Service Repair Manual

CARBURETOR

REMOVAL

1. Disconnect battery ground cable.

2. Remove air cleaner.

3. Disconnect the throttle cable from carburetor.

4. Disconnect the vacuum hoses from carburetor.

5. Disconnect connectors for solenoid valves and TPS.

6. Place a container under fuel fittings of carburetor to catch

any fuel that may be trapped in fuel line and disconnect the

fuel hoses from the carburetor inlet nipples.

Remove carburetor mounting bolts and carefully remove the

carburetor from engine. Hold carburetor level to avoid spilling

fuel from fuel bowl.

DISASSEMBLY

Remove the throttle return spring from the throttle lever and

throttle return spring bracket unscrewing two screws.

2. Remove the dash pot rod from the free lever.

Unscrewing two screws, remove the bracket with two

connectors and off the connectors.

31-116