system searches for
radio stations with strong radio sig-
nals and plays each option for
about five seconds.
• Sound Settings: You can change
the settings related to sounds,
such as location where sound will
be concentrated and the output
level for each range.
- Position: Select a location
where sound will be concentrat-
ed in the vehicle. Select Fade
(Fader) or Balance, turn the
[TUNE] knob to select the
desired position, and then press
the knob. To set sound to be cen-
tred in the vehicle, select Centre.
- Equaliser (Tone): Adjust the out-
put level for each sound tone
mode.
- Speed dependent vol.: Set the
volume to be adjusted automati-
cally according to your driving
speed.
✽ NOTICE
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or ampli-
fier specifications applied to your
vehicle, available options may vary.
• Mode popup: Set to display mode
selection window when the
[AUDIO] button is pressed on the
control panel.
• Date/Time: You can change the
date and time that are shown on
the system display.
- Set date: Set date to display on
the system display.
- Set time: Set time to display on
the system display.
- Time format: Select to display
time in the 12 hour format or the
24 hour format.
- Display (Power Off): Set to dis-
play the clock when the system
power is off.
• Language: You can change the
display language.
K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 15