Service Repair Manual

CARBURETOR
4. Pull the hose with delay valve off the nipple of choke breaker.
5.
Remove the float chamber cover screws “B” to remove the
throttle body.
6.
Remove the screws “A” to remove the float chamber cover
from main body.
7.
To remove the float chamber cover assembly, insert a screw
driver blade between the enrichment cover and the float
chamber cover as illustrated and lightly pry and lift up slowly.
CAUTION
Do not apply excessive force.
8.
Remove the pin and then remove the float and needle valve.
CAUTION
1) Do not let the float drop or supply collapsing load.
2) Use care not to damage the end of the needle valve.