CAR MULTIMEDIA SYSTEM USER'S MANUAL H9EGH01 (영어 | 일반 멕시코) 디오디오2
Thank you for purchasing this multimedia system. Precaution for safe usage • This user's manual explains how to use the Kia Motor multimedia system. Before using the product, read the contents of this user's manual carefully and use this product safely. • • • The screens shown in this manual may differ with the actual screens of the product. The design and specification of this product may change without prior notification for product improvement.
Read the following safety precautions for your safety Before using the product, read the contents of this user's manual carefully and use this product safely. Notations used within this User's Manual WARNING • Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle.
iPod ® iPod® is a registered trademark of Apple Inc. ® Bluetooth Wireless Technology The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth ® Wireless Technology enabled cell phone is required to use Bluetooth ® Wireless Technology. Bluetooth ® Wireless Technology phone compatibility can be checked by visiting https://www.kia.
part.
Basic Safety Warnings • Please refrain from use if the screen • Some functions other than the one is blank or no sound can be heard as mentioned above cannot be used while • Do not stare at the screen while driving. these signs may indicate product mal- driving. These functions operate only Staring at the screen for prolonged peri- function. Continued use in such con- when the vehicle is parked. ods of time could lead to traffic accidents.
Safety Cautions • Pay attention to the volume setting when • Do not subject the device to severe turning the device on. A sudden output shock or impact. Direct pressure onto Pay attention to traffic conditions while of extreme volume upon turning the the front side of the monitor may cause driving. device on could lead to hearing impair- • Operating the device while driving could ment.
Key Product Features This device is a Multimedia system equipped with a multifunctional player that supports Radio (FM, AM), USB, iPod, AUX and Bluetooth Audio features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment. Display Wide TFT-LCD Display • Provides high quality video through a Wide TFTLCD Display using an LED Back Light. • Touch screen for maximum user convenience.
Component Names and Functions Name RADIO Name Description Converts to FM/AM mode • Each time the key is pressed, the mode is changed in the following order: FM → AM → FM. MEDIA Moves to MEDIA mode. • If the media is not connected MEDIA mode will not be activated. SEEK TRACK When the key is pressed shortly (for less than 0.8 seconds), • FM/AM mode: Plays the previous/next frequency. • MEDIA (USB/iPod) mode: Changes the track, file or title (except for AUX).
Steering Wheel Control Description For more details, refer to Phone Projection guide. MODE VOL + VOL - • Each time this key is pressed, mode is changed in the following order: FM → AM → USB or iPod → AUX → Bluetooth Audio → FM • If the media is not connected, the corresponding modes will be disabled • Press and hold the key (more than 0.8 seconds) to turn the Audio system on/off • When power is off, press the key to turn power back on Controls the volume When keys are pressed quickly. (less than 0.
Starting the System for the First Time Turning the System On/Off NOTICE • Cannot operate the system while it is booting up. It may take some time for all of features of the system. Press the engine start button or set the Pressing and holding the power key on the ignition key to On or ACC. Each time you head unit will turn off the system. turn on the system, a boot logo and safety You can change Screen Saver Settings warning will appear.
Battery Warning Message Always use the system while the car Restrictions on Features for Safety Measures engine is running. If you turn on the sys- Several features are limited while driving. tem while the engine is off, a battery warn- The restriction screen will disappear when ing message will appear. When the engine shifting gears into P or putting the parking starts, the message will disappear. brake on.
Home Screen Information Display on the Status Bar Controls Menu Configuration for the Home Screen Displays the date and time, along with the system status shown by Tap the the various icons to the right of the clock. icon on any screen to display the Home Screen below. The icons in the following table indicate the various types of system status details and events. Icon Description Displayed when the audio is muted. Displays the remaining battery of the Bluetooth phone.
Adding a Feature to My Menu Select My Menu on the Home Screen to add the most frequently used menus, On-Screen Touch Controls Drag & Drop Learn how to touch the screen to operate Select a menu or item you want, then drag the system. and drop it to where you want to place it. change the menu order, or delete menus. Select Tap lightly on a menu or an item to select it. NOTICE i Information • Up to 24 menus can be added to My Menu.
Flick (Quick Scrolling) Press and Hold Pressing the and buttons in the music player will fast forward/rewind the music. Quickly moves up and down in the list. NOTICE 01 • Moving the list when there are many items will display a handler on the right of the display. You can easily move many items at a time with the handler.
MEMO
part.
Radio/Media FM/AM You can access the radio player either by pressing the Features Displays the current operating mode. Preset Frequencies • The stored preset frequencies are displayed for user selection. • After selecting frequency, press and hold the preset button for over 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. • Flick the preset frequencies up/down to scroll quickly through presets. Frequency Displays the current frequency.
Description SEEK/TRACK • Pressing this button briefly (less than 0.8 seconds): Seeks the previous/next frequency. • Pressing and holding this button (for more than 0.8 seconds): Moves quickly through all of the frequencies. The moment that you release the button, the system seeks the next available frequency. TUNE TUNE knob to manually seek availTurn the able frequencies.
USB • Some USB devices may not be supported due to compatibility issues. Before Playing a USB MP3 • Take caution so that the USB connector does not come in contact with body parts or objects. Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the • Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction. ignition is turned on.
• The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected Plug Type Connector with the device. • Charging through the USB may not work for some mobile Product Name devices. • The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory.
Supported USB MP3 music specifications Name MP3 File Specification Recommended Bit Rates and Sampling Frequency Description Specification: MPEG1 AUDIO LAYER 3 Acceptable sampling frequency: 32, 44.1, 48 (kHz) Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps) 96, 128, 192 Kbps fixed bit rate/44.1kHz ID3 Tag Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.
Features Features Previous File Play/Pause Plays/pauses the current file Next File • If button is pressed (less than 0.8 seconds): Moves to the next file • If button is pressed (more than 0.
Features 2-8 I Radio/Media Description Menu • Delete Current File: A selected file can be deleted. Deleted file can be found in the to_ Delete folder. This function is only suppored when USB format is compatable with FAT16 or FAT32. • Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. TUNE TUNE knob to search a desired track. Turn the If the desired track is displayed, press the TUNE knob to play the track.
Features Description Displays folder/category name in the list Current Song Displays current playing file name Back Button Converts to basic mode screen Upper Folder/ Category Moves to Upper Folder Menu Now Playing: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file) Search Menu Search tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album.
iPod Using iPod Devices • iPod is a registered trademark of Apple Inc. • iPod mode will not operate if the connected iPod cannot be recognized due • If repeatedly connect and disconnect • To listen to the iPod sound, reconnect iPod/iPhone to the Multimedia system the USB cable or change the audio out- with USB cable in short time, it may put settings in iPod/iPhone to Dock. cause abnormal operation.
• When connecting with the iPod cable, • In Apple’s iOS 6.0 version or later, make sure to fully insert the jack to pre- Podcast and Audiobook media files are vent communication interference. If the designed to be played with the Podcasts iPod is connected to the vehicle while it and iBooks applications specifically is playing, a high pitch tone may sound designed for Apple products. If the Apple for about 1~2 seconds immediately after device does not provide the Podcast and connection.
Caution • If you control pause, repeat, shuffle, or • We recommend that your Apple device seek songs when the play time is when uses the latest firmware since some • While using a connected iPhone/iPod the play time is less than 3s before fin- problems may occur due to an outdated Touch device, it may not operate nor- ished playing, it may occur difference of firmware or other software related issues. mally if the user changed some func- playing song between the Multimedia tions in the device.
Caution • If connect to the Multimedia system while podcast or iTunes music down- • If the iPhone/iPod Touch supports loading to iPod/iPhone, it may occur Bluetooth, it is unable to use Bluetooth some problems when you select song Audio if the Apple device that is con- in the list. Reconnect iPod/iPhone to the nected to the Multimedia system Multimedia system when downloading through both USB connection and is finished or the file deleted. Bluetooth.
iPod Mode Display Controls Features Description Mode Displays current operating mode Song Index Shows the current song/total songs Repeat/Shuffle From Repeat/Shuffle, displays the current operating function Play Time Displays the current play time/total play time Song Info Displays the artist/song title/album info List Moves to the list screen 2-14 I Radio/Media Features Description Previous File If button is pressed (less than 0.
TUNE Description TUNE knob to search a desired Turn the track. If the desired track is displayed, press the TUNE knob to play the track. TUNE knob is not pressed within If the 5 seconds of searching tracks, the track info for the current track is restored.
Features 2-16 I Radio/Media Description Category Name Displays the category name Category List Displays the contents of selected category If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly. Back Button Converts to basic mode screen Upper Folder Moves to Upper Folder Search Menu Search tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook.
AUX Connecting an External Device If an external device connector is connected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored. NOTICE • If only a cable is connected to the AUX without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack.
Bluetooth® Audio Features Bluetooth Audio Mode Display Controls Features Description Mode Displays the current operating mode Phone Name Displays name of connected phone Description Artist Info Name of current artist Title Name of current song Previous File • If play time is less than 3 seconds, moves to the previous file • If play time is over than 3 seconds, plays the current file from the beginning This function may differ depending on the model of mobile phone Play/Pause Plays/Pauses Bl
Bluetooth Connection Settings Settings for pairing, connection and disconnection of a Bluetooth device. • In Bluetooth Audio play screen, select Menu and then Connections . i Information 02 • If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones.
MEMO
part.
Bluetooth Before Using the Bluetooth® Handsfree ® • The Bluetooth Handsfree feature may not be supported in some mobile phones. ® What is Bluetooth Wireless Technology? Precautions for Safe Driving ® • Bluetooth is a feature that enables drivers to practice safe driving. Connecting ® the head unit with a Bluetooth phone allows the user to conveniently make ® • Bluetooth Wireless Technology refers calls, receive calls, and manage the ® to a short-distance wireless networking phonebook.
CAUTIONS upon Connecting Bluetooth® Phone • If you do not want automatic connection • Before connecting the head unit with Bluetooth feature off of the Bluetooth ® with your Bluetooth device, turn the the mobile phone, check to see that the ® mobile phone supports Bluetooth fea- ® ® may differ depending on the mobile phone. ® • Pairing Bluetooth devices and use of ® device. other Bluetooth features are not sup- • Park the vehicle when connecting the head unit with the mobile phone. tures.
Bluetooth Connection Pairing a New Device Connecting Bluetooth Devices Pairing a New Device Through the Phone Settings Select SETUP key. ▶ Select Bluetooth Connects the Bluetooth devices that you .▶ add. . ▶ Select Before you can use the Bluetooth feature, Select you must first pair/connect your mobile . ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Connecting Devices by Selecting Phone/Call Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.
key. ▶ Select Bluetooth . ▶ Select Bluetooth Connection . ▶ Select the name of the device to connect. ▶ Connect Select SETUP Bluetooth. Disconnecting Bluetooth Devices Deleting Bluetooth Devices Deletes the Bluetooth devices that you Disconnects Bluetooth devices that are added. Note that deleting a Bluetooth connected. device will delete all Call History and Contact Info downloaded along with it. key. ▶ Select Bluetooth . ▶ .
Bluetooth Phone Phone Status Icons Shows the current phone status in the right top of the display. Icons Description You can use Bluetooth phones when a Bluetooth Hands-free connection is established. You can use Bluetooth audio features when a Bluetooth audio connection is established. You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.
Name Description Keypad Use the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone Call Makes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again. Dials a call after the Bluetooth devices are connected. • Select PHONE key or the steering wheel control.
Using the Menu During a Phone Call When making a call, you can use the following menu items. 3-8 I Bluetooth Name Description Use Private Switches a voice call from the car Hands-free to the mobile phone. End Ends a call. Contacts Displays the Contacts list. Outgoing Volume Displays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5). Keypad Moves to a screen for entering ARS numbers. Switch Switches to a call on hold, if any.
i Information Select PHONE Name key, and then Call History . Description All Lists the all call history. Dialed Lists the calls that you made. Received Lists the calls that you have received. Missed Lists the calls you missed. Call History Displays all of your call history. Select from the list to dial the number. Download Downloads the call history information from your mobile phone. • In some mobile phones, call records may not be added to your Call History.
i Information Contacts Select PHONE key, and then Name Contacts . Description Contacts List The list of Contacts. Select from the list to dial the number. Download Downloads contacts from your mobile phone. Search Searches Contacts. 3-10 I Bluetooth • U p t o 5 0 0 0 p h o n e nu m b e r s c a n b e downloaded from a single, paired Bluetooth device. • You cannot edit or delete downloaded phone numbers from your car. • Contacts can be viewed only when the Bluetooth device is connected.
Favorites PHONE key, and then Favorites . Name Description Favorites Lists the phone numbers saved as Favorites. Select from the list to dial the number. Add New Adds a new number to Favorites. Delete Deletes numbers that you select from Favorites.
MEMO
part.
Other Features Siri Eyes Free How to start Siri How to use Siri When you access the Siri screen while pressing and holding key on the Speak If you want to use Siri, you have to con- steering wheel, you can press nect your iOS device to Multimedia system ton and then you can speak what you but- through Bluetooth. want. Please see the Multimedia system (Please check whether your iOS device only supports “Phone” related functions.
Camera Steering-linked camera • This device is connected to a rear - Backing Up & Using Camera • Never rely solely on the rear view camera when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supplement the rear view camera by looking over your shoulders and checking your rear view mirrors.
MEMO
part.
Setup Setup Setup is the screen to control Audio system settings. To enter the screen, select the key or the Setup SETUP icon in All Menus. Features Sound Display Provides the Mode/ Illumination settings. Bluetooth Provides the Bluetooth Connection/Auto Connection Priority/ Bluetooth System Information settings. Phone Projection For more details, refer to Phone Projection guide. Custom Button Provides settings that configure the feature to be accessed when the key is pressed.
Features Priority Advanced Select additional audio options such as “Speed Dependent Volume Control” that automatically controls Audio volume according to vehicle speed. Default Resets the sound to factory default settings. Beep Select to activate a beep when pressing buttons. Adjusts the sound effects for the whole system. Features Description Position Select the Up/Down/Left/ Right button to control sound positioning. Press Center to concentrate the sound on the center of vehicle.
Bluetooth Settings Bluetooth Connection Settings Select the ▶ Select Changes Bluetooth phone settings. SETUP key ▶ Select Bluetooth Connection . Features Paired Device List Bluetooth Audio Connection Status An icon appears when you make a Bluetooth Audio connection. Bluetooth Hands-Free Connection Status An icon appears when you make a Bluetooth Hands-free connection. Add New Register a new Bluetooth device. Delete Devices Select and delete a paired device.
Auto Connection Priority Select the ▶ Select SETUP key ▶ Select Auto Connection Priority Bluetooth . When the engine is running, the selected Bluetooth device is automatically connected. If you fail to connect the selected Bluetooth System Information Select the ▶ Select SETUP Bluetooth . Features Description Vehicle Name You can change the Bluetooth device name of the vehicle. Passkey You can change the passkey used for Bluetooth device authentication. the initial passkey is 0000.
Custom Button Settings Home Screen Settings Date/Time Settings You can configure the feature to be accessed when the key is pressed. You can customize the three menu items Configure the settings for time and date. at the bottom right of the Home Screen Using the arrow buttons, you can change into the ones you want. the values. Clock settings do not automatically change when crossing into different On the Home Screen Settings screen, time zones.
Language Settings Keyboard Settings Screen Saver Settings You can configure the displayed system You can configure the keyboard layout for You can select any of the following screen language. each language. formats to be displayed when the screen or power is turned off (Press and hold the Power button). • Digital clock and date • Analog clock and date • None When the language is changed, the sys- You can configure ABCD or QWERTY tem language is automatically changed. keyboards for the system.
Advanced Settings System Info You can configure notifications per feature, System version information and update etc. details are available. System Update At the System Info screen, insert the USB memory with the latest file downloaded, and then select the Update button to begin updating. The system will then reboot automatically.
part.
Appendix Product Specification Common Name Car TFT LCD Display Audio Unit Power Supply DC 14.4 V Operating Power DC 9 V ~ DC 16 V TFT-LCD Screen Size 7 inch(152.4 X 91.44 mm) Resolution 384000 pixels (Resolution: 800 x 480) Operating Method Current Consumption 2.
Bluetooth ® Wireless Technology Supported Bluetooth® Specification Frequency Range 2402 ~ 2480 MHz Supported Profile Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0) Output -6~4 dBm (Power Class2, Conducted) Number of Channels 79 channels 3.0 CAUTION 06 • The producer and installer cannot provide services related to life safety as the concerned radio equipment is liable to radio interference.
Troubleshooting 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.
The power does not turn on The system does not play Possible Cause The fuse is disconnected Countermeasure Problem Possible Cause Countermeasure • Replace with a suitable fuse • If the fuse is disconnected again, please contact your point of purchase or Kia dealer The image color/tone quality is low • The brightness, saturation, hue, and contrast levels are not set properly • Properly adjust the brightness, saturation, hue, and contrast levels through Display Setup • The volume level is set to t
Problem The USB does not work 6-6 I Appendix Possible Cause Countermeasure • USB memory is damaged • Please use the USB after formatting it.
FAQ About Pairing Mobile Phones Q What is a Passkey? Q I cannot pair my mobile phone. What is the cause? ® A Check to see that the mobile phone supports Bluetooth func- A A passkey is the password used to authenticate the connection tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set between the head unit and mobile phone. The passkey only it to ON.
About Bluetooth ® Wireless Technology/ Head Unit Use Environment About Making/Answering Phone Calls Q How can I answer a call? A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, press the Accept button on the screen or the To reject the call, press the A The wireless connection can be used within 15 yards. key on the steering wheel control.
Important Safety Information Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual (“User’s Guide”). Not following precautions found in this User’s Guide can lead to an accident or other serious consequences. Keep User’s Guide in Vehicle When kept in the vehicle, the User’s Guide will be a ready reference for you and other users unfamiliar with the Multimedia system.
Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. Volume Setting Do not raise the volume excessively.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Warning “This device complies with Industry Canada licence-exempt RSS standard(s).” Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with minimum 20 cm between the radiator and your body.
