Service Repair Manual

GENERAL
SPECIFICATIONS
Fuel tank
Capacity
Fuel filter
Type [In-line filter]
Type [In-tank filter]
Fuel pump
Type
Driven by
Feed pressure
Carburetor
Type
Identification mark
M/T
A/T
Throttle bore
Primary
Secondary
Feedback solenoid valve (FBSV)
Type
Coil resistance
Slow cut solenoid valve (SCSV)
Type
Coil resistance
Throttle position sensor (TPS)
Type
Regulating voltage (When throttle
valve fully closed)
Coil resistance
Bow vent valve (BVV)
Type
Vacuum orifice
Mixture control valve (MCV)
Type
Dash pot
Type
Operating rpm (When SAS 2 touches
free lever)
Outer venturi dia.
Primary
Secondary
Inner venturi dia.
Primary
Secondary
45 lit. (11.9 U.S.gal., 9.9 Imp.gal.)
Cartridge type
Open type
Mechanical diaphragm type
Camshaft
19-25 kPa (2.76-3.63 psi) at 2,500 rpm
Down-draft, 2-barrel, feed back type
472 (For Canada), 474 (For Federal)
475 (For Federal)
30 mm (1.181 in.)
32 mm (1.260 in.)
Duty cycle solenoid
54-66 fl [At 20°C (68ºF)l
Duty cycle solenoid
48-60 fl [At 20°C (68ºF)]
Variable resistor type (Rotary type)
0.25V
3.5-6.5 KD
Vacuum type
0.3 mm (0.012 in.)
Vacuum type
Conventional type
Approx. 1,800 rpm
20 mm (0.787 in.)
25 mm (0.984 in.)
9-14 mm (0.354-0.551 in.)
9-12 mm (0.354-0.472 in.)
31-70