FCC ID: TQ8-BA010XMa / IC: 5074A-BA010XMa ATTACHMENT E. - User Manual - HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
User’s Guide Kia UVO Audio System Model : BA010XMa
TABLE OF CONTENTS RECOMMENDATION WELCOME WARNING & SAFETY INFORMATION Safety symbols FCC Information FCC notification to users Canadian Compliance Safety Precautions COPYRIGHTS & TRADEMARKS PART I. GETTING STARTED 1. Main Features 2. Controls and Features 1. Head unit 2. Steering wheel 3. Basic Features 1. System Power Turning System Power On Turning System Power Off 2. Turn Display On and Off 3. Select Display Language 4.
Scanning FM/AM broadcast frequencies Preset Scan Viewing FM/AM station information Listening to HD radio 2. SIRIUS MODE SIRIUS Mode Screen and Features Listening to the SIRIUS radio Selecting a SIRIUS channel Selecting through SEEK Selecting through manual search Selecting through preset Selecting through channel search Selecting through SIRIUS category list Using Skip Storing preset Viewing SIRIUS channel information Updating SIRIUS (Firmware, channel, subscription) 3.
3. USB MODE Cautions upon handling USB MP3 Precautions upon handling USB Connecting your USB device USB Mode Screen and Features Listening to music songs Selecting a music songs Selecting through song up/down Selecting through manual search Selecting from the playlist by Folder, Artist, Albums, Genres, Songs, Composers Viewing song information Copying songs into My Music Copying the current song Copying songs from list 4.
Selecting a Virtual CD Listening to all Virtual CDs My Music Mode Listening to My Music Selecting My Music Selecting from a playlist Selecting through song up/down Selecting through manual search Selecting through the playlist by Artist, Albums, Genres, Songs, Composers, REW/FF a song Using Jump Using Repeat Using Shuffle Adding Favorites Playing Favorites Memory Management Checking System Information Deleting Virtual CDs and My Music deleting Virtual CDs deleting My Music deleting all files PART III.
Transferring the handsfree call to your Handset device Transferring a call on your Handset device to handsfree 5. Phone Settings Setting Phone Volume Turn Streaming Audio On and Off Contacts Sync SMS Sync Changing passkey PART IV. VOICE COMMANDS 1. 2. 3. 4. 5.
RECOMMENDATION Please read this manual to get the full benefit of the system. These operating instructions are designed to ensure that you can operate the Kia UVO Audio System in a safe and convenient way. We recommend that this manual be kept in the car. That way, it will be easier for you to find information in case of an emergency.
WELCOME Congratulations on the Purchase of your new Kia UVO Audio System! Your new Kia UVO Audio System allows you to enjoy various audio and multimedia features through the main audio system. For the latest information about this product and other Kia products and accessories, visit http:www.kia.co.kr.
WARNING & SAFETY INFORMATION Safety Symbols Warning: When encountering this symbol in the manual, you must follow these recommendations to avoid irreparable damage to your car, system or connected devices or to avoid accidents with injuries or death. Caution: When encountering this symbol in the manual, you must be very careful and follow the recommendations to avoid damage to your car, system or connected devices or to avoid injury.
¾ ¾ ¾ ¾ ¾ Do not dismantle, assemble, or modify the AV system. Do not stare at the screen for long periods of time while driving. To reduce the risk of traffic accidents, do not watch the screen when driving. Set the volume to a level which allows you to be aware of external conditions. Use only the supplied mounting hardware for safe operation. Caution ¾ Do not operate the AV system for prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge.
COPYRIGHTS & TRADEMARKS © 2010 Kia Motors. All Rights Reserved. - Copyright / Trademark information - Relevant logos, trademarks, related descriptions The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.
PART I. GETTING STARTED 1. Main Features List of Main Features here across all system features 2. Controls and Features 1.
Key (1) DISC EJECT (2) FM/AM (3) SIRIUS (4) MEDIA (5) POWER/VOLUME (6) ∨SEEK TRACK∧ (7) ∨ CAT/HD ∧ (8) TUNE (9) SETUP (8) PHONE (9) JUKEBOX (10) CLOCK Feature Ejects the inserted disc. Turns on FM/AM mode. Each press of the [FM/AM] key will change the band in the order of FM -> AM -> FM. Turns on SIRIUS mode. Turns on MEDIA mode. Each press of the [MEDIA] key will change the mode in the order of CD -> USB/iPod/zune -> AUX -> BT Audio -> CD. Push: Turns Power On/Off. Dial: Turns Volume Up/Down.
2. Steering Wheel Key (2) ∨SEEK TRACK∧ (2) + VOLUME (3) MODE Feature Short (under 0.8 seconds) In FM/AM mode, automatically searches and plays the previous or next preset frequency. In SIRIUS mode, automatically searches and plays the previous or next preset channel. In MEDIA mode (CD, MP3, USB, IPOD, ZUNE, BT AUDIO), plays the previous or next track, song, file, or chapter. In JUKEBOX mode, plays the previous or next track. Long (over 0.
(4) MUTE (5) Voice Command JUEKBOX (Virtual CD / My Music) ->FM. Mutes the sound. Short (under 0.8 seconds) If Voice recognition is off, turns on Voice recognition. If Voice recognition is on, waits for Voice command. Long (over 0.8 seconds) Update later (6) Bluetooth Phone (7) End Bluetooth Phone Turns on Phone mode. When a SMS message is received, opens message. Turns off Phone mode. When a SMS message is received, ignores message. 3. Basic Features 1. System Power Turning System Power On 1.
¾ Pressing any one of the [FM/AM], [SIRIUS], [MEDIA] and [JUKEBOX] keys will turn on the system and display the last mode corresponding to each key. For example, pressing the [MEDIA] key will turn on the system and display CD mode if the last operated MEDIA mode prior to turning off the system had been CD mode. Turn System Power Off 1. While the system is on, press the [POWER/VOLUME] knob to turn the system off.
4. Press any key on the control panel or steering wheel controller to turn the display back on excluding the [SEEK TRACK ∧] or [SEEK TRACK ∨] keys. Touching any part of the screen will also turn the display back on. NOTE > When the display is turned off and you press the [SEEK TRACK ∧] or [SEEK TRACK ∨] keys, it will operate normal SEEK/TRACK features. For example, if the display is turned off while in CD Mode, pressing the [SEEK TRACK ∧] or [SEEK TRACK ∨] keys for under 0.
4. Select the desired language. If not, press the [ ] button to return to the previous display. PHONE # Language 67.5ºF 08:23 [?] DoEnglish you want to change language? ~ {the Français System will be rebooted. Phone(s) & Voice datas will be initialized { Español Yes No Í (change image) 5. 6. If the language is changed, the above screen is displayed. To continue, press the [Yes] button. The system will reboot and automatically restore the most recent mode. Clock Section – Refer to Separate File 5.
Initializing the system 1. Press the [SETUP] key on the control panel. 2. Press the [System] button. 3. Press the [Factory defaults] button. 4. The system will reboot and automatically turn on FM mode. NOTE ¾ Initializing the system will erase all Phone settings, Virtual CDs, My Music files, and other changes which you have made to the system. ¾ Make sure you have backed up all important files before initializing. 4. Sound and Display Settings 1.
Sound settings can be adjusted from all audio modes. Press the [SOUND] button on the main screen of all audio modes to enter Sound Setup mode. 1. Press the [Sound] button on the main screen of each audio mode (FM/AM, SIRIUS, MEDIA, JUKEBOX) to enter Sound Setup mode. FADER/BALANCE Changing Fader/Balance allows you to adjust the position of sound within the vehicle.
TONE Changing Tone allows you to make changes to the Treble, Middle and Bass settings. 1. Press the Tone setup button. 2. 3. Use the left/right (arrow) buttons to make changes to Treble, Middle and Bass. Press the [ ] button to return to Sound Setup mode. NOTE > Press the [Default] button to restore the default setting.. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved.
become saved. Speed Dependent Volume Control Speed Dependent Volume Control allows you to automatically control the volume according to the speed of the vehicle. This feature will gradually increase the volume as speed increases to offset outside noise. 1. Press the [On] or [Off] button next to the Speed Dependent Volume Control menu to turn the feature on or off. NOTE > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved.
each option are displayed on the screen. 3. Press the [ ] button to return to Sound Setup mode. NOTE > Press the [Default] button to restore the default setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. Power Bass SETUP 8 Audio Sound Setup Speed Dependent Volume Control 67.5ºF 08:23 2/2 ~ On { Off Variable EQ Normal Power Bass Middle à Default 1. Press the Power Bass setup button. 2.
1. Press the [SETUP] key on the control panel. 2. Press the [Display] button to enter Display Setup mode. Setting Brightness The UVO audio system allows you to control the screen brightness automatically and manually. Automatic Brightness Control When the Display brightness is set to automatic, the brightness will be controlled automatically by assessing the amount of ambient light. 1. Press the [Display] button.
2. Press the [Automatic] button. Manual Brightness Control 1. Press the [Display] button. 2. Press the [Daylight] or [Night] buttons on the screen. 3. 4. Use the left/right (image) arrow buttons to adjust the display brightness. Press the [ ] button to return to Display Setup mode.
> When Brightness control is set to [Automatic], the manual left/right (image) arrow buttons are not active. > Press the [Default] button to restore the default setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. Turning Display On and Off This feature turns off the display, allowing you to listen only to audio. It is a useful feature when you driving at night and wish to eliminate glare from the display.
2. Press the [Main] button. 3. Press the [On] or [Off] button next to the Text Scroll menu to turn the feature on or off. PART II. AUDIO FEATURES 1.
Update later Listening to the FM/AM radio 1. Press the [FA/AM] key on the control panel. The most recently played FM/AM radio band will automatically begin playing. 2. Press the [FM/AM] key to switch to the desired radio band. NOTE ¾ Each press of the [FM/AM] key will change the band in the order of FM -> AM -> FM. ¾ Even when the system power is off, press the [FM/AM] key to turn on the most recently played FM/AM mode.
2. Select the desired preset and press the button to start listening. NOTE In the preset list screen, the [∨] [∧] keys on the steering wheel controller and the [TUNE] knob can also be used to select the desired preset. Press the [∨] [∧] keys (under 0.8 seconds) on the steering wheel controller to flip through the presets sequentially. Pressing and holding the [∨] [∧] keys (over 0.8 seconds) on the steering wheel controller will operate SEEK.
1. Press the [SCAN] button. NOTE ¾ When scanning has completed an entire revolution, the scan function will be terminated automatically and the previous played frequency will be restored. Preset Scan Preset scan will scan presets in the current band (FM- 12 presets AM- 6 presets) in sequential order. Each preset will be played for 5 seconds. Viewing FM/AM Station information When listening to a HD or RBDS radio stations, you will be able to view station information. 1. Press the Radio icon. 2.
2. SIRIUS MODE SIRIUS Mode Screen and Features No Button Name Description Listening to the SIRIUS radio 1. Press the [SIRIUS] key on the control panel. The most recently played SIRIUS channel will automatically begin playing. NOTE ¾ Even when the system power is off, press the [SIRIUS] key to turn on the most recently played SIRIUS channel. Selecting a SIRIUS channel Selecting through SEEK 1. Press the [SEEK TRACK ∧] or [SEEK TRACK ∨] keys on the control panel for under 0.
display the corresponding channel information 2. When you find the desired SIRIUS channel, press the [TUNE] knob to listen to the selected channel. Selecting through preset 1. Press the [Presets] button. 2. Select the desired preset and press the button to start listening. NOTE In the preset list screen, the [∨] [∧] keys on the steering wheel controller and the [TUNE] knob can also be used to select the desired preset. Press the [∨] [∧] keys (under 0.
2. Input the desired channel number and press the [Done] button. To delete entries, press the [Delete] button. Selecting through SIRIUS category list You can select SIRIUS channels through the category list. 1. Press the [List] button to display channel lists. 2. Select the desired channel to start listening or press the [Category List] button to display the channels in the selected category. Using Skip 1. Press the [List] button. The channel list will be displayed.
2. Press the [Skip Setting] button. 3. Select the channels you wish to skip. When selected, a [check mark] will be displayed next to the selected channel. Storing preset Presets are a way for you to save your favorite SIRIUS channels. Up to 18 presets can be saved in SIRIUS mode. 1. Select the desired SIRIUS channel. 2. Press the [Preset] button.
3. From the preset list, press and hold (over 0.8 seconds) the preset number button to which you wish to save. 4. The current radio broadcast will automatically be saved to the present number. A beep will signify that the preset has been saved. Viewing SIRIUS channel information 1. Press the SIRIUS icon. 2. Information about the current channel (channel, category, artist, title) will be displayed. Updating SIRIUS (Firmware, channel, subscription) Update later 3.
Play/Pause 1. Insert or connect the desired track/ song/ file (Audio CD, MP3 CD, USB, iPod, zune) or press the [MEDIA] key on the control panel if the desired track/ song/ file has already been inserted or connected. 2. When a desired media is playing and you wish to pause, press the [pause] button next to the progress bar. Press the [►] button to restart the media. REW/FF 1. Press and hold the [SEEK TRACK ∧] or [SEEK TRACK ∨] keys (over 0.
1. 2. NOTE ¾ Press the [Shuffle] button. The ‘Shuffle’ icon will be displayed. Press once to turn on the Shuffle setting and again to turn off. The Repeat and Shuffle settings cannot be used simultaneously. 1. AUDIO CD MODE Cautions upon handling Audio CDs Precautions upon handling discs ● Store discs within their intended cases to prevent scratches. ● Never use heart-shaped, octagon-shaped or any other abnormally shaped discs. ● Never expose discs to direct sunlight for prolonged periods of time.
Disc Size 5inch (12.7cm) Disc Format CD MP3 Audio Format LPCM MPEG1, Layer3 MPEG2, Layer3 MPEG2.5 Ver. 9 WMA ● CD-R or CD-RW DISC burned with a bulk CD without quality guarantees may not be recognized by the device. ● Inserting an abnormal disc may result in faulty operation. Disc/content format and compatibility Ordinary disc compatibility ● This system has been designed to be compatible with software bearing the following logo marks.
is recommended. AUDIO CD Mode Screen and Features No Button Name Description update later Inserting/Ejecting a Disc Inserting a Disc Insert the disc into the slot. The disc will begin playing automatically after it has been inserted. NOTE ¾ If the operation mode had been Audio mode before inserting the disc, the device will convert to the DISC mode screen and begin playing. Ejecting a Disc Press the [ ] button. The disc will immediately be stopped and ejected.
NOTE ¾ If the disc is straddled on the slot without removing for approximately 10 seconds, the disc will be reinserted automatically into the disc player. In such a case, the disc will not begin playing automatically. Listening to an Audio CD 1. Insert a CD or press the [MEDIA] key on the control panel if the CD has already been inserted. 2. When a track is playing and you wish to pause, press the [pause] button next to the progress bar. Press the [►] button to restart the track.
1. Press the [Copy] button. 2. Select an empty CD slot to which you wish to save the CD. 3. Once copying is complete, you can listen to copied CDs in Virtual CD mode. Note ¾ When creating a Virtual CD, you are free to listen to all modes except CD mode and Virtual CD mode. ¾ Copying can be canceled at anytime. While copying is in progress, press the [Cancel] button. However, if one or more tracks have already been copied, a virtual CD will be created.
● Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) ● Recommended bit rate & reference sampling frequency: 96,128, 192 kbps fixed bit rate /44.1KHz ID3 tag ●This device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. Supported media ●The MP3 media supported by the device are CD-ROM and USB. Supported media formats ● This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below.
Listening to a MP3 CD 1. Insert an MP3 CD or press the [MEDIA] key on the control panel if the CD has already been inserted. No GUI 2. When a song is playing and you wish to pause, press the [pause] button next to the progress bar. Press the [►] button to restart the song. NOTE ¾ Each press of the [MEDIA] key will change the mode in the order of CD -> USB/iPod/zune -> AUX -> BT AUDIO -> CD.
1. Press the [List] button. 2. Press the name of the song from the list. The song will automatically start playing. NOTE ¾ In the MP3 list screen, the [∨] [∧] keys on the steering wheel controller and the [TUNE] knob can also be used to select the desired song. by Artist, Albums, Genres, Songs, Composers, Explore CD update later Viewing song information When listening to an MP3 CD song, you can browse through song details and information. No GUI 1. Press the Album art icon. 2. 3.
Copying the current song The Kia UVO audio system allows you to copy songs from an MP3 CD into My Music. 1. Press the [Copy] button. 2. Once copying is complete, you can listen to copied music in My Music mode. NOTE > When copying one song, the [Cancel] button will be inactive. Copying songs from list 1. Press the [List] button.
2. Press the [Edit] button. 3. Select the songs you wish to copy. When selected, a [check mark] will be displayed next to the song. To select all songs, press the [Select All] button. All of the songs in the play list will be selected. 4. After selecting the desired songs, press the [Copy] button. 5. Once copying is complete, you can listen to copied music in My Music mode.
¾ ¾ When copying MP3 CD songs, you can listen to all modes except CD mode and My Music mode. Copying can be canceled at anytime. While copying is in progress, press the [Cancel] button. 3. USB MODE Cautions upon handling USB MP3 The MP3 file standards supported by the device are as follows. ●Acceptable standard: MPEG1 AUDIO LAYER 3 ●Acceptable sampling frequency: 32, 44.
the audio power is turned off or when operating a different mode. ● The time required to recognize a USB device may differ depending on the type, size, or file formats stored on the USB. Such differences in time are not indications of malfunction. Please wait until the system becomes recognized. ● This system supports only USB devices used to play music files. ● Do not use the USB I/F to charge batteries or USB accessories that generate heat. This may lead to worsened performance or system damage.
Listening to music songs 1. Connect a USB device or press the [MEDIA] key on the control panel if a USB has already been connected. 2. When a song is playing and you wish to pause, press the [pause] button next to the progress bar. Press the [►] button to restart the song. NOTE ¾ Each press of the [MEDIA] key will change the mode in the order of CD -> USB/iPod/zune -> AUX > BT AUDIO -> CD. ¾ For some media formats, the system requires time for media indexing.
2. Press the name of the song from the list. The song will automatically start playing. NOTE ¾ In the MP3 list screen, the [∨] [∧] keys on the steering wheel controller and the [TUNE] knob can also be used to select the desired song. by Folder, Artist, Albums, Genres, Songs, Composers Update later Viewing song information When listening to an MP3 CD song, you can browse through song details and information. 1. Press the Album art icon. 2. 3.
on the control panel or [∨] [∧] keys on the steering wheel controller to select different MP3 songs. For more information, refer to the ‘Selecting a music song’ section. Copying song into My Music Copying the current song 1. Press the [Copy] button. 2. Once copying is complete, you can listen to copied music in My Music mode. NOTE > When copying one song, the [Cancel] button will be inactive. Copying songs from list 1. Press the [List] button.
2. Press the [Edit] button. 3. Select the songs you wish to copy. When selected, a [check mark] will be displayed next to the song. To select all songs, press the [Select All] button. All of the songs in the play list will be selected. 4. After selecting the desired songs, press the [Copy] button. 5. No GUI Once copying is complete, you can listen to copied music in My Music mode.
information on deleting My Music songs, refer to the 'Managing My Music’ section. ¾ When copying USB songs, you can listen to all modes except USB mode and My Music mode. ¾ Copying can be canceled at anytime. While copying is in progress, press the [Cancel] button. 4. iPod MODE About iPod Trademark iPod® is a registered trademark of Apple, Inc. Connecting your iPod Device Connect your iPod device as shown in the picture.
Listening to your iPod 1. Connect an iPod device or press the [MEDIA] key on the control panel if an iPod device has already been connected. 2. When a file is playing and you wish to pause, press the [pause] button next to the progress bar. Press the [►] button to restart the file. NOTE ¾ Each press of the [MEDIA] key will change the mode in the order of CD -> USB/iPod/zune -> AUX > BT AUDIO -> CD. Selecting iPod music Selecting through file up/down 1.
NOTE ¾ In the iPod list screen, the [∨] [∧] keys on the steering wheel controller and the [TUNE] knob can also be used to select the desired file. By Artist, Albums, Genres, Songs, Podcasts, Composers, Audiobooks Viewing file information When listening to your iPod, you can browse through file details and information. 1. 2. 3. Press the Album art icon. The file information (Title, Album, Artist, Genre) for the current MP3 file will be displayed. Press the [ ] button to return to the previous screen. 5.
Listening to your zune 1. Connect a zune device or press the [MEDIA] key on the control panel if a zune device has already been connected. 2. When a file is playing and you wish to pause, press the [pause] button next to the progress bar. Press the [►] button to restart the file. NOTE ¾ Each press of the [MEDIA] key will change the mode in the order of CD -> USB/iPod/zune -> AUX > BT AUDIO -> CD. ¾ When connecting some external media formats, the system requires time for media indexing.
2. Press the name of the file from the list. The file will automatically start playing. By Artist, Albums, Genres, Songs, Composers, Viewing file information When listening to your zune, you can browse through file details and information. 1. 2. 3. Press the Album art icon. The file information (Title, Album, Artist, Genre) for the current MP3 file will be displayed. Press the [ ] button to return to the previous screen. 8.
Image here NOTE ¾ Connecting your AUX device with the vehicle will not provide power to your AUX device. If you plan on using your AUX device for long periods of time, make sure to charge with a cigarette jack power adaptor or a separate USB cable. Listening to AUX media 1. Connect an AUX device or press the [MEDIA] key on the control panel if the AUX device has already been connected. 2. Once in AUX mode, the connected audio will automatically begin playing from the car system. 9.
Listening to music from your Bluetooth device 1. Pair your Bluetooth device to the handsfree system. *For more information on pairing your handset devices, refer to the ‘Pairing your handset device to the handsfree system’ section. 2. Press the [MEDIA] key on the control panel to turn on BT audio mode. 3. When streaming music from your Bluetooth device and you wish to pause, press the [pause] button next on the screen. Press the [►] button to restart music.
Virtual CD Mode The Kia UVO Audio System allows you to copy up to 5 physical audio CDs and store them in the system as Virtual CDs, simplifying the process of storing and managing CDs. The Kia UVO system offers you with maximum convenience by allowing you to copy audio CDs and store them as Virtual CDs within the system. For more information on creating Virtual CDs, refer to the ‘Creating a Virtual CD’ section. Listening to a Virtual CD 1.
2. Press the [TUNE] knob to play the selected song. Selecting from the playlist 1. Press the [List] button. 2. Press the name of the song from the list. The song will automatically start playing. by Artist, Album, Genres, Songs, Composers update later REW/FF a song 1. panel 2. 3. Press and hold the [SEEK TRACK ∧] or [SEEK TRACK ∨] keys (over 0.8 seconds) on the control or the [∧ ∨] keys on the steering wheel controller.
1. Press the [Repeat] button. The 'Repeat’ icon will be displayed. 2. Press once to turn on the Repeat setting and again to turn off. Using Shuffle The Shuffle setting can be used to play all songs in the playlist randomly. 1. 2. Press the [Shuffle] button. The ‘Shuffle’ icon will be displayed. Press once to turn on the Shuffle setting and again to turn off. Adding Favorites The My Favorites feature allows you to create a separate Favorites list of songs. 1.
2. 3. The heart icon will be displayed on the screen to signify that the song has been saved in Favorites. To delete a song from Favorites, press the [empty heart] button Playing Favorites 1. While playing My Music, press the [List] button. 2. Press the [Home] button. 3. In the My Music main mode screen, press the [Favorites] button.
4. Press the name of the song from the list. The song will begin playing. NOTE ¾ The Favorites button will be inactive when there are no songs saved as Favorites. ¾ When deleting favorites from the Favorites list, the deleted favorites will be removed from the favorites list. The songs will not be deleted from the system. Memory Management Checking System Information 1. Press the [SETUP] key on the control panel. 2. Press the [SYSTEM] button. 3. Press the [System Information] button.
4. The system information screen shows you the memory currently in use and total memory. Deleting Virtual CDs and My Music Deleting Virtual CDs 1. While in Virtual CD mode, press the [List] button. 2. Press the [Edit] button. 3. Select the Virtual CD slot you wish to delete. When selected, a [check mark] will be displayed next to the selected CD slot. 4. Press the [Delete] button.
5. Once deleting is complete, press the [OK] button. Deleting My Music (No GUIs) 1. While in My Music mode, press the [List] button. 2. Press the [Edit] button. 3. Select the songs you wish to cancel. When selected, a [check mark] will be displayed next to the selected song. To select all songs, press the [Select All] button. All of the songs in the play list will be selected. 4. Press the [Delete] button. 5. When the [ ] window is displayed, press the [Yes] button. 6. Press the [OK] button.
NOTE ¾ When using the [Delete all copy files] feature, all virtual CDs and My music files will be deleted. PART III. PHONE FEATURES 1. Using your Bluetooth Handsfree system Welcome to Kia’s connected world of wireless personal networking. The UVO Audio with Bluetooth® wireless technology allows you to safely and conveniently use various Bluetooth phone features as you drive your vehicle. The Kia UVO Bluetooth® handsfree system offers: Place main features here 2.
connection between your handsfree system and handset device. A Bluetooth ® connection is made between your handsfree system and handset device with a paired link. When setting up a paired link, the handsfree system will always remember your handset device. Once the system is paired with the device, your hand-free system can be set so that it automatically connects to your handset each time you start your vehicle.
6. Once pairing is complete, the connections list, handset device will be shown…… Å- FIX SENTENCE. NOTE >initial pairing, takes some time due to downloading of contacts <- FIX / Some handset devices may not support contacts dl. >Before connecting the Bluetooth handsfree system with the handset device, check to see that the handset device supports Bluetooth handsfree and Bluetooth feature has been turned on.
4. When the above screen is displayed, press the [Delete] button. 5. Press the [OK] button. NOTE > When you delete a paired phone, all downloaded data will also be erased. For instance, deleting a paired phone will also erase recent calls, contact lists, and SMS data from the system.
2. Press the [Connections] button. 3. Use the scroll bar to select the handset device you want to disconnect. 4. Once the above screen is displayed, press the [Disconnect] button. Note If you select a handset which is not currently connected, the [Disconnect] button will not be displayed. Check to see that you have selected the proper handset device. Setting Priority 4.
1. When there is an incoming call, the screen on the will be displayed. Press the [Accept] button on the screen or the [PHONE] key on the control panel or the [Call] key on the steering wheel controller to answer the call. 2. The call will be connected. Note You can also accept an incoming call using your handset device if you wish to talk in private mode. Rejecting an incoming call 1. 2. Press the [Reject] button on the screen or the [End] key on the steering wheel controller.
Note > The Call waiting function may not be supported in some handset devices. Placing a call by dialing a number 1. Press the [PHONE] key on the control panel. 2. Press the [Dial Number] button. 3. Use the dial pad on the right side of the screen to enter the phone number. 4. Press the [SEND] button on the screen or the [Call] key on the steering wheel controller to connect the call. Note > You can delete digits by pressing the [Delete] or [End] button on the screen.
by contact list 1. Press the [PHONE] key on the control panel. 2. Press the [Contacts] button. 3. Select the contact you want to call from the list. 4. Press the [SEND] button on the screen or the [Call] key on the steering wheel controller to connect the call. By recent calls 1. Press the [PHONE] key.
2. Press the [Recent Calls] button. 3. Select the contact you want to call from the list. 4. Press the [SEND] button on the screen or the [Call] key on the steering wheel controller to connect the call. 5. If you want to call the most recent call you last made, press and hold the [SEND] button in the ‘Phone’ screen or the [Call] key on the steering wheel. Note > Recent calls will be deleted automatically when a handset device is disconnected from the system. > Recent calls can be sorted.
2. Press the [Contacts] button. 3. Press the [Add] button. 4. The contacts from the currently paired handset device will automatically downloading the contacts from the handset device. NOTE > Add OBEX related limitations (upload contact from phone) here – information required > The Mobile, Home and Office numbers can be saved for each contact. Select the number you wish to call and press the corresponding [Send] button.
2. Press the [Contacts] button. 3. Press the [Search] button. 4. [Press the [Search by name] button 5. Enter the name you wish to find and press the [Search] button. No GUI 6. The search results are displayed. No GUI 7. Press the [Send] button to connect the call.
Note > When searching contacts by name, you do not need to enter the entire name to conduct the search. by number 1. Press the [PHONE] key. 2. Press the [Contacts] button. 3. Press the [Search] button. 4. Press the [Search by number] button.
5. Enter the number you wish to find and press the [Search] button. No GUI 6. The search results are displayed. If there is more than 1 result, use the scroll bar to find and select the desired contact. No GUI 7. Press the [Send] button to connect the call. Note > When searching contacts by number, you do not need to enter the entire number to conduct the search.
3. Press the message to view message details. 4. Press the [Read] button to check the message. Note ¾ When a mobile phone has been paired with the system, new incoming messages will automatically be notified through the system. ¾ When the notification window is displayed, press the [Yes] button to check the new incoming message.
Update later Caution > SMS features can be used only while the vehicle is parked. Switching the call between handsfree and handset device When you receive an incoming call, you have the option of using the handsfree or talking privately by using the handset device. Transferring the handsfree call to your Handset device 1. After pressing the [Accept] button for an incoming call, the following screen will be displayed. 2. Press the [Private] button. The call will be transferred to the handset device.
2. Press the [Use handsfree] button to transfer the call to the handsfree. NOTE ¾ Once a handset device has been paired with the system, accepting an incoming call by pressing the [Accept] button will automatically connect the call in handsfree mode. 5. Phone settings Setting Phone Volume 1. Press the [Phone] key. 2. Press the [Settings] button. 3. Use the [left] / [right] buttons to control the volume to the desired level. Note ¾ Press the [Default] button to restore the default setting.
Streaming Audio is a feature which turns on/off BT Audio Mode. For more information on BT Audio, refer to the ‘BT Audio Mode’ section in the Audio Features chapter of the user’s manual. 1. While in Phone Settings, press the [Settings] button. 2. Press the [On] or [Off] button next to the Streaming Audio menu. NOTE > Press the [Default] button to restore the default setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved.
1. While in Phone Settings, press the [Settings] button. 2. Press the [On] or [Off] button next to the Contacts Sync menu. NOTE > Press the [Default] button to restore the default setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. SMS Sync SMS Sync is a feature which automatically downloads unread incoming messages. 1. While in Phone Settings, press the [Settings] button.
2. Press the [On] or [Off] button next to the SMS Sync menu. NOTE > Press the [Default] button to restore the default setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. Changing passkey The passkey is the authentication code needed whenever you pair a new handset device. 1. While in Phone Settings, press the [Settings] button. 2. Press the [pass key number] button next to the passkey menu.
3. Input the new passkey and press the [Done] button to save. Note > The default passkey is 0000. > The passkey can be set only when the vehicle is parked. PART IV. VOICE COMMANDS 1. Conditions for voice command system The Kia UVO voice control system includes a special handsfree microphone mounted about the driver-side seat of your car which blocks out (filters out) ambient noise and allows you to operate system features through voice commands while maintaining proper posture.
Turning Command Feedback On and Off 1. Press the [Voice] button. 2. Press the [On] or [Off] button next to the Command Feedback menu. NOTE > Press the [Default] button to restore the Voice Command to the [On] setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved.
1. Press the [Voice] button. 2. Use the left/right (image) arrow buttons to adjust the voice command volume. 3. Press the [ ] button to return to the Setup screen. NOTE > Press the [Default] button to restore the default setting. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 3. Operating by Voice Command Turning on modes by voice command New section here on basic voice command to operate each mode and basic operations of each mode.
1. Press the [Voice] button. 2. Press the [Default] button next to the Speaker Adaptation menu. 3. After reading the instructions, press the [Create a Profile] button. 4. Input the name of the profile you wish to use and press the [Done] button.
Software Update required NOTE > There are 10 commands in the training set. For each one, press the speak button and read the command on the screen. Selecting a Previous Voice Profile 1. Press the [Voice] button.
2. Press the [Profile name] button next to the Speaker Adaptation menu. 3. Press the name of the profile. NOTE > Press the [None (Default)] button to restore the default profile. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. Deleting a Voice Profile 1. Press the [Voice] button.
2. Press the [Profile name] button next to the Speaker Adaptation menu. 3. Press the [Delete] button next to the name of the profile. 4. Press the [Yes] button. NOTE > Press the [None (Default)] button to restore the default profile. > Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 4. Voice Command List FOR Voice Command List, require discussion on which ones to list in the manual and which to exclude (if any).
Command ● ○ ● ● ● Exit Go back Repeat Help Voice command feedback {on, off} Operation Exits the current mode. Returns to the previous step. Repeats the command feedback. Displays the main Help screen. Turns command feedback on/off. Command List – Audio Commands 1. FM/AM Radio Command ● ● ● ● ● ● ○ Radio Radio {FM, AM} Radio {87.5 – 107.
● ● ● ○ ○ ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Show audiobooks Show podcasts *iPod only Show composers What’s playing? Repeat {on, off} Shuffle {on, off} Play {Bluetooth audio, AUX} Play {zune, iPod, USB} artist {name} Play {zune, iPod, USB} album {name} Play {zune, iPod, USB} track {name} Play {zune, iPod, USB} playlist {name} Play {zune, iPod, USB} genre {genre} Play {zune, iPod, USB} composer {name} Play iPod audiobook {title} Play iPod podcast {podcast} Show {zune, iPod, USB} artist {name} Show
● ● ● ● ● ● ○ ○ ○ ○ ○ ○ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Show artists Show albums Show playlists Show genres Show tracks Show composers What’s playing? Play My Music favorites Add to favorites Remove from favorites Repeat {on, off} Shuffle {on, off} Play My Music artist {artist name} Play My Music album {album name} Play My Music track {track name} Play My Music playlist {name} Play My Music genre {genre} Play My Music composer {name} Show My Music artist {artist name} Show My Music album {album name} Sho
● ● ● Send SMS Send SMS to {name} Recent calls Sends the current SMS message. Sends the current SMS message to the desired person. Turns on Recent Calls list screen. PART V. REAR VIEW CAMERA 1. About Rear View Camera > For maximum user safety, the UVO audio system is connected with a rear view camera. > The Rear View Camera System uses an exterior camera integrated to the rear of the vehicle that sends video feedback to the UVO system.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.