Operation Manual

1
FEATURES OF YOUR HYUNDAI
32
3. After confirming that (a) and (b) are
latched, pull the seat belt out of the
retractor and insert the metal tab (c) into
the buckle (d).
B220A02TG
B200A02NF-AAT
SEAT BELTS - Rear Seat Center 3-
Point System With Combination
Locking Retractor (If Installed)
1. Pull the seat belt out of the rear seat
package tray.
2. Before fastening the rear seat center
belt, confirm the metal tab (a) and buckle
(b) are latched together.
B220A01TG
The seat belt is released by pressing the
release button in the locking buckle. When
it is released, the belt should automatically
draw back into the retractor.
If this does not happen, check the belt to be
sure it is not twisted, then try again.
B210A01A-AAT
To Release the Seat Belt
B210A01NF