User's Manual
Table Of Contents
Audio system
195
Using the USB mode
You can play media files stored in
portable devices, such as USB stor-
age devices and MP3 players. Check
compatible USB storage devices and
file specifications before using the
USB mode.
Connect your USB device to the
USB port in the vehicle.
• Playback starts immediately.
• Press the [AUDIO] button on the
control panel to display the mode
selection window, turn the [TUNE]
knob to select USB and then press
the knob.
(1) Current file number and total
number of files
(2) Playback time
(3) Information about the song cur-
rently playing
Press the [MENU/CLOCK] button on
the control panel to access the fol-
lowing menu options:
• List: Access the file list.
• Folder List: Access the folder list.
• Information: Display information
about the song currently playing.
• Sound Settings: You can change
the settings related to sounds,
such as location where sound will
be concentrated and the output
level for each range.
- Position: Select a location
where sound will be concentrat-
ed in the vehicle. Select Fade
(Fader) or Balance, turn the
[TUNE] knob to select the
desired position, and then press
the knob. To set sound to be cen-
tred in the vehicle, select Centre.
- Equaliser (Tone): Adjust the out-
put level for each sound tone
mode.
- Speed dependent vol.: Set the
volume to be adjusted automati-
cally according to your driving
speed.
• Song information (Media Display):
Select information such as
Folder/File or Artist/Title/Album
to display when playing MP3 files.
• Mode popup: Set to display mode
selection window when the
[AUDIO] button is pressed on the
control panel.
✽ NOTICE
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or ampli-
fier specifications applied to your
vehicle, available options may
vary.
K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 19