Description Displayed when the SYNC key is pressed and the temperatures of the driver's seat and the passenger seats can be configured at the same time.
Camera Steering-linked camera • This device is connected to a rear WARNING - Backing Up & Using Camera • Never rely solely on the rear view camera when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supplement the rear view camera by looking over your shoulders and checking your rear view mirrors.
SVM (Surround View Monitor) Front SVM Rear SVM With the power on, the SVM is connected Select the to the SVM camera to see the front, rear, engine. key after starting the If the gear is positioned to R, the rear SVM camera is automatically switched to the and back of the car when driving at low If the gear is in a position other than P or operational mode. speeds (15km/h or less). It is optional.
Parking Guidance Settings Name Description isplay D Guidelines Guidelines are displayed in the Rear View Camera screen, as shown below. /R F Proximity Warnings Provides a warning when an object is in close proximity to the front or rear of the vehicle. ront View F Mode Displaying the front SVM, select the basic display mode of the camera screen. (SVM, Front left, Front right, and Front.) ear View R Mode Displaying the rear SVM, select the basic display mode of the camera screen.
part.
Setup Setup Navigation Settings Sound Settings Setup is the screen to control Audio sys- For more details, refer to part 5. Navigation Adjusts the sound effects for the whole tem settings. Settings. system. To enter the screen, press the key or the 9-2 I Setup Setup SETUP icon in All Menus. Features Description Position Select the Up/Down/Left/ Right button to control sound positioning. Select to concentrate the sound on the center of vehicle.
Description Priority Sets the volume ratio when reversing the car, turning on the car’s ignition, etc. avigation N Volume Sets the method of navigation guidance volume adjustment. Advanced Select additional audio options such as “Speed Dependent Volume Control” that automatically controls Audio volume according to vehicle speed. Beep Select to activate a beep when pressing buttons. i Information • A dvanced sound settings may differ according to selected AMP option.
Bluetooth Connection Press the ▶ Select SETUP key ▶ Select Bluetooth Connection . 9-4 I Setup Features Description Paired Device List Displays the paired Bluetooth device list. When selecting from the list, the device is connected or disconnected. luetooth B Audio Connection Status An icon appears when you make a Bluetooth Audio connection. luetooth B Hands-Free Connection Status An icon appears when you make a Bluetooth Hands-free connection. Add New Register a new Bluetooth device.
Auto Connection Priority Press the ▶ Select SETUP key ▶ Select Auto Connection Priority Bluetooth . Bluetooth System Information Press the ▶ Select SETUP key ▶ Select Bluetooth System Info UVO eServices Settings Bluetooth . Within the eServices Settings screen, UVO eServices related features can be set, such as activating 911 Connect, Parking Minder and setting the My Car Zone. For safety reasons, My Car Zone Settings cannot be adjusted while driving.
911 Connect Parking Minder My Car Zone This feature is used to turn on or off the If you want to send vehicle location to your This feature is used to set My Car Zone 911 Connect feature. smartphone automatically when you turn (Curfew Limit, Speed) alert conditions. the ignition off, turn the Parking Minder feature On. My Car Zone Settings is unavailable when UVO eServices has not been activated. Press the My Car Zone SETUP key ▶ UVO eServices ▶ .
This screen is used to set Curfew Limit Curfew Limit Alert Settings Geo Fence Alert Settings and Speed Alert features. Within Curfew Limit Alert Settings, you can Within Geo Fence Alert Settings, you can set the Curfew Limit Alert Start and End set entry-restricted areas. Press Add Geo Time. You can also set the Alert Interval of Fence and set the center point and radius alerts upon Curfew Limit. of the desired Geo Fence on the Map . screen.
PIN Press the This feature is used to change the PIN to PIN to your My UVO com account. enter My Car Zone Settings. Done button to transmit the new Restore Factory Settings This feature is used to restore all My Car Zone alert history and settings back to default state. NOTICE • B e fo r e p r e s s i n g Done , e n s u r e yo u r smartphone is connected to UVO eServices system via USB cable.
Scheduled Diagnostics Phone Projection Settings Trip Info Sync Reminder This feature is for setting when scheduled Trip Info is a feature used to set whether diagnostics alerts display. system displays alert when trip info(Driv- For more details, refer to Phone Projection ing Distance, Driving Speed, Driving Time, guide. Press SETUP key ▶ UVO eServices the Scheduled Diagnostics On ▶ ▶ Set Settings etc). reaches 90% of memory. . UVO eServices must be activated to use this feature.
Custom Button Settings You can choose the feature to be accessed when the key is pressed. Setting it to a feature that you frequently use will allow you to access the feature quickly and conveniently anytime. For example, setting it to My Menu will enable you to access the My Menu screen by pressing the key.
