PANTONE COLOR 432 U PANTONE COLOR 432 U
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DECLARATION OF CONFORMITY For the following product : All of Digital sigange HYUNDAI IT provides Manufactured at : (factory name, address) 1. Hyundai IT Corp. 1229 In-ri, Apo-eup Gimcheon, Gyeongsangbuk-do 740-860 Rep. of Korea 2. Hyundai IT Corp. San 136-1 Ami-ri, Bubal-eub, Ichon-si, Kyungki-Do, 467-860 Rep.
Contents Major features................................................................................................2 Safety Information.........................................................................................2 Be sure to understand...................................................................................5 Check the product list....................................................................................6 Proper location for product installation...........................
DIGITAL SIGNAGE Major features This product has been designed to enable the user ease of use, and display information effectively and conveniently.
- The main plug of the power supply cord shall remain readily operable. - An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection. - Make sure that the power cord and other cables are correctly plugged in. - Plug the power cord correctly into the end, do not wobble/jiggle, it may cause electric shock fire. - Do not touch the power cord with wet hands, it may cause electric shock.
DIGITAL SIGNAGE - Do not hang on or jump to the product or mounting rack. - When the product is left unused for a long time, be sure to unplug the power cord. - In the case of damage or breakage do not attempt to self repair, please contact local service engineer. - For D460SL(I), D525SL(I), D705ML(I/G), D705SL(I), D825SL(I), install the product on the flat surface and secure the wheels not to move itself or fall down.
DIGITAL SIGNAGE Image quality of the product English Be sure to understand CAUSE Due to the nature of LCD's property, Afterimage can occur. Afterimage appears when identical frames / images are displayed continuasly. If displayed for prolonged periods of time this can become permanent. PREVENTION When you display a freeze frame for a long time, lower the brightness and contrast (Brightness, 70/ Contrast, 80). Also it can be prevented by using moving frame.
DIGITAL SIGNAGE Check the product list Please check the following components provided with the product after you open the box. Base Frame Type Kiosk Type (Portrait) ! Kiosk Type (Landscape) Remote control & batteries Power Cord User's manual D-SUB Cable HDMI to DVI Cable (Option) HDMI cable RS232C Cable (Option) please check the following components provided with the product after you open the box and contact the dealer if any missing.
Proper location for product installation 1. Locate the product at least 30cm away from the electric appliance or heating product. 2. The product must be placed at least 10cm away from the wall and ground. 3. Keep the product out of direct ray of light and locate screen not to be reflected by the sunlight. 4. Make sure the mounting rack firmly tightened before installation.
DIGITAL SIGNAGE Title and function of each part Control Panel 1 Remote control receiving sensor. 2 Power display LED red-stand by/ Green-working. 3 ~ 0 OSD button. 3 Power button ; to turn the power on or off. 4 Input selection button : to select other connected 5 6 7 8 9 0 device. 3 4 5 POWER SOURCE MENU 6 Menu button : to display menu or exit from the menu. select button. To move down in OSD menu. To move up in OSD menu. To move left and control the volume down in OSD menu.
DIGITAL SIGNAGE 1 AC IN 2 7 PC D-SUB OUT AC POWER SWITCH 8 # COMPONENT OUT (Y Pb Pr) UPGRADE English Terminal panel $ CVBS IN 3 HDMI IN 9 PC AUDIO IN % CVBS OUT 4 HDMI OUT 0 RS-232C OUT ^ COMPONENT AUDIO IN (L R) 5 SPEAKER OUT ! RS-232C IN & COMPOSITE AUDIO IN (L R) 6 PC D-SUB IN @ 1 COMPONENT IN (Y Pb Pr) 2 5 3 4 6 7 8 0 @ $ ^ 9 ! # % & ** The locations of connectors may vary depending on models. - The items no. 12–17 are optional items.
DIGITAL SIGNAGE Remote control 1 2 3 4 6 7 5 9 8 1 To turn the power on or off. 2 Move up in OSD menu. 3 To move left or control the volume down in OSD menu. 4 To move right or control the volume up in OSD menu. 5 To move down in OSD menu. 6 Select in OSD menu. 7 Display the menu screen. 8 Close the menu screen. 9 Convert the input signal. How to insert batteries 1 Pull while pressing at rear lid. 2 Insert the batteries into proper polarities (+,-). 3 Use after the lid closed. 10/36 DID_eng.
DIGITAL SIGNAGE English How to Connecting Kiosk PC or Source (Satellite receiver, Camcorder etc.) 11/36 DID_eng.
DIGITAL SIGNAGE How to Connecting Digital RGB(HDMI) 1 2 1. Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power. 1 when connect HDMI to HDMI cable 2 when connect DVI to HDMI cable – must utilize device with DVI signal output from peripheral device 2. Connect the power code to the product. 3. Turn on the power of the product and peripheral device. Screen shows up within 10 seconds. 4.
Support timing for HDMI nds. ! NO Resolution Horizontal frequency (KHz) Vertical frequency (Hz) 1 480p 640 x 480p 60 2 576p 720 x 576p 50 3 720p 1280 x 720p 50 / 60 4 1080i 1920 x 1080i 50 / 60 5 640 x 480 31.47 59.94 6 640 x 480 37.88 60.32 7 1024 x 768 48.36 60 8 1360 x 768 47.70 60 9 1360 x 768 64.00 60 10 1600 x 1200 75.00 60 11 1920 x 1080 67.
DIGITAL SIGNAGE How to Connecting analog RGB (PC D-SUB) 1. Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power. 2. Connect D-SUB to D-Sub cable. Then tighten the screw of the cable after connecting PC D-SUB. 3. Connect the power cord to the product. 4. Turn on the power of the product and PC . The screen will appear within 10 seconds. 5. Select "PC" input by pressing "SOURCE" on OSD button or remote control.
Support timing for PC ! NO Resolution Horizontal frequency (KHz) Vertical frequency (Hz) 1 640 x 480 31.47 59.94 2 800 x 600 37.88 60.32 3 1024 x 768 48.36 60.00 4 1360 x 768 47.71 60.00 5 1280 x 1024 64.00 60.00 6 1600 x 1200 75.00 60.00 7 1920 x 1080 67.50 60.00 English DIGITAL SIGNAGE 5, 6 and 7 are only for Full HD 15/36 DID_eng.
DIGITAL SIGNAGE How to Connecting the component (Option) 1. Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power. 2. Connect the component cables to Y, Pb, and Pr correctly. Connect BNC cable and tighten. 3. Connect the power cord to the product. 4. Turn on the power of the product and peripheral device . The screen will appear within 10 seconds. 5. Select "COMPONENT" input by pressing "SOURCE" on OSD button or remote control.
Support timing for component & AV ! NO Resolution Horizontal frequency (KHz) Vertical frequency (Hz) 1 480i 720 x 480i 59.94 / 60 640 x 480p 59.94 / 60 2 480p 420 x 480p 59.94 / 60 3 576i 720 x 576i 50 4 576p 720 x 576p 50 5 720p 1280 x 720p 59.94 / 60 / 50 6 1080i 1920 x 1080i 59.94 / 60 / 50 7 1080p 1920 x 1080p 60 / 50 English DIGITAL SIGNAGE 7 is only for Full HD 17/36 DID_eng.
DIGITAL SIGNAGE How to Connecting the the video (Option) 1. Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power. 2. Connect video cable and BNC cable, and then tighten. 3. Connect the power cord to the product. 4. Turn on the power of the product and peripheral device . The screen will appear within 10 seconds. 5. Select AV input by pressing "SOURCE" on OSD button or remote control. 18/36 DID_eng.
DIGITAL SIGNAGE Users can automatically adjust the picture mode according to the input mode. Picture Picture Picture Mode How to Select the Picture Mode U English Adjusting OSD and explanation of its function : Custom Picture Mode Custom Dynamic Custom High Colour Tone Standard Colour Tone Middle Size : Movie : Low NR : Mild Film Mode : Adjust Enter Menu : Size U PC NR : Adjust Enter Custom Menu 1. Press Menu button.
DIGITAL SIGNAGE How to Set the Desired Picture Users can manually adjust their desired picture Custom U Brightness : 40 Contrast : 80 Colour : 50 Tint : 50 Sharpness : 60 Move Adjust Menu 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Picture" Icon. "Picture mode" is highlighted. 3. Press ▲ / ▼ buttons to move to "Custom" and press ▶or ↲ buttons to select "Custom". 4.
How to Select a Colour Tone Users can adjust Color as users want. Colour Tone U Colour Tone : Custom Red : 50 Green : 50 Blue : 50 Move Enter 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Picture" Icon. "Picture Mode" is highlighted. 3. Press ▲ / ▼ buttons to move to "Colour Tone" 4. Press ▶ or ↲ buttons to select "Colour Tone" . 5. Press ▲ / ▼ buttons, then the menu changes in the following order.
DIGITAL SIGNAGE How to Set the Display Size Users can adjust the display scale as they want Picture Picture Picture Mode U : Auto size Custom Wide Colour Tone Picture Mode : Custom Colour Tone 4:3 : Wide Panorama Size : Zoom NR : 4:3 PC Film Mode : 14 : 9 NR : Adjust Select Menu Size U Adjust Enter Menu 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Picture" Icon. "Picture Mode" is highlighted. 3.
How to set image adjustment in PC mode (Supported only in PC mode) Picture Auto Adjust U Phase : 52 H-Posilion : 16 V-Posilion : 24 Fiequency : -78 Move Enter Menu 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Picture" Icon. "Picture Mode" is highlighted. 3. Press ▲ / ▼ buttons to move to PC and press ▶ or ↲ buttons to select to "PC" 4. "Auto Adjust" is high lighted. 5. Press ↲ button to execute the "Auto Adjust" 6.
DIGITAL SIGNAGE ow to Set Noise H Reduction(NR) User can eliminate noises on the screen in AV/Component/HDMI mode.(Not supported in PC mode) Picture Picture Mode U ow to Select the Audio H Mode : Custom Colour Tone Size : Off NR : On Film Mode : Adjust Enter 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Picture" Icon. "Picture Mode" is highlighted. 3. Press ▲ / ▼ buttons to move to "NR" . 4. Press ◀ / ▶ buttons to select to "NR". 5.
DIGITAL SIGNAGE Users can adjust sound mode automatically as they want. Sound Sound Mode : Volume : 34 Balance : L50 R50 Equalizer U English How to Adjust the Desired Audio Mode Custom Auto Volume : Off Sound Mode : Stereo Move Enter Menu U 10KHz 50 3KHz 50 1KHz 50 300Hz 50 100Hz 50 Move L Adjust Menu 1. P ress Menu button. Menu items appear on the screen. 2. P ress ▲ / ▼ buttons to move to "Sound" Icon. 3. P ress ↲ button to select "Sound" Icon.
DIGITAL SIGNAGE How to Select Auto Volume This function will automatically give a similar volume size to each channel. Sound Mode : Volume : Balance : On Auto Volume : Off Sound Mode : Equalizer U How to Select Sound Mode Adjust Enter Menu 1. P ress Menu button. Menu items appear on the screen. 2. Press ▲ / ▼ buttons to move to "Sound" Icon. 3. Press ↲ button to select "Sound" Icon. "Mode" is highlighted. 4. Press ▲ / ▼ buttons to move to "Auto Volume". 5.
DIGITAL SIGNAGE Setup Reset Time Language : OSD Tone : Key Lock : Enter Select 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Setup" Icon. "Reset" is highlighted. 3. Press ▶ or ↲ buttons to select to "Reset". 4. Press ↲ buttons to choose to "Reset". 5. Press EXIT button to escape OSD MENU or press MENU button to return to the previous menu. English How to Reset Menu When you select "Reset" user setting Value will initialize.
DIGITAL SIGNAGE Setup U Reset Time Language : English OSD Tone : Off Key Lock : Off Move Select 6. Press ▲ / ▼ buttons to move to "On or Off Timer". 7. Press ▶ or ↲ buttons to select "On or Off Timer" . 8. Press ◀ / ▶ buttons to move between Hour, Minute and on/ off and Press ▲ / ▼ buttons to set Hour, Minute and on/off 9.
How to set OSD tone Setup U How to Set Key-Lock Reset Time Language : Off OSD Tone : On Key Lock : Adjust Enter 1. Press Menu button. Menu items appear on the screen. 2. Press ↲ button to select "Setup" Icon. "Reset" is highlighted. 3. Press ▲ / ▼ buttons to move to "OSD Tone" 4. Press ▶ or ↲ buttons to select to "OSD Tone". 5. Press ▲ / ▼ or ↲ buttons to set to "On/Off". English DIGITAL SIGNAGE Menu User can lock the control buttons on the front bottom of the Monitor.
DIGITAL SIGNAGE ow to Set the Multi H Function Multi Multi H Set CounL : 0 Multi Function V Set CounL : 0 Heal Control Display Sequence : 0 H Edge ADJ : 0 V Edge ADJ : 0 SET ID : 0 Master U Move Off Adjust Menu U Move Enter Menu 1. P ress Menu button.Menu items appear on the screen. 2. Press ▲ / ▼ button to move to "Multi" Icon. 3. P ress ↲ button to select "Mutli" Icon. "Mutli Function" is highlighted 4.
DIGITAL SIGNAGE installation item Product 1 Product 2 Product 3 Product 4 Product 5 Product 6 H Set Count 3 3 3 3 3 3 V Set Count 2 2 2 2 2 2 Display Sequence 1 2 3 4 5 6 H Edge ADJ / V Edge ADJ These are the set up value to make up the un-displayed area of Bezel Part. It can be adjustable according to the contents SET ID It is necessary to control via RS232 communication port on PC.
DIGITAL SIGNAGE ow to Set the Heat H Control "Heat control" allows you set up fan operation according to interior temperture of the product Multi Multi U Multi Function Fan Control : Off Heal Control Fan Active Temp : 50 °C Hysteresis : 50 °C Temprature : 50 °C Move Enter Menu U Move Enter Menu 1. P ress Menu button. Menu items appear on the screen. 2. P ress ▲ / ▼ button to move to "Multi" Icon. 3. P ress ↲ button to select "Multi" Icon.
DIGITAL SIGNAGE When the product is not working properly, please check before you call customer center. English Diagnosis Symptoms How to solve the problem Screen displays late after the power is on. It happens not to show the screen noise when the power is on. Therefore it is not a defect. But if the screen doesn't show up within 5 minutes from turning on, please contact the customer center. The screen is too dark or bright? Adjust the brightness or contrast.
DIGITAL SIGNAGE Symptoms How to solve the problem The screen displays without the sound. check the volume up and down with remote control and audio connection cable No sound from either right speaker or left speaker. Confirm the status of the sound balance on OSD menu and check the connection of speaker cable. Remote control doesn't work. Check if any foreign substances in the sensor and the polarity of battery inserted. If the batteries are drained, replace them with new batteries.
DIGITAL SIGNAGE D320ML(I/G)/D400ML/ D420ML(I/G/P/T)/ D460ML(I/G/P/T/H)/ D468ML(I/G/P/T/H)/D460SL(I) Model LCD Screen size (HxV/mm) Recommended resolution Input D320ML(I/G) / D400ML / D420ML(I/G/P/T) / D460ML(I/G/P/T/H) / D468ML(I/G/P/T/H) / D460SL(I) English Specifications 1366 x 768 Pixel (HD) D320ML(I/G) : 697.7 x 392.3 / Pixel pitch 0.51 D400ML : 885.2 x 497.7 / Pixel pitch 0.65 D420ML(I/G/P/T) : 930.3 x 523.0 / Pixel pitch 0.68 D460ML(I/G/P/T/H), D468ML(I/G/P/T/H) : 1018.4x572.5 / Pixel 0.
DIGITAL SIGNAGE Specifications D405ML(I/G)/D407ML(I/G/P/T)/ D425ML(I/G/P/T)/D465ML(I/G)/ D467ML(I/G/P/T)/ D525ML(I/G)/ D825ML(I/G)/ D525SL(I)/ D705ML(I/G)/D705SL(I)/ D825SL(I) Model LCD Screen size (HxV/mm) Recommended resolution Input D405ML(I/G) : 885.6 x 498.15 / Pixel pitch 0.46 D407ML(I/G/P/T) : 885.2 x 497.7 / Pixel pitch 0.46 D425ML(I/G/P/T) : 930.25 x 523 / Pixel pitch 0.4845 x 0.4845 D465ML(I/G) : 1018.08 x 572.67 / Pixel pitch 0.53 D467ML(I/G/P/T) : 1018.4 x 572.5 / Pixel pitch 0.
< REMOTE CONTROL / RS232C COMMAND SPEC > 1. SPEED : 9600 Baud/s, 8 bit, No parity, 1 Stop bit. 2. REMOTE CONTROL WAVE FORM 1) Remote Control System Infrared rey system fosc=455KHZ fc=fosc/2=37.917KHZ 2) Signal code 2-1) Transmission - One pulse LEAD CODE CUSTOM CODE CUSTOM CODE DATA CODE DATA CODE LEAD CODE CUSTOM CODE HIGH CUSTOM CODE DATA CODE DATA CODE LOW LEAD CODE CUSTOM DATA CODE DATA CODE LOWCODE CUSTOM HIGHCODE LOW HIGH 9ms 4.5ms 9ms 4.5ms 9ms 4.5ms - Bit Desciption Bit “0” Bit “1” 0.56ms 0.
3. REMOTE CONTROL KEY CODE TABLE DATA LAYOUT Custom Code : 7788H KEY DATA POWER 0x80 MENU 0x95 EXIT 0x96 SOURCE 0xAC ENTER 0x8C UP 0x8D DOWN 0x8E LEFT 0x8F RIGHT 0x90 8O 8D 8F 8C 9O 8E 95 96 AC 4. COMMAND FORMAT * SET ID must select from the OSD menu and can't be select through the COMMAND. * Only one unit can be set as Master unit, select Master ON from the OSD Menu.
5.
6. REMOTE CONTROL KEY CODE TABLE Key value Key value q quit ( from Ir mode ) t volume up p power v volume down u up r mute n down c picturemode j left l sleep k right d sound e enter s s.mode m menu y info->display x exit The others quit ( from Ir mode ) i input 7. REMOTE CONTROL KEY CODE TABLE Command Description did:all-wn=si.
HYUNDAI IT Service Center @ DID_eng.
