User's Manual

Audio system
255
Deleting paired devices
If you no longer want a Bluetooth
device paired or if you want to con-
nect a new device when the
Bluetooth device list is full, delete
paired devices.
1. From the control panel, press the
[PHONE] button, and then select
Phone  Delete devices.
2. Turn the [TUNE] knob to select the
device to delete, and then press
the knob.
3. Press the [1 RPT] button to select
Yes.
✽ NOTICE
• When you delete a paired device,
the Call history and Contacts stored
in the system are also deleted.
• To re-use a deleted device, you
must pair the device again.
Using a Bluetooth audio
device
You can listen to music stored in the
connected Bluetooth audio device
via your vehicle’s speakers.
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select Bluetooth audio and then
press the knob.
(1) Information about the song cur-
rently playing
1. Press the [MENU/CLOCK] button
on the control panel to access the
following a menu option.
2. Turn the [TUNE] knob to select
option and then press the knob.
• Sound Settings: You can
change the settings related to
sounds, such as location where
sound will be concentrated and
the output level for each range.
- Position: Select a location
where sound will be concen-
trated in the vehicle. Select
Fade (Fader) or Balance, turn
the [TUNE] knob to select the
desired position, and then
press the knob. To set sound
to be centred in the vehicle,
select Centre.
- Equaliser (Tone): Adjust the
output level for each sound
tone mode.
- Speed dependent vol.: Set
the volume to be adjusted
automatically according to
your driving speed.
✽ NOTICE
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or ampli-
fier specifications applied to your
vehicle, available options may vary.
K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 25