L22R1W
HDMI
1 1.Power SCAN HDMI 2 14 3.Not available 3 1 2 3 4 5 6 7 8 9 INPUT 4. Input selection 5.MENU 6.Volume/Channel Selection 15 0 16 MENU MUTE 5 17 OK VOL+ 18 7 10 11 12 13 CCD PIP SLEEP S.MODE MTS/SAP H.LOCK FREEZE SWAP MOVE 12.Not available 14.HDMI mode RECALL ARC 10.Not available 13.Not available CHEXIT P.MODE 9.Select the aspect ratio 11.Not available CH+ 6 VOL- 7.Exit On Screen Display 8.Adjust Picture Mode DISPLAY 4 8 9 2.SCAN FAVORITE 19 15.
SCAN HDMI 1 2 4 5 7 8 3 6 9 INPUT DISPLAY 0 MENU MUTE CH+ VOL- OK VOL+ CHEXIT P.MODE CCD PIP RECALL ARC SLEEP S.MODE MTS/SAP H.
Press H.LOCK to enter it and input the password correctly, the H.LOCK menu will appear on the screen(The initial password is 0000). Change password: The password can be changed. Press CH+/- to select Change password and VOL+/OK to enter. The screen will display New PW:----, then enter the new password and the screen display Confirm PW:----, if the same password is input correctly twice, the old password will be changed. Tuner Lock: The tuner can be locked. Press CH+/- to select.
In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to illustrate the TV operation. Press INPUT to select the input source, and the menu for each source is different. 1. Press MENU button to display the main menu, and VOL+/-to select the main menu. 2. Press CH+/- to scroll through the parameters. 3. Press VOL+/- buttons to make changes to the parameters. 4. Press EXIT button to exit the menu.
Picture Menu Options continued 2. Press CH+/- button to enter the picture menu and to go up and down to select the desired option. 3.Press VOL+/- button to increase and decrease the level to adjust the selected option to your preference. 4. Repeat step 2 and step 3 until desired picture quality has been achieved. Function: Picture Mode: Press VOL+/- to select: Standard Soft Bright User. Contrast : Adjust the contrast of the picture . The contrast becomes higher as the number increase.
Sound Menu Options Sound can be adjusted for any input as follows: 1. Press MENU and VOL+/- button until the following menu appears on the screen. SOUND SOUND MODE BALANCE BASS TREBLE SURROUND RESET STANDARD OFF You can adjust sound options to the levels you prefer. 2. Press CH+/- button to enter the audio menu and to go up and down to select the desired option . 3.Press VOL+/- button to increase and decrease the level to adjust the selected option to your preference . 4.
Menu Language Selection: The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU button and VOL+/- until the following menu appears on the screen. FUNCTION LANGUAGE ASPECT RATIO MENU TIME HALFTONE BLUE SCREEN PIC.OPTIMIZE ENGLISH FULL 15S 50 OFF 2. Press CH+/- button to enter the function menu and to go up and down to select the desired option . 3. Press VOL+/- button to adjust theselected option to your preference .
Tuner Menu Options 1. Press MENU and VOL+/- button until the following menu appears on the screen. TUNING AUTO SEARCH CHANNEL COLOR SYSTEM SOUND SYSTEM MANUAL SEARCH FINE TUNE 2 AUTO D/K 42.12MHZ Note: This menu appears only in TV mode 2. Press CH+/- button to enter the turning menu and to go up and down to select the desired option . 3.Press VOL+/- button to adjust the selected option to your preference . Functions: Auto Search: Auto search and save the channel .
Timer Menu Options 1. Press MENU and VOL+/- button until the following menu appears on the screen. TIMER CURRENT TIME OFF TIME ON TIME ON CHANNEL REMIND TIME REMIND CHANNEL 00:58 --:---:-----:---- 2. Press CH+/- button to enter the turning menu and to go up and down to select the desired option . 3.Press VOL+/- button to adjust the selected option to your preference. Functions: Current Time: Set the Correct time. Off Time: Set the time that the TV goes off automatically.
Adjust Menu Options 1. Press MENU and VOL+/- button until the following menu appears on the screen. PC H-Position V-Position Clock Phase Auto Adjust Note: This menu appears only in TV mode 2. Press CH+/- button to enter the adjust menu and to go up and down to select the desired option . 3.Press VOL+/- button to increase and decrease the level to adjust the selected option to your preference . Functions: H-Position: Picture horizontal position adjust. V-Position: Picture vertical position adjust.
22 PAL, NTSC 2.5W+2.
V0.