Users Manual Part 1

2-7
AA
Available settings may dier depending on the vehicle model
and specications.
AA
The rear view screen remains active even if you shift to any
position other than "R" (Reverse) after reversing. However,
the parking guides do not appear on the screen. When you
shift to "P" (Park) or drive at a predetermined speed or faster,
the rear view screen will be deactivated and the system will
display the previous screen automatically.
AA
You can change the settings for the rear camera after
touching Setup
>
Advanced
>
Extend Rear Camera Use on
the All Menus screen (if equipped).
AA
Noting the parking assist guide lines based on the steering,
you can see the moving direction.
AA
A warning sound is heard when the vehicle approaches
obstacles while parking. When you set to automatically lower
the audio volume while parking, it can prevent accidents
caused by failure to hear the warning sound. On the All
Menus screen, touch Setup
>
Sound
>
Priority
>
Proximity
Warning.
a
Moving direction lines (yellow)
Displays the vehicle’s moving direction based on the
steering angle.
b
Neutral steering lines (blue)
Displays the moving direction if you reverse the vehicle in
neutral. Noting these lines, you can determine whether
the vehicle is stopped in correct direction and the
distances to the neighboring vehicles are adequate.
c
Collision warning lines (red)
Used to prevent collision.
d
Rear top view button
Touch the button to display the rear top view.
e
Parking distance warning (if equipped)
Depending on the distance to obstacles, the warning
color and alert sound change along with the level (1/2/3)
to notify of the distance.
f
Camera image adjustment
Used to adjust the brightness and contrast of camera
images.
g
Center
Used to initialize the brightness and contrast of camera
images.