Service Repair Manual

CARBURETOR
29. Remove the main jets.
NOTE
When removing the main jets, use a screwdriver that is
an exact fit and work carefully to prevent damage.
30.
31.
32.
Remove the three screws attaching the enrichment valve
cover to the enrichment housing on the float chamber.
Remove the cover, spring and diaphragm.
Unscrew the enrichment valve from the housing.
33. Using a screwdriver, loosen the enrichment jet and take out
the spring and ball from the enrichment jet valve.
CAUTION
The valve has many small parts. Do not lose them.
34. Remove the four screws (thread sealant supplied) attaching
the accelerator pump cover to the float chamber.
35. Remove the accelerator pump cover, diaphragm, spring,
pump body and gaskets.
31-123