Features of your vehicle How vehicle audio works This can be due to factors, such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridges or other large obstructions in the area. FM reception AM (MW, LW) reception ♬♩♪ ♬♩♪ ♬♩♪ JBM002 JBM001 AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle.
Features of your vehicle FM radio station ♬♩♪ JBM003 JBM004 JBM005 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio.
Features of your vehicle Using a cellular phone or a twoway radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment. CAUTION When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted.
Features of your vehicle • Depending on the type of CDR/CD-RW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, continued use may cause malfunctions to your audio system. NOTE: Order of playing files (folders) : 1. Song playing order : to sequentially. 2. Folder playing order : ❋ If no song file is contained in the folder, that folder is not displayed.
Features of your vehicle WARNING • Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents. • Do not disassemble, assemble, or modify the audio system. Such acts could result in accidents, fire, or electric shock. • Using the phone while driving may lead to a lack of attention of traffic conditions and increase the likelihood of accidents. Use the phone feature after parking the vehicle.
Features of your vehicle (Continued) • If you want to change the position of device installation, please inquire with your place of purchase or service maintenance center. Technical expertise is required to install or disassemble the device. • Turn on the car ignition before using this device. Do not operate the audio system for long periods of time with the ignition turned off as such operations may lead to battery discharge. • Do not subject the device to severe shock or impact.
Features of your vehicle ✽ NOTICE - USING THE USB DEVICE • To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. • If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) • If the engine is started up or turned off while the external USB device is connected, the external USB device may not work.
Features of your vehicle (Continued) • If you use devices such as a USB hub purchased separately, the vehicle’s audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia terminal of the vehicle. • If the USB device is divided by logical drives, only the music files on the highest-priority drive are recognized by car audio. • Devices such as MP3 Player/ Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable.
Features of your vehicle ✽ NOTICE - USING THE iPod® DEVICE • Some iPod models may not support communication protocol and files may not properly play. Supported iPod models: - iPhone 3GS/4 - iPod touch 1st~4th generation - iPod nano 1st~6th generation - iPod classic • The order of search or playback of songs in the iPod can be different from the order searched in the audio system. • If the iPod disabled due to its own malfunction, reset the iPod.
Features of your vehicle ■ CD Player (for RDS model) : ❋ No logo will be shown if the Bluetooth® Wireless Technology feature is not supported.
Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS Audio Head Unit (for RDS model) 2. RADIO • Changes to FM/AM mode. • Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟ AMA. ❈ In Setup>Display, the radio pop up screen will be displayed when [Mode Pop up] is turned On . When the pop up screen is displayed, use the TUNE knob or keys 1 ~ 6 to select the desired mode. 1. (EJECT) • Ejects the disc. 3. MEDIA • Changes to CD, USB(iPod), AUX, My Music, BT Audio mode.
Features of your vehicle 8. 1 ~ 6 (Preset) • Radio Mode: Saves frequencies (channels) or receives saved frequencies (channels) • CD, USB, iPod, My Music mode - 1 RPT : Repeat - 2 RDM : Random • In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. SEEK 6. TRACK • Radio Mode : Automatically searches for broadcast frequencies. • CD, USB, iPod, My Music modes - Shortly press the key (under 0.8 seconds): Moves to next or previous song (file) - Press and hold the key (over 0.
Features of your vehicle 13. TUNE knob • Radio mode : Changes frequency by turning the knob left/right • CD, USB, iPod, My Music mode: Searches .songs (files) by turning the knob left/right ❈ When the desired song is displayed, press the knob to play the song. • Moves focus in all selection menus and selects menus 15. FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ FM2 ➟ FMA. 16. AM • Changes to AM mode.
Features of your vehicle Audio Head Unit 1. (EJECT) • Ejects the disc. 2. RADIO • Changes to FM/AM mode. • Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ AM. ❈ In Setup>Display, the radio pop up screen will be displayed when [Mode Pop up] is turned On . When the pop up screen is displayed, use the TUNE knob or keys 1 ~ 6 to select the desired mode.
Features of your vehicle 8. 1 ~ 6 (Preset) • Radio Mode: Saves frequencies (channels) or receives saved frequencies (channels) • CD, USB, iPod, My Music mode - 1 RPT : Repeat - 2 RDM : Random • In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. SEEK 6. TRACK • Radio Mode : Automatically searches for broadcast frequencies. • CD, USB, iPod, My Music modes - Shortly press the key (under 0.8 seconds): Moves to next or previous song (file) - Press and hold the key (over 0.
Features of your vehicle 13. TUNE knob • Radio mode : Changes frequency by turning the knob left/right • CD, USB, iPod, My Music mode: Searches songs (files) by turning the knob left/right ❈ When the desired song is displayed, press the knob to play the song. • Moves focus in all selection menus and selects menus 15. FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ FM2. 16. AM • Changes to AM mode.
Features of your vehicle SETUP (for RDS model) Mode Pop up Sound Settings - On . [Mode Pop up] Changes selection mode • During On state, press the RADIO or MEDIA key to display the mode change pop up screen.
Features of your vehicle Audio Settings Virtual Sound This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and Balance. Select [Audio Settings] Select menu through TUNE knob Turn TUNE knob left/right to set The PoewrBass, PowerTreble, and Surround can be set. Select [Virtual Sound] Set menu through TUNE knob Set On / Off through TUNE knob • PowerBass : This is a sound system feature that provides live bass. • PowerTreble : This is a sound system feature that provides live tremble.
Features of your vehicle Phone Setup (Bluetooth® Wireless Technology equipped model) Press the SETUP key Select [Phone] through TUNE knob or 4 key Select menu through TUNE knob Pair Phone CAUTION To pair a Bluetooth® Wireless Technology enabled mobile phone, authentication and connection processes are first required. As a result, you cannot pair your mobile phone while driving the vehicle. First park your vehicle before use.
Features of your vehicle Phone List • Connecting a phone • Disconnecting a connected phone The names of up to 5 paired phones will be displayed. Select [Phone List] Select mobile phone through TUNE knob Select [Connect Phone] Select [Phone List] Select mobile phone through TUNE knob Select [Disconnect Phone] ➀ Select a mobile phone that is not currently connected. ➁ Connect the selected mobile phone. ➂ Connection completion is displayed. ➀ Select the currently connected mobile phone.
Features of your vehicle • Changing connection sequence (Priority) This is used to change the order (priority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority] through TUNE knob Select No. 1 Priority mobile phone ➀ Select [Priority]. ➁ From the paired phones, select the phone desired for No.1 priority. ➂ The changed priority sequence is displayed. ❈ Once the connection sequence (priority) is changed, the new no. 1 priority mobile phone will be connected.
Features of your vehicle Auto Download Outgoing Volume When connecting a mobile phone, it is possible to automatically download new phone book and Call Histories. Select [Auto Download] Set On / Off through TUNE knob This is used to set the volume of your voice as heard by the other party while on a Bluetooth® Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set volume through TUNE knob ❈ Even while on a call, the volume can be changed by using the SEEK key.
Features of your vehicle Using the Bluetooth® Wireless Technology System To use Bluetooth® Wireless Technology when the system is currently off, follow these next steps. • Turning On Bluetooth® Wireless Technology through the PHONE Key PHONE Press the key Screen Guidance ❈ Moves to the screen where Bluetooth® Wireless Technology functions can be used and displays guidance.
Features of your vehicle System Settings Press the SETUP key Select [System] through tune knob or 5 key Select menu through TUNE knob Memory Information (if equipped) Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is displayed on the left side while the total system memory is displayed on the right side. VRS Mode This feature is used to change voice command feedback between Normal and Expert modes.
Features of your vehicle Language This menu is used to set the display and voice recognition language. Select [Language] Set through TUNE knob SETUP Display Settings SETUP Press the key Select [Display] through TUNE knob or 1 RPT key Select menu through TUNE knob ❈ The system will reboot after the language is changed. ❈ Language support by region - Mode Pop up On . [Mode Pop up] Changes selection mode • During On state, press the RADIO or MEDIA key to display the mode change pop up screen.
Features of your vehicle SOUND SETTINGS SETUP Press the key Select [Sound] through TUNE knob or 2 RDM key Select menu through TUNE knob Sound Settings Virtual Sound This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and Balance. Select [Sound Settings] Select menu through TUNE knob Turn TUNE knob left/right to set The PoewrBass, PowerTreble, and Surround can be set.
Features of your vehicle Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.
Features of your vehicle Phone Setup (for Bluetooth® Wireless Technology equipped model) SETUP Press the key Select [Phone] through TUNE knob or 4 key Select menu through TUNE knob Pair Phone CAUTION To pair a Bluetooth® Wireless Technology enabled mobile phone, authentication and connection processes are first required. As a result, you cannot pair your mobile phone while driving the vehicle. First park your vehicle before use. ➂ Pairing completion is displayed.
Features of your vehicle Phone List The names of up to 5 paired phones will be displayed. A [ ] is displayed in front of the currently connected phone. Select the desired name to setup the selected phone. 4 220 • Connecting a phone Select [Phone List] Select mobile phone through TUNE knob Select [Connect Phone] ➀ Select a mobile phone that is not currently connected. ➁ Connect the selected mobile phone. ➂ Connection completion is displayed.
Features of your vehicle • Changing connection sequence (Priority) This is used to change the order (priority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority] through TUNE knob Select No. 1 Priority mobile phone ➀ Select [Priority]. ➁ From the paired phones, select the phone desired for No.1 priority. ➂ The changed priority sequence is displayed. ❈ Once the connection sequence (priority) is changed, the new no. 1 priority mobile phone will be connected.
Features of your vehicle Auto Download Outgoing Volume When connecting a mobile phone, it is possible to automatically download new Contacts and Call Histories. Select [Auto Download] Set On / Off through TUNE knob This is used to set the volume of your voice as heard by the other party while on a Bluetooth® Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set volume through TUNE knob ❈ Even while on a call, the volume can be changed by using the SEEK key.
Features of your vehicle Bluetooth® Wireless Technology System Off This feature is used when you do not wish to use the Bluetooth® Wireless Technology system. Select [Bluetooth System Off] Set through TUNE knob ❈ If a phone is already connected, disconnect the currently connected phone and turn the Bluetooth® Wireless Technology system off. Using the Bluetooth® Wireless Technology System Bluetooth® Wireless To use Technology when the system is currently off, follow these next steps.
Features of your vehicle SYSTEM SETTINGS SETUP Press the key Select [System] through tune knob or 5 key Select menu through TUNE knob Memory Information (if equipped) Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is displayed on the left side while the total system memory is displayed on the right side. Language This menu is used to set the display and voice recognition language.
Features of your vehicle RADIO (for RDS model) Adjust Volume Changing RADIO mode Turn the VOL knob left/right to adjust the volume. SEEK SEEK Press the RADIO key to change the mode in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟ AMA. Press the FM or AM key to change the mode in order of FM1 ➟ FM2 and AM. [Mode Pop up] On state : Displays the change radio mode pop up screen.
Features of your vehicle Selecting through manual search Turn the TUNE knob left/right to adjust the frequency. - FM : Changes by 50KHz - AM : Changes by 9khz AST (Auto Store) Region Press the MENU key Set [ AST] through TUNE knob or 1 RPT key. Press the MENU key Set [ Region] through TUNE knob or 3 key. The Region option can be turned On/Off. News Traffic Announcement (TA) Shortly pressing the TA/SCAN key (under 0.8 seconds): Set On / Off TA Traffic Announcement) mode.
Features of your vehicle RADIO Adjust Volume SCAN Changing RADIO mode Turn the VOL knob left/right to adjust the volume. Press the SCAN key • Shortly pressing the key (under 0.8 seconds): The broadcast frequency increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency. • Pressing and holding the key (over 0.8 seconds): Previews the broadcasts saved in Preset 1 ~ 6 for 5 seconds each.
Features of your vehicle Selecting through manual search Turn the TUNE knob left/right to adjust the frequency. • AM100GMGE / AM110GMGE MENU Within MENU key are the A.Store (Auto Store) and Info functions. - FM : Changes by 50KHz - AM : Changes by 9khz • AM100GMGG / AM110GMGG - FM : Changes by 100KHz - AM : Changes by 9khz • AM100GMGN / AM110GMGN - FM : Changes by 200KHz - AM : Changes by 10khz 4 228 A.Store (Auto Store) Press the MENU key Set [ A.Store] through TUNE knob or 1 RPT key. Select A.
Features of your vehicle BASIC METHOD OF USE : Audio CD / MP3 CD / USB / iPod / My Music Press the MEDIA key to change the mod mode in order of CD ➟ USB(iPod) ➟ AUX ➟ My Music ➟ BT Audio. The folder/file name is displayed on the screen. Repeat
Features of your vehicle Random Changing Song/File Scan (for RDS model) While song (file) is playing 2 RDM (RDM) key Audio CD, My Music mode: RDM on screen • Random (Shortly pressing the key (under 0.8 seconds)): Plays all songs in random order. MP3 CD, USB mode: FLD.RDM on screen • Folder Random (Shortly pressing the key (under 0.8 seconds)): Plays all files within the current folder in random order. iPod mode: ALB RDM on screen • Album Random (Shortly pressing the key (under 0.
Features of your vehicle MENU : Audio CD Folder Search : MP3 CD, USB Mode While FOLDER file is playing (Folder Up) PTY FOLDER / Press the CD MP3 mode to set the Repeat, Information features. Information key Random, MENU key Information features. • Searches the next folder. While file is playing / FOLDER (Folder Down) key PTY FOLDER • Searches the parent folder. ❈ If a folder is selected by pressing the TUNE knob, the first file within the selected folder will be played.
Features of your vehicle Folder Random All Random Copy (if equipped) Press the MENU key Set [ F.RDM] through the TUNE knob or 2 RDM key to randomly play songs within the current folder. h Press F.RDM again to turn off. Press the MENU key Set [ A.RDM] through the TUNE knob 4 or key to randomly play all songs within the CD. ❈ Press A.RDM again to turn off. Press the MENU key Set [ Copy] through the TUNE knob or 6 key. This is used to copy the current song into My Music.
Features of your vehicle MENU : iPod Album Random Information In iPod mode, press the MENU key to set the Repeat, Album Random, All Random, Information and Search features. Press the MENU key Set [ Alb.RDM] through the TUNE knob or 2 RDM key. Plays albums within the currently playing category in random order. ❈ Press Alb.RDM again to turn off. Press the MENU key Set [ Info] through the TUNE knob or 4 key. Displays information of the current song. ❈ Press the MENU key to turn off info display.
Features of your vehicle MENU : My Music Mode (if equipped) In My Music mode, press the MENU key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. Random Delete Press the MENU key Set [ RDM] through the TUNE knob or 2 RDM key. Plays all songs in random order. ❈ Press RDM again to turn random off. Press the MENU key Set [ Delete] through the TUNE knob or 4 key.
Features of your vehicle Delete All Press the MENU key Set [ Del.All] through the TUNE knob or 5 key. Deletes all songs of My Music. ➁ After selecting, press the MENU key and select the delete menu. Delete Selection Press the MENU key Set [ Del.Sel] through the TUNE knob or 6 key. Songs within My Music are selected and deleted. ➀ Select the songs you wish to delete from the list. ✽ NOTICE - USING THE My Music • Even if memory is available, a maximum of 6,000 songs can be stored.
Features of your vehicle Bluetooth® Wireless Technology AUDIO (if equipped) What is Bluetooth® Wireless Technology? Bluetooth® Wireless Technology is a wireless technology that allows multiple devices to be connected in a short range, low-powered devices like hands-free, stereo headset, wireless remote controller, etc. For more information, visit the Bluetooth® Wireless Technology website at www.Bluetooth.
Features of your vehicle PHONE (if equipped) Making a call using the Steering remote controller Before using the Bluetooth® Wireless Technology phone features • In order to use Bluetooth® Wireless Technology phone, you must first pair and connect the Bluetooth® Wireless Technology mobile phone. • If the mobile phone is not paired or connected, it is not possible to enter Phone mode. Once a phone is paired or connected, the guidance screen will be displayed.
Features of your vehicle Phone MENU (for RDS model) Phone Book Phone Setup Press the PHONE key to display three menus (Call History, Phone Book, Phone Setup). Press the PHONE key Set [ P. Book] through the TUNE knob or 2 RDM key. The phone book is displayed and can be used to select a number and make a call. ❈ If more than one number is saved to one contact, then a screen showing the mobile phone number, Home and office number is displayed. Select the desired number to make the call.
Features of your vehicle Phone MENU Press the PHONE key to display three menus (Call History, Contacts, Phone Setup). Call history Press the PHONE key Set [ History] through the TUNE knob or 1 RPT key. The call history is displayed and can be used to select a number and make a call. If call history does not exist, a screen asking whether to download call history is displayed.
Features of your vehicle ✽ NOTICE - USING THE • • • • • Bluetooth® Wireless Technology CELLULAR PHONE Do not use a cellular phone or perWireless form Bluetooth® Technology settings (e.g. pairing a phone) while driving. Wireless Some Bluetooth® Technology -enabled phones may not be recognized by the system or fully compatible with the system.
Features of your vehicle (Continued) • When a Bluetooth® Wireless Technology mobile phone is connected, a ( ) icon will appear at the top of the screen. If a ( ) icon is not displayed, this indicates that a Bluetooth® Wireless Technology enabled device has not been connected. You must connect the device before use. For more information on Bluetooth® Wireless Technology mobile phones, refer to the “Phone Setup” section.
Features of your vehicle ✽ NOTICE - USING VOICE COMMAND • The voice recognition feature of this product supports recognition of the commands listed within this user’s manual. • While using voice recognition, operating the steering remote control or the device will terminate voice recognition and allow you to manually operate desired functions. • Position the microphone above the head of the driver’s seat. For superior performance, maintain good posture when saying voice commands.
Features of your vehicle VOICE COMMAND (if equipped) Starting Voice Command • To start voice command, shortly press the key on the steering wheel remote controller. • If voice command is in [Normal Mode], then the system will say “Please say a command.
Features of your vehicle • End voice command. Shortly pressing the ❈ Illustration on using voice commands • Starting voice command. Shortly pressing the key (under 0.8 seconds): More Help More Help. You can say Radio, FM, AM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Phone book. Please say a command. • Skipping Voice Recognition Shortly pressing the key (under 0.8 seconds): while guidance message is being stated Shortly pressing the (under 0.
Features of your vehicle Voice Command List • Common Commands: These are commands that can be used in all situations. (However, some commands may not be supported in special circumstances.) Command More Help Help Function Provides guidance on commands that can be used anywhere in the system. Command FM Function • When currently listening to the FM radio, maintains the current state. • When listening to a different mode, displays Provides guidance on commands that can be used within the current mode.
Features of your vehicle Command Function Media Moves to the most recently played media screen. Play Track 1~30 If a music CD has been inserted, plays the corresponding track. CD Plays the music saved in the CD. Search CD Moves to the CD track or file selection screen. • For audio CDs, move to the screen and say the track number to play the corresponding track. • Moves to MP3 CD file selection screen. After manually operate the device to select and play music. USB Plays USB music.
Features of your vehicle • FM/AM radio commands: Commands that can be used while listening to FM, AM radio. Command Function • Audio CD commands: Commands that can be used while listening to Audio CD. Command Function Preset 1~6 Plays the broadcast saved in Preset 1~6. Region off Disable Region feature Auto Store Automatically selects radio broadcast frequencies with superior reception and saves in Presets 1~6. Program Type Moves to the RDS Program type selection screen.
Features of your vehicle • MP3 CD / USB commands: Commands that can be used while listening to music files saved in CD and USB. Command Random Function Randomly plays the files within the current folder. • iPod Commands: Commands that can be used while playing iPod. Command Function All Random Randomly plays all saved songs. Random Randomly plays the songs within the current category. All Random Randomly plays all saved files. Random Off Cancels random play to play files in sequential order.
Features of your vehicle • My Music Commands: Commands that can be used while playing My Music. Command Function • Bluetooth® Wireless Technology Audio Commands: Commands that can be used while playing Phone Music. Command Function Random Randomly plays all saved files. Play Plays the currently paused song. Random Off Cancels random play to play files in sequential order. Pause Pauses the current song. Repeat Repeats the current file.
Features of your vehicle APPENDIX Name AST (A.
Features of your vehicle ■ CD ❋No 4 252 Player (for RDS model) : logo will be shown if the Bluetooth® Wireless Technology feature is not supported.
Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS ❈ Display and settings may differ depending on the selected audio. Audio Head Unit (for RDS, Bluetooth® Wireless Technology equipped model) 1. (EJECT) • Ejects the disc. 2. RADIO • Converts to Radio(FM/AM) mode. • Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟ AMA. 3. MEDIA • Start Media mode • Each time the key is pressed, the mode is changed in order of CD, USB(iPod) AUX, My Music, BT Audio.
Features of your vehicle 10. SCAN • Radio Mode : previews all receivable broadcasts for 5 seconds each • Media (CD/USB/iPod/My Music) modes : previews each song (file) for 10 seconds each. 11. SETUP Converts to Setup mode. 8. • Turns the monitor display on/off. TA 9. • Set TA(Traffic Announcement) feature On/Off. 4 254 12. TUNE knob • Radio mode : turn to change broadcast frequencies. • Media (CD/USB/iPod/My Music) modes : turn to search tracks/channels/files. 14.
Features of your vehicle Audio Head Unit 15. FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ FM2 ➟ FMA. 17. MEDIA • Start Media mode • Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music. 18. MUTE Mutes audio volume. 16. AM • Changes to AM mode. • Each time the key is pressed, the mode changed in order of AM ➟ AMA.
Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS ❈ Display and settings may differ depending on the selected audio. Audio Head Unit (for Bluetooth® Wireless Technology equipped model) 1. (EJECT) • Ejects the disc. 2. RADIO • Converts to Radio(FM/AM) mode. • Each time the key is pressed,the mode is changed in order of FM1➟FM2➟AM. 3. MEDIA • Start Media mode • Each time the key is pressed, the mode is changed in order of CD, USB(iPod) AUX, My Music, BT Audio. 4.
Features of your vehicle 11. SETUP Converts to Setup mode. Audio Head Unit 12. TUNE knob • Radio mode : turn to change broadcast frequencies. • Media (CD/USB/iPod/My Music) modes : turn to search tracks/channels/files. 14. RESET • Forced system termination and system restart. 8. DISP • Turns the monitor display on/off. 9. MUTE Mutes audio volume. 10.
Features of your vehicle Steering remote controller 1. VOLUME • Used to control volume. 2. MUTE • Mutes audio volume. 3. SEEK • When pressed shortly (under 0.8 seconds) - Radio mode : searches broadcast frequencies saved to presets. - Media(CD/USB/iPod/My Music/BT Audio) modes : changes the track, file or chapter. • When pressed and held (over 0.
Features of your vehicle 6. • When pressed shortly (under 0.8 seconds) - When pressed in the phone screen, displays call history screen - When pressed in the dial screen, makes a call - When pressed in the incoming call screen, answers the call - When pressed during call waiting, switches to waiting call (Call Waiting) • When pressed and held (over 0.
Features of your vehicle Radio Mode (for RDS model) 1. Mode Display Displays currently operating mode Basic Mode Screen 2. Frequency Displays the current frequency 3. Preset Displays current preset number [1] ~ [6] Switching to Radio Mode Pressing the RADIO key will change the operating mode in order of FM1 ➟FM2➟FMA➟AM➟AMA. Pressing the FM or AM key to change the operating mode in order of FM1➟FM2➟FMA and AM➟ AMA. 4. Preset Display Displays saved presets 5.
Features of your vehicle Searching Radio Frequencies Using Seek SEEK TRACK Press the key to play the previous/next frequency. Using Radio Mode ✽ NOTICE Selecting/Saving Presets Press the 1 ~ 6 buttons to play the desired preset. While listening to a frequency you want to save as a preset, press and hold one of the [1] ~ [6] preset buttons (over 0.8 seconds) to save the current frequency to the selected preset. Using TUNE Turn the TUNE knob to select the desired frequency.
Features of your vehicle RDS Menu Press the button to set the AF (Alternative Frequency), Region and News features. Scan • Radio Mode - Press the key (under 0.8 seconds): Previews each broadcast for 5 seconds each • CD, USB, My Music mode - Press the key (under 0.8 seconds): Previews each song (file) for 10 seconds each ❈ Press the key again to continue listening to the current song (file). ✽ NOTICE ✽ NOTICE The RDS Menu is not supported within AM or AMA mode.
Features of your vehicle Program Type PTY Press the key to search FOLDER for the desired Program type. TA (Traffic Announcement) TA Press the key to turn the TA (Traffic Announcement) feature On/Off. Turn the TUNE knob left/right to search for the desired program type. Once you find the desired program type, press the TUNE knob.
Features of your vehicle RADIO MODE - 1. Mode Display Displays currently operating mode 2. Frequency Displays the current frequency Basic Mode Screen 3. Preset Displays current preset number [1] ~ [6] 4. Preset Display Displays preset buttons Switching to Radio Mode Pressing the RADIO key will change the operating mode in order of FM1 ➟FM2➟AM Press the FM or AM key to change the mode in order of FM1➟ FM2 and AM.
Features of your vehicle Searching Radio Frequencies Using Radio Mode Using Seek SEEK TRACK Press the key to play the previous/next frequency. Selecting /Saving Presets Press the Preset button to display the broadcast information for the frequency saved to each button. Using TUNE Turn the TUNE knob to select the desired frequency. • FM : Increases/decreased by 100kHz • AM : Increases/decreased by 9kHz Auto Store Press the A.store button to automatically save receivable frequencies to Preset buttons.
Features of your vehicle ✽ NOTICE - USING THE DISCS • This device has been manufactured to be compatible with software bearing the following logo marks. • Do not clean discs with chemical solutions, such as record sprays, antistatic sprays, antistatic liquids, benzene, or thinners. • After using a disc, put the disc back in its original case to prevent disc scratches. • Hold discs by their edges or within the center hole to prevent damages to disc surfaces.
Features of your vehicle MP3 File Information • Support for Compressed Files 1. Supported Bitrates (Kbps) File System Audio Compression ISO 9660 Level 1 ISO 9660 Level 2 Romeo / Juliet (128 characters) MPEG1 Audio Layer3 MPEG2 Audio Layer3 MPEG2.5 Audio Layer3 Windows Media Audio Ver 7.X & 8.X ❈ File formats that do not comply with the above formats may not be properly recognized or play without properly displaying file names or other information.
Features of your vehicle • Language Support (Unicode Support) 1. English: 94 characters 2. Special characters and Symbols : 986 characters ❈ Languages other than Korean and English (including Chinese) are not included. 3. Text Display (Based on Unicode) - File name: Maximum 64 English characters - Folder name: Max 32 English characters ❈ Using the scroll feature allows you to see the entire name of files with names that are too long to be displayed at once.
Features of your vehicle 5. Prolonged use of CD-R/CD-RW discs that do not satisfy related standards and/or specifications could result in product malfunction.
Features of your vehicle MEDIA MODE MEDIA MODE ✽ NOTICE - - The media mode pop up screen can be displayed only when there are two or more media modes turned on. Switching to Media Mode Switching to Media Mode (for Bluetooth® Wireless Technology equipped model) Pressing the MEDIA key will change the operating mode in order of CD ➟ USB (iPod) ➟ AUX ➟ My Music ➟ BT Audio. Pressing the MEDIA key will change the operating mode in order of CD➟USB(iPod)➟AUX➟My Music.
Features of your vehicle AUDIO CD MODE 1. Mode Displays currently operating mode Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. Track Info Displays information about the current track 7. Random(Shuffle) Turns the Random(Shuffle) feature on/off 8. Repeat Turns the Repeat feature on/off 9. List Moves to the list screen 4. Play/Pause Changes the play/pause state 5. Play Time Displays the current play time 6.
Features of your vehicle Using Audio CD Mode ✽ NOTICE Playing/Pausing CD Tracks Once an audio CD is inserted, the mode will automatically start and begin playing. • Only genuine audio CDs are supported. Other discs may result in recognition failure (e.g. copy CDR, CDs with labels) • The artist and title information are displayed on the screen if track information is included within the audio CD. While playing, press the to pause and press play.
Features of your vehicle Selecting from the List Turn the TUNE knob left/right to search for the desired track. Rewinding / Fast-forwarding Tracks While playing, press and hold the SEEK key (over 0.8 seconds) to TRACK rewind or fast-forward the current track. Audio CD Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat and List features. Scan Press the SCAN key to play the first 10 seconds of each file.
Features of your vehicle Info Press the ( Info )button to display details about the current disc. List Press the ( List )button to display the track list screen. Random(Shuffle) Press the ( Shuffle )button to play tracks in random(Shuffle) order. Press the button again to turn the Random(Shuffle) feature off. • Random(Shuffle): Plays all tracks in random(Shuffle) order. Repeat Press the ( Repeat )button to repeat the current track. Press the button again to turn the repeat feature off.
Features of your vehicle MP3 CD MODE 1. Mode Displays currently operating mode. Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. File Index Displays the current file number 4. File Info Displays information about the current file 8. Random(Shuffle) Turns the Random(Shuffle) feature on/off 9. Repeat Turns the Repeat feature on/off 10. Copy Copies the current file into My Music 11. List Moves to the list screen 5.
Features of your vehicle Using MP3 CD Mode ✽ NOTICE Playing/Pausing MP3 Files Once an MP3 disc is inserted the mode will automatically start and being playing. If there are numerous files and folders within the disc, reading time could take more than 10 seconds and the list may not be displayed or song searches may not operate. Once loading is complete, try again. Selecting from the List Turn the TUNE knob left/right to search for the desired file.
Features of your vehicle Scan Press the SCAN key to play the first 10 seconds of each file. MP3 CD Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat, Copy and List features. Info Press the ( Info )button to display details about the current file. ✽ NOTICE Searching Folders PTY Press the FOLDER ( FOLDER ) key to select and search folders. Once the desired folder is displayed, press the TUNE knob to select.
Features of your vehicle Random(Shuffle) Press the ( Shuffle )button to play files in random(Shuffle) order. Each time the button is pressed, the feature changes in order of Random (Shuffle) Folder ➟ Random (Shuffle) All➟ Off. • Random(Shuffle) Folder : Plays all files within the current folder in Random (Shuffle) order. • Random(Shuffle) All : Plays all files in Random(Shuffle) order. Repeat Press the ( Repeat )button to repeat the current file or folder.
Features of your vehicle ✽ NOTICE - USING THE USB DEVICE • Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.The USB device may not operate properly if the car ignition is turned on or off with the USB device connected. • Heed caution to static electricity when connecting/disconnecting USB devices. • Encoded MP3 Players will not be recognized when connected as an external device.
Features of your vehicle (Continued) • Charging through the USB may not work for some mobile devices. • The device may not support normal operation when using a USB memory type besides (Metal Cover Type) USB Memory. • The device may not support normal operation when using formats such as HDD Type, CF, or SD Memory. • The device will not support files locked by DRM (Digital Rights Management.) • USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized.
Features of your vehicle USB MODE 1. Mode Displays currently operating mode Basic Mode Screen 7. Info Displays detailed information for the current file 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 8. Random(Shuffle) Turns the Random(Shuffle) feature on/off 3. File Index Displays the current file number 9. Repeat Turns the Repeat feature on/off 4. File Info Displays information about the current file 10.
Features of your vehicle ✽ NOTICE Using USB Mode Playing/Pausing USB Files Once a USB is connected, the mode will automatically start and begin playing a USB file. While playing, press the to pause and press play. 4 282 button button to • Loading may require additional time if there are many files and folders within the USB and result in faulty list display or file searching. Normal operations will resume once loading is complete.
Features of your vehicle Selecting from the List Turn the TUNE knob left/right to search for the desired file. Rewinding / Fast-forwarding Files While playing, press and hold the SEEK key (over 0.8 seconds) to TRACK rewind or fast-forward the current file. Searching Folders PTY Press the ( FOLDER FOLDER to select and search folders. )key Scan Press the SCAN key to play the first 10 seconds of each file. Once you find the desired file, press the TUNE knob to start playing.
Features of your vehicle USB Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat, Copy and List features. Info Press the ( Info )button to display details about the current file. ✽ NOTICE 4 284 • When the ‘Folder File’ option is set as the default display within Display setup, the album/artist/file information are displayed as detailed file information.
Features of your vehicle Copying Files Press the ( Copy )button to copy the current file into My Music. List Press the ( List )button to display the file list screen. ✽ NOTICE Selecting another feature during copying will display a pop-up asking whether you wish to cancel copying. To cancel, select 'Yes’. Turn the TUNE knob left/right to search for files. Once the desired file is displayed, press the knob to select and play.
Features of your vehicle ✽ NOTICE - USING THE iPod® DEVICE • iPod® is a registered trademark of Apple Inc. • In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/iPhone products) • If the iPod is connected to the vehicle while it is playing, a high pitch sound could occur for approximately 1-2 seconds immediately after connecting. If possible, connect the iPod to the vehicle with the iPod stopped/paused.
Features of your vehicle iPod MODE 1. Mode Displays currently operating mode Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle), displays the currently operating function 3. Song Index Displays the current song/total number of songs 7. Random(Shuffle) Turns the Random(Shuffle) feature on/off 8. Repeat Turns the Repeat feature on/off 9. List Moves to the list screen 4. Song Info Displays information about the current song 5. Play/Pause Changes the play/pause state 6.
Features of your vehicle ✽ NOTICE Using iPod Mode Playing/Pausing iPod Songs Once an iPod is connected, the mode will automatically start and begin playing an iPod song. While playing, press the to pause and press play. 4 288 button button to iPods with unsupported communication protocols may not properly operate in the audio system. Changing Songs SEEK Press the key to move to TRACK the previous or next song.
Features of your vehicle Searching Categories Turn the TUNE knob left/right to search for the desired category. ✽ NOTICE Category Menu There are eight categories that can be searched, including Playlists, Artists, Albums, Genres, Songs, Composers, Audiobooks and Podcasts. Within the iPod Category menu, you will have access to the , Home, and features. Once you find the desired category, press the TUNE knob to select and play. 1. : Displays the play screen 2.
Features of your vehicle ✽ NOTICE iPod Mode Menu • If the search mode is accessed while playing a song, the most recently searched category is displayed. • Search steps upon initial connection may differ depending on the type of iPod device. Within this mode, you will have access to the Random(Shuffle), Repeat and List features. Random(Shuffle) Press the ( Shuffle )button to play songs in random(Shuffle) order.
Features of your vehicle List Press the ( List )button to display the Category Menu. ✽ NOTICE AUX MODE Using AUX Mode Press the MEDIA key Select [AUX] An external device can be connected to play music. Connecting an External Device Turn the TUNE knob left/right to search for the desired category. Once you find the desired category, press the TUNE knob to select and play. External audio players (Camcorders, car VCR, etc.) can be played through a dedicated cable.
Features of your vehicle MY MUSIC MODE 1. Mode Displays currently operating mode Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. File Index Displays the current file/total number of files 4. File Info Displays information about the current file 5. Play/Pause Changes the play/pause state 6. Play Time Displays the current play time 4 292 7. Info Displays detailed information for the current file 8.