CAR MULTIMEDIA SYSTEM USER'S MANUAL 북미/영어-English D9EG01 (북미/영어-English)
Thank you for purchasing this multimedia system. Precaution for safe usage • This user's manual explains how to use the Kia Motor multimedia system. Before using the product, read the contents of this user's manual carefully and use this product safely. • • • The screens shown in this manual may differ with the actual screens of the product. The design and specification of this product may change without prior notification for product improvement.
Read the following safety cautions for your safety Before using the product, read the contents of this user's manual carefully and use this product safely. Notations used within this User's Manual WARNING • Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle.
Table of Contents 1. Basic 2. Radio/Media Warnings and Cautions .............. 1-2 FM/AM............................................ 2-2 Key Product Features.................. 1-4 Accessing FM/AM Mode …………… 2-2 Component Names and Functions ...................................... 1-5 HD Radio™ Technology ............. 2-4 Head Unit ……………………………… 1-5 Steering Wheel Control ……………… 1-7 Starting the System for the First Time ........................................
3. Bluetooth 4. UVO eServices Before Using the Bluetooth® Handsfree...................................... 3-2 The 911 Connect feature may not operate in the following situations. ...................................... 4-2 My Car Zone................................ 4-12 About UVO eServices .................. 4-4 Parking Minder ........................... 4-14 Before using UVO eServices....... 4-5 Sending Parking Location ……………4-14 Connecting Bluetooth................. 4-5 eServices Guide .........
5. Voice Recognition What is Voice Recognition? ....... 5-2 Precautions Required for Successful Voice Recognition ... 5-2 Starting/Ending and Setting Voice Recognition .................................. 5-3 Starting Voice Recognition …………… Ending Voice Recognition …………… Quick Run of Voice Recognition (Manual Mode) ……………………… Extending the Listening Time ………… Skipping Prompt Messages ………… Adjusting Voice Recognition Volume … 5-3 5-3 5-3 5-4 5-5 5-5 Voice Recognition Screen Overview .........................
8. Setup Screen Saver Settings................ 8-12 9. Appendix Setup .............................................. 8-2 Connectivity Settings................. 8-13 Product Specification.................. 9-2 Sound Settings.............................. 8-3 iOS Connectivity ………………………8-13 Android Connectivity …………………8-13 Troubleshooting ........................... 9-4 Display Settings ............................ 8-3 Phone Settings..............................
CAUTIONS upon Using SD Cards •Ejecting and Inserting SD Cards • Ejecting and inserting SD cards while the multimedia system is operating may result in SD Card or System errors. To eject or insert the SD card, first turn off the multimedia system and the vehicle ignition. • Eject/insert SD cards only to update the multimedia system with a new version. •Usage of SD Cards • The SD Card is formatted to include only Map and new system update files. • The SD Card cannot be used to save and play Music.
iPod ® HD Radio™ Technology ® iPod is a registered trademark of Apple Inc. HD Radio™ Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. ® Bluetooth Wireless Technology ® The Bluetooth Wireless Technology word mark and logos are registered trademarks owned by Bluetooth ® Wireless Technology SIG, Inc. and any use of such marks by Kia is under license.
part.
Basic Safety Warnings • Please refrain from use if the screen • Some functions other than the one is blank or no sound can be heard as mentioned above cannot be used while • Do not stare at the screen while driv- these signs may indicate product mal- driving. These functions operate only ing. Staring at the screen for prolonged function. Continued use in such con- when the vehicle is parked. periods of time could lead to traffic acci- ditions could lead to accidents (fires, dents.
Safety Cautions • Pay attention to the volume setting when • Do not subject the device to severe turning the device on. A sudden output shock or impact. Direct pressure onto Pay attention to traffic conditions while of extreme volume upon turning the the front side of the monitor may cause driving. • Operating the device while driving could device on could lead to hearing impair- damage to the LCD or touch screen.
Key Product Features This device is a Multimedia system that supports Radio (FM, AM), HD Radio™ technology, SiriusXM™, USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment. Display Wide TFT-LCD Display • Provides high quality video through a Wide TFTLCD Display using an LED Back Light. • Touch screen for maximum user convenience.
Component Names and Functions Head Unit PWR/ VOL TUNE RADIO Description • When power is off, press to turn the power on. • When power is on, press and hold for over 0.8 seconds to turn the power off. • When power is on, press shortly for less than 0.8 seconds to turn Audio off. • Turn left/right to adjust the volume. • FM/AM mode: Changes the frequency. • SiriusXM™ mode: Changes the channel. • MEDIA (USB/iPod/My Music) mode: Changes the track, file or title (except USB Image, Bluetooth Audio, and AUX).
Head Unit Name SEEK TRACK 1-6 I Basic Description When the key is pressed shortly (for less than 0.8 seconds), • FM/AM mode: Plays the previous/next frequency. • SiriusXM™ mode: Changes the channel. • MEDIA (USB/iPod/My Music) mode: Changes the track, file or title (except for USB Image and AUX). When the key is pressed and held down (for over 0.8 seconds), • FM/AM mode: Continuously changes the frequency until the key is released.
Name VOL+ VOL- MODE Description Controls the volume • Each time this key is pressed, mode is changed in the following order: FM → AM → SiriusXMTM → USB, iPod or Apple CarPlay → AUX → Bluetooth Audio → My Music → Android Auto → Pandora → FM • If the media is not connected, the corresponding modes will be disabled • Press and hold the key (more than 0.8 seconds) to turn the Audio system on/off • When power is off, press the key to turn power back on When keys are pressed quickly. (less than 0.
Steering Wheel Control Name Description When pressed quickly. (less than 0.8 seconds) • Activates voice recognition When pressed and held. (more than 0.8 seconds) • Ends voice recognition • Activates Siri Eyes Free When pressed quickly. (less than 0.8 seconds) • When pressed in the dial screen, makes a call • When pressed in the incoming call screen, answers the call • When pressed during call waiting, switches to waiting call (Call Waiting) When pressed and held. (more than 0.
Starting the System for the First Time Turning the System On/Off NOTICE System Reset • Cannot operate the system while it is booting up. It may take some time for all of features of the system, particularly the voice recognition system, to be ready for use. Press the engine start button or set the ignition key to On or ACC. Each time you Pressing and holding the power key on the turn on the system, a boot logo and safety head unit will turn off the system. warning will appear.
Battery Warning Message Always use the system while the car Restrictions on Features for Safety Measures engine is running. If you turn on the sys- Several features are limited while driving. tem while the engine is off, a battery warn- The restriction screen will disappear when ing message will appear. When the engine shifting gears into P or putting the parking starts, the message will disappear. brake on.
Home Screen Information Display on the Status Bar Controls Menu Configuration for the Home Screen Displays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of system status details and events. Icon Description Displayed when the audio is muted. Displays the remaining battery of the Bluetooth phone. Displayed when connected to Bluetooth for handsfree.
Adding Your Favorite Menu Items to My Menu From the Home screen, select and then Edit My Menu ▶ On-Screen Touch Controls Drag & Drop Learn how to touch the screen to operate Select a menu or item you want, then drag the system. and drop it to where you want to place it. . From the Edit My Menu screen, select Select menu items from the list on the right, then Tap lightly on a menu or an item to select it. drag and drop them to a desired place on the left.
Flick (Quick Scrolling) Drag the frequency bar to the left or right You can view the previous or next image to move to the frequency that you want. by flicking left/right on an image on the Quickly moves up and down in the list. USB Image screen. NOTICE • Moving the list when there are many items will display a handler on the right of the display.
Press and Hold Pressing the and buttons in the music or video player will fast forward/rewind the music or video.
part.
Radio/Media FM/AM Accessing FM/AM Mode You can access the radio player either by pressing the RADIO Features Description Preset Frequencies • The stored preset frequencies are displayed for user selection. • After selecting frequency, press and hold the preset button for over 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button.
Description Displays an active mode from Scan and Preset Scan modes. Band Changes to the desired band from among FM, AM, and SirusXM. HD Radio Used to set whether to turn HD Radio™ reception On or Off. Scan Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. SEEK/TRACK • Pressing this button shortly (for less than 0.8 seconds) : Seeks the previous/next frequency. • Pressing and holding this button (for more than 0.
HD Radio™ Technology If an HD Radio™ broadcast is received, the radio mode will switch from analog Program Service Data : broadcast to HD Radio™ broadcast. Contributes to the superior user experience of HD Radio™ Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Adjacent traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.
Name HD Radio™ Reception &Channel Buttons Description Displays main HD Radio™ channels and used to directly select the current available channels. The HD Radio™ related icon display becomes active within regions where an HD Radio™ signal can be received. Name Description HD Channel Number HD channel number that is stored in presets. HD Broadcast Info Displays detailed information about the current broadcast. If the HD Radio is turned on, the information for album art, artist, and song appears.
SiriusXM™ Mode Display Controls 2-6 I Radio/Media Features Description Preset Frequencies • Shows the stored presets for user selection. • After selecting frequency, press and hold the preset button for over 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. Channel Logo Displays the current channel logo. Channel Info Displays the current channel number and name.
Description Pauses/plays the current broadcasting program. Skip/Forward Moves to the next segment. Tag Saves the current music’s tag information to the head unit. If connected to iPod, the tag information can be saved on the device. Presets Shows the stored presets for user selection. SoundHound Runs the SoundHound feature. For more information, please see the SoundHound section in Info part. List Moves to the channel list. Menu • What is on My Presets? The program schedule saved in my preset.
Selecting through Channel/Category List Press the List ▶ Select the desired cat- egory and channel. If you select the Skip scan channels using the key or the button, you can SEEK TRACK TUNE knob by skipping the channels that you chose to skip. Viewing Menu Using the Menu button on the right, you can view the program schedule and information about the Featured Favorites provided by SiriusXM™ . Direct Tune Enter the number of the channel you want to receive.
What is on My Presets? (Program Schedule) Name Description By selecting this option, you can select a broadcasting date and time zone. Broadcast information will be provided for one week from the current date. Change Broadcast Date Preset ules of broadcast channels listed in the presets. Broadcasting You can select the time that you want. Time Shows you the program titles to be broadcasted at the time that you have chosen. Select a program to see more details.
Featured Favorites Featured Favor ites feature allows SiriusXM™ to broadcast additional presets • Example 1 : "Martha's Favorites" may represent Martha Stuart's favorites presets on her radio • Example 2 : During holidays, "Holiday Music" may represent all the SiriusXM™ channels that are playing the holiday music for easy access by users Multiple sets Featured Favorites data can be broadcast by SiriusXM™ and can change from time to time 2-10 I Radio/Media
USB Before Playing a USB MP3 Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on. • Take caution so that the USB connector does not come in contact with body parts or objects. • Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction. • Make sure to connect/disconnect external USB devices with the audio power turned off.
• The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device. • Charging through the USB may not work for some mobile devices. • The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory. • The device may not support normal operation when using formats such as HDD Type, CF, or SD Memory.
USB MP3 Information and Precautions Name MP3 File Specification Recommended Bit Rates and Sampling Frequency Description Supported Image Specifications Name Description Specification : MPEG1 AUDIO LAYER 3 Image format JPG, GIF, BMP, PNG (animated GIF, etc. are not supported) Acceptable sampling frequency : 32, 44.
USB Music Features Features Displays current operating mode File Index Shows the current file/total files within the USB Repeat/ Shuffle/Scan From Repeat/Shuffle/Scan, displays the current operating function Play Time Displays the current play time/total play time Song Info Displays the information of the current track • When a track in the file tab on the list screen is selected : Displays folder, file, title, artist, album info • When a track in the other tabs on the list screen is selected : D
Features Scan Menu SoundHound Runs the SoundHound feature. For more information, please see the SoundHound section in Info part. SEEK/TRACK If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current track from the beginning • If play time is less than 3 seconds, moves to previous/next file • If play time is over than 3 seconds, play the current file from the beginning If button is pressed (over than 0.
Features Features Displays folder/category name in the list Current Song Displays current playing file name Back Button Converts to basic mode screen Upper Folder/ Category Moves to Upper Folder 2-16 I Radio/Media Menu Search Menu Search tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album. If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK If button is pressed (less than 0.
Features Description Mode Displays current operating mode Folder/File Name Displays folder name where image is located File Index Shows the current file/total files within the USB Slideshow images as slideshow in 5, 10, 20, 30 second intervals Rotate Rotate image in clockwise direction Info Shows the file name, resolution and file type of current image Adjust Image Size Enlarge/reduce (zoom-in/zoom-out) image size List Moves to the list screen Previous/ Next image Swipe image left or righ
Features 2-18 I Radio/Media Description Current File Displays current playing file name Back Button Converts to basic mode screen Menu Now Playing : When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file) SEEK/TRACK Controls background mode • Radio mode : Changes Frequency and Channel • Media mode : Changes Track (excluding AUX) TUNE Controls background mode • Radio mode : Changes Frequenc
iPod Using iPod Devices • If repeatedly connect and disconnect • To listen to the iPod sound, reconnect iPod/iPhone to the Multimedia system the USB cable or change the audio out- with USB cable in short time, it may put settings in iPod/iPhone to Dock. • iPod is a registered trademark of Apple Inc. • iPod mode will not operate if the con- cause abnormal operation.
• When connecting with the iPod cable, • In Apple’s iOS 6.0 version or later, make sure to fully insert the jack to pre- Podcast and Audiobook media files vent communication interference. If the are designed to be played with the iPod is connected to the vehicle while it Podcasts and iBooks applications spe- is playing, a high pitch tone may sound cifically designed for Apple products. If for about 1~2 seconds immediately after the Apple device does not provide the connection.
• If you control pause, repeat, shuffle, or • We recommend that your Apple device seek songs when the play time is when uses the latest firmware since some • While using a connected iPhone/iPod the play time is less than 3s before fin- problems may occur due to an outdated Touch device, it may not operate nor- ished playing, it may occur difference of firmware or other software related mally if the user changed some func- playing song between the Multimedia issues. tions in the device.
Caution • If connect to the Multimedia system while podcast or iTunes music down- • If the iPhone/iPod Touch supports loading to iPod/iPhone, it may occur Bluetooth, it is unable to use Bluetooth some problems when you select song Audio if the Apple device that is con- in the list. Reconnect iPod/iPhone to the nected to the Multimedia system Multimedia system when downloading through both USB connection and is finished or the file deleted. Bluetooth.
Features Features Description Previous File If button is pressed (less than 0.8 seconds) : Moves to the previous file or play the current file from the beginning (Depends on the play time) • If play time is less than 3 seconds, moves to previous file • If play time is over than 3 seconds, play the current file from the beginning If button is pressed (over than 0.8 seconds) it rewinds the track Play/Pause Plays/pauses the current file Next File • If button is pressed (less than 0.
2-24 I Radio/Media Features Description SEEK/TRACK If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning • If play time is less than 3 seconds, moves to previous/next file • If play time is over than 3 seconds, plays the current file from the beginning If button is pressed (over than 0.8 seconds) it will rewind/fast-forward the track TUNE TUNE knob to search a desired Turn the track.
Description Displays the category name Category List Displays the contents of selected category If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly. Back Button Converts to basic mode screen Upper Folder Moves to Upper Folder Search Menu Search tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook .
AUX Connecting an External Device If an external device connector is connected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored. • AUX mode can be used only when an external audio player has been connected. • The AUX volume can also be controlled separately through the connected device.
Bluetooth Audio Mode Features Description Mode Displays current operating mode Phone Name Displays name of connected phone Artist Info Name of current artist Title Name of current song Previous File • If play time is less than 3 seconds, moves to the previous file • If play time is over than 3 seconds, plays the current file from the beginning This function may differ depending on the model of mobile phone Play/Pause Plays/Pauses Bluetooth Audio Next File Moves to the next file Menu • Conn
Bluetooth Connections Settings Settings for pairing, connection and disconnection of a Bluetooth device • In Bluetooth Audio play screen, select Menu and then Connections . • Select SETUP key in the head unit. ▶ Select Phone . ▶ Select Bluetooth Connection 2-28 I Radio/Media i Information • If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode.
Features Features Description Previous File If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time) • If play time is less than 3 seconds, moves to previous file • If play time is over than 3 seconds, play the current file from the beginning If button is pressed (over than 0.8 seconds) it rewinds the track Play/Pause Plays/pauses the current file Next File • If button is pressed (less than 0.
Features Features Shuffle 2-30 I Radio/Media Description Plays files in random order • If select the song in the file tab on the list screen : Press the Shuffle button to switch between and turning shuffle off shuffle • If select the song in the other tabs (Playlist, Artist, Song, Album, Genre) on the list screen : Press the Shuffle button to switch between and turning shuffle off shuffle Description Scan Scans the beginning parts of files (approx.
Features Description Folder/ Category Name Displays folder/category name in the list Category List Displays current playing file name Back Button Converts to basic mode screen Upper Folder Moves to Root Folder Description Menu • Add to Playlist : Adds the current track to the Playlist : Playlist is placed on the left tab in the list (Maximum 100 files) Select a track and press “Add to Playlist” to add the track in the playlist • Delete from Playlist : Select a track from the playlist and press “
MEMO
part.
Bluetooth Before Using the Bluetooth® Handsfree ® What is Bluetooth Wireless Technology? ® • Bluetooth Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance. • Supported within PCs, external devices, ® Bluetooth phones, PDAs, various electronic devices, and automotive environ® ments, Bluetooth Wireless Technology to be transmitted at high speeds without having to use a connector cable.
CAUTIONS upon Connecting Bluetooth® Phone • If you do not want automatic connection • Before connecting the head unit with Bluetooth feature off of the Bluetooth the mobile phone, check to see that the ® ® with your Bluetooth device, turn the ® ® • The Handsfree call volume and quality may differ depending on the mobile phone. ® • Pairing Bluetooth devices and use of device.
Bluetooth Connection Pairing a New Device Before you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car. Pairing a New Device Through the Phone Settings Select key in the head unit. ▶ . ▶ Select Bluetooth Connection . SETUP Select Phone ▶ Select Add New . ▶ Pair your car after Up to 5 Bluetooth devices can be paired. your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the Only one Bluetooth device can be con- authorization popup.
Select SETUP key in the head unit. ▶ Select Phone . ▶ Select Bluetooth Connection . ▶ Select the name of the device to connect. ▶ Connect Bluetooth. Disconnecting Bluetooth Devices Deleting Bluetooth Devices Deletes the Bluetooth devices that you Disconnects Bluetooth devices that are added. Note that deleting a Bluetooth connected. device will delete all Call History and Contact Info downloaded along with it. Select SETUP key in the head unit. ▶ Select Phone . ▶ Select Bluetooth Connection .
Bluetooth Phone Phone Status Icons Shows the current phone status in the right top of the display. Icons Description You can use Bluetooth phones when a Bluetooth Hands-free connection is established. You can use Bluetooth audio features when a Bluetooth audio connection is established. You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.
Name Keypad Delete Delete the numbers that you entered. Settings Moves to a screen of Phone Settings. If there is an incoming call after you made will appear. Call Makes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again. connected. PHONE key in the head unit or key in the steering wheel remote control. • You can also select full screen display ▶ All Menus Phone .
Using the Menu During a Phone Call When making a call, you can use the following menu items. 3-8 I Bluetooth Name Description Use Private Switches a voice call from the car Hands-free to the mobile phone. End Ends a call. Contacts Displays the Contacts list. Outgoing Volume Displays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5). Keypad Moves to a screen for entering ARS numbers. Switch Switches to a call on hold, if any.
Select then PHONE Call History key in the head unit ▶ and . Name Description All Lists the all call history. Dialed Lists the calls that you made. Received Lists the calls that you have received. Missed Lists the calls you missed. Call History Displays all of your call history. Select from the list to dial the number. Information Displays the details of your call history information. Download Downloads the call history information from your mobile phone.
Contacts Select then PHONE Contacts 3-10 I Bluetooth Name Description Contacts List The list of Contacts. Select from the list to dial the number. Information Displays contact information. Download Downloads contacts from your mobile phone. Search by Name Searches Contacts for the name that you enter. Search by Number Searches Contacts for the number that you enter. Add to Favorites Adds a phone number to Favorites.
Favorites Select then PHONE key in the head unit ▶ and Favorites . Name Description Favorites Lists the phone numbers saved as Favorites. Select from the list to dial the number. Add New Adds a new number to Favorites. Delete Items Deletes numbers that you select from Favorites. Delete All Deletes all of the numbers from Favorites. 03 • Some devices require a device authentication for downloading your contacts. If download fails,check your phone screen and confirm the download if necessary.
MEMO
part.
UVO eServices The 911 Connect feature may not operate in the following situations When the vehicle ignition is not turned on ® When the system power supply is unstable When the phone Bluetooth feature is set to off When the attempted call is blocked due to user operations ® When the phone Bluetooth cannot be connected or becomes disconnected When the 9-1-1 call is unstable due to phone or other communication network issues When there are no phones paired with the vehicle When the call feature is not op
Using UVO eServices and Precautions Download the UVO eServices App and install it on your smartphone. The app can be downloaded from your smartphone’s app store. UVO eServices is fully compatible within some smartphones but may not operate properly within incompatible smartphones. To view the list of compatible smartphones, please visit MyUVO.com.
About UVO eServices i Information UVO eServices provides the following features through Bluetooth and through USB connection to your smartphone. Name Connection Description • 24-hour Roadside Assistance is a service plan provided by Kia Motors America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roadside Assistance, a connected mobile phone via Bluetooth within the cellular service coverage area is required.
Before using UVO eServices Connecting Bluetooth Press the key on the steering wheel PHONE Installing the UVO eServices App on your or press the smartphone vices system. Press SETUP ▶ 1. Download and install the UVO eSer- Pair a device from Bluetooth-enabled phone key on the UVO eSer- 1. Turn on the Bluetooth feature on your smartphone’s Bluetooth settings screen. PHONE ▶ Bluetooth Connection . 2. Wait for “KIA MOTORS” to appear on vices App on your smartphone.
Connecting to smartphone via USB Activating UVO eServices Press the UVO Vehicle Diagnostics Parking Minder 1. Connect your smartphone with the vehi- Press the key, then press the or My Car Zone Yes , then UVO eServices acti- vation process will begin. or button. cle via USB cable. NOTICE • For smartphone related inquiries, please visit MyUVO.com. \ NOTICE • Before activating UVO eServices, ensure your phone is connected to vehicle's USB input via USB cable 4-6 I UVO eServices
911 Connect Initiating a 911 Call If an airbag deploys, the following screen 911 Connect If an airbag deploys, your vehicle automat- is displayed and a call is automatically placed to 9-1-1 after 10 seconds. ically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator. The 911 Connect feature is available only when the mobile phone is connected via Bluetooth. By default, this feature is turned off.
The 9-1-1 operator may request informa- When the 9-1-1 operator attempts to call tion on the current location of your vehicle. the driver again, the call time is displayed When the 9-1-1 operator requests your and allows the driver to speak with the vehicle location, “Sending Location” is 9-1-1 operator. Roadside Assist Roadside Assist If there is any issues in the vehicle, you displayed on the screen and the vehicle can connect with a Roadside Assist agent.
Vehicle Diagnostics Press the UVO key ▶ Vehicle Diagnostics Conducting Vehicle Diagnostics Vehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked. It also requires that UVO eServices is If diagnostic issues are found, press the Send Report button to send to your MyUVO activated, and the Phone is connected Schedule Service via USB cable before starting Vehicle The Vehicle Diagnostics process will account or press the Diagnostics. begin.
Schedule Service Press the Preferred or Nearest button. Press the When scheduling an appointment using the Schedule Service button, pressing the Preferred Send Report Send Report in the vehicle diag- nostics result screen. button will allow you to request an appointment with your preferred Kia dealer and send your vehicle’s diagnostics information.
Scheduled Diagnostics after Vehicle Diagnostics, it is recom- If you have set up Scheduled Diagnostics mended that you send the diagnostic on your UVO eServices App, a vehicle results to your MyUVO account. Press the Send Report button to send the diagnostics check will automatically start diagnostics results to your MyUVO On the date of the Scheduled Diagnostics, account. the following window will be displayed. on the day you selected.
My Car Zone Press the vehicle’s powertrain is detected, Automatic My Car Zone is a feature that provides Curfew Limit Alerts History Diagnostics will be notified. alerts and driving history for Curfew Limit Automatic Diagnostics UVO key ▶ If a critical diagnostics issue with your Alerts and Speed Alerts set by the user. Name Description Curfew Limit Alert Curfew Limit Alerts are alerts that are triggered when a driver is driving within a predefined time range.
Curfew Limit Alert Curfew Limit Alert Speed Alert You can check the Curfew Limit Alert You can check the Speed Alert history for history for a list of past triggered curfew triggered speed limit alerts of the vehicle. alerts.
To check My Car Zone alert history from Parking Minder your smartphone, you must first send the alert history to your MyUVO account. Sending Parking Location The location where your vehicle is currently parked can be sent to your smartphone. The Parking Minder feature is only available when the ignition is turned on and the vehicle is parked. Ensure that the UVO eServices system is activated via USB with the UVO eServices App running on your smartphone before using this feature.
Once the parking location has been sent, eServices Guide you can view your vehicle’s location from the UVO eServices App on your smartphone. eServices Guide eServices Guide provides guidance on how to use UVO eServices. This feature is only available when the mobile phone is connected via Bluetooth. Press the key ▶ UVO eServices Guide NOTICE UVO eServices Settings Refer to SETUP ▶ UVO eServices Settings .
MEMO
part.
Voice Recognition What is Voice Recognition? Precautions Required for Successful Voice Recognition tem as ordered by recognizing your voice 1. Voice recognition supports only the command for operation of the multimedia commands that are displayed on the while you are driving the car. screen and written in the User's Guide. Regretfully, not all possible voice com- 2.
Starting/Ending and Setting Voice Recognition Starting Voice Recognition Press the key briefly (less than 0.8 Ending Voice Recognition 1. Select “Exit” to the left of the bottom to end voice recognition. Usually, you are supposed to say a com- 2. Press and hold (over 0.8 seconds) the key on the steering wheel control to end voice recognition. Quick Run of Voice Recognition (Manual Mode) mand to execute the desired operation after the voice guidance.
Extending the Listening Time When the system is waiting for your command, after the voice prompt and beep have been heard, if you press the voice recognition icon (shorter than 0.8 seconds), then the beep will sound again and standby mode will restart. When activated, voice recognition waits for your command for 5 seconds. If you say nothing for 5 seconds, a voice prompt will ask for your command again.
Skipping Prompt Messages When you hear the prompt message, Adjusting Voice Recognition Volume press the voice recognition icon on the During voice recognition, rotate the vol- steering wheel remote control to skip the ume knob to adjust the message volume. message and go directly to listening mode to say your command. This results in faster operation when you feel the message is too long or you 05 already know the command to use.
Voice Recognition Screen Overview Start Screen Name Description Most frequently used commands Displays the six most frequently used commands. Not available command Displays commands that are not available due to a failure in meeting the conditions for using them and thus need additional settings. The conditions required for using them will be described briefly under each command.
Instructions for Using Voice Recognition Description Detail instruction This section describes how to use voice recognition in detail. Close button Closes the screen and restarts voice recognition. 05 Name i Information • In the instructions screen, no voice is recognized, so you must manually issue commands. Because the instructions screen displays a lot of content, you can not view it while driving for safety precautions.
Voice Commands Types of Commands Voice recognition commands are classified as "Global Commands" Command Call Displays downloaded Contacts, after this you can make a call by saying the name. Call You can directly call a person by in the downloaded Contacts. Call on Mobile You can call a person directly to the number that is saved as “Mobile” in the downloaded Contacts. e.g.
Radio Commands Operation Radio Plays the most recent radio channels from FM, AM, and SiriusXM™. FM Plays FM radio. FM <87.5~107.9> Tunes to FM according to what you say. e.g.) FM 87.5: FM eighty seven point five SiriusXM Plays SiriusXM™ radio. SiriusXM <0~999> Tunes to SiriusXM™ Channel according to what you say. e.g.) SiriusXM 23: SiriusXM Twenty three AM Plays AM radio. AM <530~1710> Tunes to AM according to what you say. e.g.
Media Commands * Check the following before you use media commands. Command Continues the last media you played. iPod Plays the iPod currently connected. This will work the same when an iPhone is connected. If a USB is connected, then it will be played instead of the iPod. USB Plays the music on the USB currently connected. If an iPod is connected, then the iPod will be played instead of the USB. Bluetooth Audio Plays the music on the Bluetooth phone currently connected.
1. USB Music / iPod / My Music Command Command 2. Pandora Radio command Command Operation Operation Play Plays a selected file. Maintains the current settings during playback. ◯ Skip Moves to the next track. ◯ Thumbs up Pause Pauses a file that is playing. Maintains current settings while paused during playback. If you like the genre of the music currently playing, say “Thumbs up” so that more similar music will play. ◯ Thumbs down ◯ Shuffle Plays tracks or files randomly.
Other Commands List (Commands used in List / Help) Command Operation Help Moves to the voice recognition help screen. All available commands can then be identified and used. ◯ Line 1~4 (One~Four) When you cannot select a certain name, such as in Call History, you can select it using numbers. Simple numbers can be recognized, such as “One” or “Two." ◯ Yes / No When voice recognition is activated, this command is used when an answer is requested for a confirmation question.
How to start Siri How to use Siri When you access the Siri screen while pressing and holding key on the If you want to use Siri, you have to con- steering wheel, you can press nect your iOS device to Multimedia system ton and then you can speak what you through Bluetooth. want. Please see the Multimedia system (Please check whether your iOS device only supports “Phone” related functions.
MEMO
part.
Apps/Info Start Up Press the APPS/ Pandora Radio Mode key on the head unit to move to the information screen.
Name Description Mode Displays current operating mode. Station Info Shows the station name current playing. Track Info Shows the artist/title information current playing. Play Time Displays the current play time. Thumb Down If you don’t like the music current playing, press this button to move to the next music and to minimize the number of playbacks of similar genre music.
Name 6-4 I Apps/Info Description Menu • Bookmark Track Adds the music current playing to the bookmarks list. • Bookmark Artist Adds the artist of the music current playing to the bookmarks list. You can view your bookmarked artists and songs from your Pandora profile online. Go to pandora.com, then click on the “Your Profile” button above the player. That will bring up a page with your stations, bookmarked artists, and bookmarked songs. SEEK/TRACK Press briefly to play the next song.
Name Description Shows the name of the station current displayed. Shuffle Shuffling your stations provides a more diverse mix of music by randomly playing songs from the stations in your list. Search Menu Sorts stations by the items in the menu. • A-Z : Sorts stations in alphabetical order. • By Date: Sorts stations in the order they were generated. Shared Station Icon Indicates that the station is already shared. SEEK/ TRACK Press briefly to play the next song.
SiriusXM™ Data About SiriusXM™ Data Service The SiriusXM™ Data Service is a paid membership satellite radio service that provides users with information such as weather, fuel prices, stocks, sports and movies. However, weather information is not supported for vehicles purchased in Canada. 6-6 I Apps/Info Accessing SiriusXM™ Data SiriusXM™ Weather Announcement Press the “SiriusXM Data” icon after key to selecting All Menus or APPS/ At the “SiriusXM Data” screen, press enter the SiriusXM™ Data mode.
Weather Forecast Warnings and Advisories This service provides current weather This service provides weather warnings information and weather forecasts for the and advisories, such as tornado, storm, next five days in your region. To change flood, etc. as symbols on the Navigation the region, press the map. Other City button and 06 select the desired region.
SiriusXM™ Fuel Price Information Select the At the “SiriusXM Data” screen, press the Search for Nearby Stations, and Register Key Locations as Favorite Stations. “Fuel Prices” icon to enter the Fuel Prices Search for nearby stations with the with the “Favorite Stations” menu. Information mode. “Nearby Stations” menu. It shows station locations, starting from the nearest one, and select “Nearest” menu on the top right side to further sort them by price or brand name.
My Fuel Type Settings SiriusXM™ Stock Information My Favorites With the “Filters” menu, you can select In the “SiriusXM Data” screen, press the My Favorites shows a list of stocks added fuel types and favorite brands. “Stocks” icon to enter the Stocks mode. by the user.
Stock Search In the My Favorites screen, you can find SiriusXM™ Sports Information Use the Stock Search menu to search for the selected stock information that you Press the “Sports” icon to enter the Sports specific stocks. registered. mode. button after searching for This service provides real-time updated your favorite stocks to save them in “My Press the information on scores and schedules for Favorite”.
My Teams You can always check the list of teams Press the team name to check daily You can save teams which you are inter- that you added in the “My Teams” menu. results and recent schedules for that team. ested in as part of My teams to easily Press the view related scores and schedules. the team name to delete the team from “My Select the My Teams menu and then Teams” or press the press the other teams.
SiriusXM™ Movie Information mode. Search for Nearby Theaters, and Register Any Key Locations as Favorite Theaters. You can check recent movies and nearby In the “Nearby Theaters” menu, you can theaters, and also register your favorite search for any nearby theaters. theater locations. It shows theaters, starting from the near- Press the “Movies” icon to enter the Movie est one, and selecting the “Nearest” menu at the top right side will sort them by name.
Select the button to the right of the In the “Top Movies” menu, you can check list to register your favorite theater so that for any movies that are currently popular. Press button to the right of a movie ★ you can always check it again using the “Favorite Theaters” menu and selecting the button to view the current movie title to view the plot summary and any other detailed information. 06 information for that theater.
SoundHound SoundHound Main Screen SoundHound is a music search engine. It enables users to identify music by playing or singing a song. It is also possible to search by typing the name of the artist, song, album or lyrics. Accessing SoundHound 1. From the Home screen, select All Menus then select SoundHound button. 2. Select SoundHound button on Radio modes (AM, FM and SiriusXM) or Media modes (Bluetooth Audio, iPod, USB, My Music and AUX).
Recognizing Music After selecting SoundHound Searching Music button, the song recognition pro- Music can also be searched by selecting the Search option in cess is activated, the system will match current playing song with SoundHound main screen and typing a song, artist, album or lyr- the SoundHound music database. ics into the search field. Music from Smartphones and MP3 players that are not connected to head unit can also be recognized. Name Description Search Displays current operating mode.
Song Main Screen 6-16 I Apps/Info Name Description Back button Goes back to previous screen. Song, Artist and Album information Displays song, artist and album information of currently playing song. Album Image If album image is selected, the detailed information of the album is displayed. Artist Image If artist image is selected, the detailed information of the artist is displayed. Favorite It saves current playing song into Favorites by tapping on the star icon.
Apple CarPlay/Android Auto What is Apple CarPlay/Android Auto? Precautions • Apple CarPlay is a registered trademark of Apple Inc. • Android Auto is a registered trademark of Google Inc. You can securely manipulate your smart phone while driving by • Apple CarPlay or Android Auto is unavailable if the version using this feature.
• You cannot run Android Auto during a UVO eServices call but you can run Android Auto during a Bluetooth call. (However, you cannot use audio-related features in Android Auto mode.) • Apple CarPlay or Android Auto may not operate normally due to mobile phone issues. Using Apple CarPlay/Android Auto Features 1. With Apple CarPlay, connect the USB cable provided by Apple to your mobile phone. With Android Auto, connect the USB cable provided by the mobile manufacturer. 2.
key • With Apple CarPlay or Android Auto connected, press the on the steering wheel to run the phone function of Apple CarPlay or Android Auto. • The screens and features displayed on the audio system are the same as what Apple and Google originally provide. The screens and features are subject to change according to the policy of each individual company. Cautions when Using Apple CarPlay • When Apple CarPlay is activated, you cannot use Bluetooth.
Cautions when Using Android Auto • When Android Auto is activated, you can use only phone features among all Bluetooth features. You cannot use Bluetooth Media features such as Bluetooth Audio and Pandora. If you want to use such features, remove the USB cable before use. • Android Auto mode does not support the feature that enables you to search for music files by controlling the TUNE knob.
part.
Other Features Camera About Rear Detection Camera • This device is connected to a rear detection camera to see behind the car when reversing. • When the engine starts, shift the gear to R to activate the rear detection camera. • Shift the gear to another position to deactivate the rear detection camera. i Information • While the device boots up, shift the gear to R to activate the rear detection camera.
part.
Setup Setup Setup is the screen to control system settings of the Audio. To enter the screen, select the key of the device or the Setup SETUP button in All Menus. Feature Description Sound Provides the sound control options for Position, Bass, Mid, Treble, Advanced and Default settings. Display Provides the Mode/Illumination and Default settings. Phone Provides the Bluetooth Connection/Auto Connection Priority/Bluetooth System Information settings.
Sound Settings Adjusts the sound effects for the whole Advanced system. Select additional audio options such as “Speed Dependent Volume Control” that automatically controls Audio volume according to vehicle speed. Default Resets the sound to factory default settings. Beep Select to activate a beep when pressing buttons. Display Settings Adjusts the level of illumination for the entire system.
Phone Settings Bluetooth Connection Settings Select the Changes Bluetooth phone settings. Select Phone SETUP Feature key in the head unit ▶ ▶ Select Bluetooth Connection Paired Device List Bluetooth Audio Connection Status An icon appears when you make a Bluetooth Audio connection. Bluetooth Hands-Free Connection Status An icon appears when you make a Bluetooth Hands-free connection. Add New Register a new Bluetooth device. Delete Devices Select and delete a paired device.
Auto Connection Priority Select the Select Phone key in the head unit ▶ ▶ Select Auto Connection Priority . SETUP When the engine is running, the selected Bluetooth device is automatically connected. If you fail to connect the selected Bluetooth System Information Select the Select Phone Features Description Vehicle Name You can change the Bluetooth device name of the vehicle. Passkey You can change the passkey used for Bluetooth device authentication. the initial passkey is 0000.
i Information UVO eServices Settings • The device name above is an example. Check the actual information on the product. 911 Connect This feature is used to used to turn on or Within the eServices Settings screen, off the 911 Connect feature. UVO eServices related features can be set, such as activating 911 Connect, Parking Minder and setting the My Car Zone. For safety reasons, My Car Zone Settings can not be adjusted while driving. Park the vehicle before making any changes to your settings.
When enabing this feature, you must first Parking Minder My Car Zone agree to the 911 Connect tems of use. If you want to send vehicle location to your This feature is used to set My Car Zone After reading the tems of use, press the Agree button on the touch screen to smartphone automatically when you turn (Curfew Limit, Speed, Geo Fence) alert the ignition off, turn the Parking Minder feature ON . conditions.
This screen is used to turn Curfew Limit, Curfew Limit Alert Settings Speed Alert Settings Speed, and Geo Fence Alert features On/ Within Curfew Limit Alert Settings, you can Within Speed Alert Settings, you can set Off. set the Curfew Limit Alert Start and End the vehicle speed limit and Alert Interval of Time. You can also set the Alert Interval of alerts upon overspeeding. Set the alert conditions 8-8 I Setup ON ▶ Settings . alerts upon Curfew Limit.
PIN Press the This feature is used to change the PIN to PIN to your My UVO com account. enter My Car Zone Settings. OK button to transmit the new Restore Factory Settings This feature is used to restore all My Car Zone alert history and settings back to default state. NOTICE 08 • B e fo r e p r e s s i n g OK , e n s u r e yo u r smartphone is connected to UVO eServices system via USB cable.
Scheduled Diagnostics Trip Info Sync Reminder This feature is for setting when scheduled Trip Info is a feature used to set whether diagnostics alerts display. system displays alert when trip info(Driv- Press SETUP key ▶ Scheduled Diagnostics UVO eServices ON ▶ ▶ Voice Recognition Settings ing Distance, Driving Speed, Driving Time, Configure how to make a call with etc). reaches 90% of memory. Voice Recognition Guidance and Voice Settings Recognition.
Clock Settings Wi-Fi Settings Configure the settings for time and date. You can share a digital-device network Using the arrow buttons, you can change with the vehicle device through Wi-Fi. How to Connect to a Network 1. In the Wi-Fi settings of a digital device, activate Internet sharing (Hotspot). 2. In the vehicle network list, select the desired device to connect to. Enter the the values. password to connect, if any. Description Description Wi-Fi Turn on/off Wi-Fi.
Language Settings Keyboard Settings Screen Saver Settings You can configure the displayed system You can configure the keyboard layout for You can select any of the following screen language. each language. formats to be displayed when the screen or power is turned off. • Digital clock and date • Analog clock and date • No display When the language is changed, the You can configure ABCD or QWERTY system language is automatically keyboards for the system. changed.
Connectivity Settings In addition, the latest version of iOS must Android Connectivity have been installed. In the second con- If Android Auto is checked, you can use You can select the mode to run when an nectivity option, the connection can be the functions of your Android phone with iOS or Android device is connected. If not made through a USB cable or Bluetooth. a USB cable and Bluetooth connected. It selected, the mode does not run exclu- enables and activates the Android Auto sively.
i Information • The settings are allowed only after disconnecting any type of USB device including an iOS/Android device and a USB memory as well. • Pandora may not be used outside of the United States. • Regardless of using Android Auto or Apple CarPlay, when any iOS or Android device is connected with a USB cable, it basically starts charging.
part.
Appendix Product Specification TFT-LCD Common Screen Size Navigation Device - 8 inch(176.4 x 99.36mm) Name Car TFT LCD Display Navigation Unit Resolution Navigation Device - 384,000 pixels (Resolution: 800 x 480) Power Supply DC 14.4V Operating Power DC 9V ~ DC 16V Operating Method TFT(Thin Film Transistor) Active Matrix Current Consumption 2.5A Sleep Current 0.
Bluetooth® Wireless Technology CDMA Frequency 869MHz~894MHz (BC0), 1930MHz~1990MHz (BC1) Sensitivity -104dBm under (FER = 0.5% under) Frequency 824MHz~849MHz (BC0), 1850MHz~1910MHz (BC1) Max RF Output Power 23.01dBm ~ 30dBm (Power Class3(BC0), PowerClass2(BC1), conducted) RX TX Sensitivity -104dBm under(FER=0.5% under) Power 23.01~30dBm (BC0, BC1, conducted) Supported Bluetooth® Specification Frequency Range 2402 ~ 2480 MHz Supported Profile Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.
Troubleshooting Problem 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. Possible Cause Sound does not work in • Are the audio connector jacks fully AUX mode inserted into the AUX terminal? The external device is • Is the external device connected with a not working standard connector cable? 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your Kia dealer.
The power does not turn on The system does not play Possible Cause Countermeasure The fuse is disconnected • Replace with a suitable fuse • If the fuse is disconnected again, please contact your point of purchase or Kia dealer Device is not properly connected • Check to see that the device has been properly connected The vehicle battery is low • Charge the battery If the problem persists, contact your point of purchase or Kia dealer Problem Possible Cause Countermeasure The image color/tone qua
Problem Possible Cause Countermeasure • USB memory is damaged The USB does not work • Please use after formatting the USB into FAT 12/16/32 format • USB memory has • Remove any foreign subbeen contaminated stances on the contact surface of the USB memory and multimedia terminal • A separately pur• Directly connect the USB chased USB HUB is memory with the multimedia being used terminal on the vehicle • A USB extension • Directly connect the USB cable is being used memory with the multimedia terminal on
FAQ About Pairing Mobile Phones Q What is a Passkey? Q I cannot pair my mobile phone. What is the cause? ® A Check to see that the mobile phone supports Bluetooth func- A A passkey is the password used to authenticate the connection tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set between the head unit and mobile phone. The passkey only it to ON.
About Bluetooth® Wireless Technology/ Head Unit Use Environment About Making/Answering Phone Calls Q How can I answer a call? A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, press the Accept button on the screen or the To reject the call, press the A The wireless connection can be used within 15 yards. key on the steering remote controller.
Index AUX ……………………………………2-37 About Bluetooth ® Wireless Technology /Head Unit Use Environment …………10-8 About Disc ……………………………2-11 About Making/Answering Phone Calls… 10-8 About Pairing Mobile Phones …………10-7 About Rear Detection Camera ……… 8-4 About SiriusXM™ Data Service ……… 7-8 About Transmission and Reception of Radio Waves ………………………………… 4-3 Accept/Reject Call …………………… 3-7 Accessing FM/AM Mode …………… 2-2 Accessing SiriusXM™ Data ………… 7-8 Accessing SoundHound ………………7-16 Address ………………………………5-15 Adjusting V
Disconnecting Bluetooth Devices …… 3-5 Display …………………………………5-35 Display Route Information ……………5-31 Display Settings ……………………… 9-4 Download Center …………………… 7-6 Downloaded Apps Settings …………9-10 Driving Info …………………………… 4-6 H HD Radio™ Technology ……………… 2-4 Head Unit ……………………………… 1-5 Help Display…………………………… 6-6 Home Screen …………………………1-11 How to Connect to a Network………… 9-9 How to start Siri ………………………6-21 How to use Siri…………………………6-21 E Editing Route …………………………5-33 Ending Voice Recognition …………… 6-3 Extend
On-Screen Touch Controls ……………1-12 Operating Climate Mode……………… 8-2 Operating Navigation Screen ………… 5-2 Other Commands List (Commands used in List / Help) ………6-15 P Pairing a New Device ………………… 3-4 Pandora Radio Mode ………………… 7-2 Pandora Radio Mode Screen Controls …7-3 Phone Ringtone ……………………… 9-6 Phone Settings ……………………… 9-4 Phone Status Icons ………………… 3-6 Places …………………………………5-14 Precautions Required for Successful Voice Recognition …………………………… 6-2 Precautions for Safe Driving ………… 3-2 Precautions upon Ha
Starting/Ending and Setting Voice Recognition …………………………… 6-3 Steering Wheel Control ……………… 1-7 Stolen Vehicle Recovery ……………… 4-5 Supported Disc Formats ………………2-12 Supported Image Specifications………2-24 System Info ……………………………9-11 System Reset ………………………… 1-9 System Update ………………………9-11 T Traffic …………………………………5-36 Troubleshooting ……………… 5-36, 10-4 Turning the System On/Off …………… 1-9 Types of Commands ………………… 6-8 9-12 I Index U W USB ……………………………………2-22 USB Image ……………………………2-28 USB Music ……………………………2-25
Important Safety Information Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual ("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences. Keep User's Guide in Vehicle When kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Multimedia system.
Voice Command Control Functions within the Multimedia system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel. Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Warning "This device complies with Industry Canada licence-exempt RSS standard(s)." Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
MEMO
