Quick Manual
Contents PART 1. UVO eServices ........................................................................................ 3 Chapter 1. Name and function of the each part ................................................... 3 1.1 Room Mirror Switch ............................................................................. 3 Chapter 2. Before using UVO eServices ............................................................ 3 2.1 What is the UVO eServices? .......................................................
PART 1. UVO eServices Chapter 1. Name and function of the each part 1.1 Room Mirror Switch Items Contents eServices Guide • It provides guidance on how to use UVO eServices. • If re-select it while calling to the center agents, the call will be terminated. Google Local Search (Voice Recognition) Search Points of Interest in Google map by voice recognition. Roadside Assist • If there is any issues in the vehicle, you can connect with a Roadside Assist agent.
You can check receiving/sending signal status as referring to the status is shown in the UVO eServices phone screen. We recommend you use UVO eServices system when the antenna signal ( ) is higher than 4. Some areas might be influenced by receiving/sending signal so that the use of UVO eServices is limited. • Tunnel • Mountain or forest • Road closed to cliff • Buildings concentrated in areas • Highway or under the bridge • Inside building Chapter 3.
1. 2. 3. 4. Service Activation: You can activate the service via accessing Center. 911 Connect: This feature is used to turn on or off the 911 Connect feature. Wi-Fi Settings: The network of the digital device can be shared to the system device through Wi-Fi. Modem Information: You can check phone number, USIM and IMEI information. Chapter 4. UVO eServices 4.
1. 2. 3. 4. 5. 6. Point of Interest: It shows received POI list. Delete Selected Items: Select POI and delete it. Delete All: Delete all POI list. Call: Call to POI. Show Map: POI will be shown on the map. Previous/Nest: It shows previous or next POI information. You can check POI information which received from Smart Phone and UVO Website. POI can be saved maximum 200 lists, if the storage is full, it delete the recently saved POI automatically. Registering UVO eServices is required to use My POIs. 4.
▶ When enabling this feature, you must first agree to the 911 Connect terms of use. After reading the terms of use, press the ‘Agree’ button to accept. 5.2 Modem Information ▶ Select [UVO] key in the Headunit Select [UVO Settings] Select [Modem Information] 1. 2. USIM : It shows ICCID information. IMEI: It shows identity number of the mobile phone. 5.
1 2 3 4 5 ▶ Screen Structure 1. Wi-Fi : You can turn on/off Wi-Fi. 2. MAC Address : It shows the MAC Address (It is not a button.) 3. Refresh : It searches nearby AP(Access Point) (Manual Search function) 4. AP name : It shows searched AP's name. 5. Add Wi-Fi Network : It registers AP to connect the hidden AP. ▶ The order of network connection 1. In the digital device, turn on the Hotspot option in network settings. 2.
"!! #$('&'% 3=>G 9EI>DA9BH =5G 699B H9GH98 5B8 ;CIB8 HC 7CAD@M K>H= H=9 @>A>HG ;CF 5 -@5GG , 8><>H5@ 89J>79# DIFGI5BH HC D5FH ') C; H=9 .
