Service Repair Manual

FUEL TANK (MPI)
5. To connect the high pressure hose to the fuel pump,
temporarily tighten the flare nut by hand; then tighten it to
the specified torque. Be careful that the fuel hose does not
twist.
Tightening torque
High pressure hose flare nut . . . . . . . . . . . . . . . . . . . . . . . . .
31-41 Nm (320420 kg.mm, 23-30 lb.ft)
CAUTION
When tightening the flare nut, be careful not to bend or
twist the line to prevent damage to the fuel pump
connection.
6. Connect the electrical fuel pump and fuel gauge unit
connector.
7. Tighten the drain plug to the specified torque.
Tightening torque
Drain plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15-25 Nm (150-250 kg.cm, 11-18 lb.ft)
31-63