DECLARATION OF CONFORMITY WE Hyundai IT COPR.
Table of Contents Important Tip/Image Sticking Precaution ...............................1 Safety Precaution .................................................................2 Contents of the Package .......................................................6 Products Sold Separately ......................................................6 Parts Names and Functions ..................................................7 Remote Control ...................................................................
General Information Image Sticking Precaution ENGLISH When watching a still Image within motion pictures and Wide/Panorama/Zoom/ /4:3 screen/14:9 Wide,Panorama,Zoom,4:3,14:9, screen Box still image 1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retentions on the edges when watching for a long time - This phenomenon happens also to products from other manufacturers.
General Information Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. ENGLISH Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.
General Information Safety Precaution ......................................................................................Continued from previous page ENGLISH The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth. Do not use a damaged power cord or plug, or loose outlet.
General Information ENGLISH Do not block ventilating slits with a table cloth. - Blocking the ventilation slits may produce internal heat increase, resulting in a fire. Please avoid touching the panel at the rear of TV as it is producing high temperature. - Direct contact with the hot surface may cause physical burns. Do not place any heat sources such as radiators and heat registers, etc. near the TV. - It may cause a fire. Do not place toys and cookies, etc.
General Information Safety Precaution ......................................................................................Continued from previous page ENGLISH The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Unplug the product during lightning or thunderstorms and never touch the antenna cable. - It may cause a fire or an electric shock. Do not install the product on the floor.
General Information Contents of the Package When opening the package, please ensure to check the following accessories. ENGLISH Antenna Cable (coaxial cable) Power Cord Remote Control & 2 batteries (1.5V AAA) User's Guide Products Sold Separately If you want to purchase the following accessories, consult a service center, electronics shops, or parts seller.
General Information Parts Names and Functions ENGLISH Front View - E260D/E320D/E370D/E420D/E460D MODEL * This product image may be a bit different from the actual product. Volume buttons Use these buttons to adjust sound levels. These buttons also serve as the cursors of Select/Adjust in Menu mode. Channel buttons Use these buttons to change channels. These buttons also serve as the cursors of Down and Up buttons in Menu mode. Select button Use this button to select each item from the menu mode.
General Information Rear View - E260D/E320D/E370D/E420D/E460D MODEL ENGLISH * This product image may be a bit different from the actual product.
General Information ENGLISH Front View - E261D/E321D/E371D/E421D/E461D MODEL * This product image may be a bit different from the actual product. Volume buttons Use these buttons to adjust sound levels. These buttons also serve as the cursors of Select/Adjust in Menu mode. Channel buttons Use these buttons to change channels. These buttons also serve as the cursors of Down and Up buttons in Menu mode. Select button Use this button to select each item from the menu mode.
General Information Rear View - E261D/E321D/E371D/E421D/E461D MODEL ENGLISH * This product image may be a bit different from the actual product.
General Information ENGLISH Remote Control SOURCE SLEEP CH-LIST INFO GUIDE TV/RADIO S.MODE PIP P-SOURCE SUB-PR 0 PICTURE VOL TTX/MIX SOUND MUTE A/D INDEX PR LIST/FLOF STORE STAND ROT TV 11 VCR DVD SAT SET 1. POWER/STANDBY 2. POWER LED 3. SOURCE Use this button to select External Input. 4. STILL 5. INFOMATION Use this button to display resolution or various programs. 6. S-MODE 7. PIP FUNCTIONS - PIP : Use this button for PIP On/Off.
General Information Teletext & Fastext Function (See pages 36 for more details.) CH-LIST GUIDE TV/RADIO S.MODE P-SOURCE SUB-PR 0 PICTURE VOL TTX/MIX SOUND MUTE INDEX A/D PR LIST/FLOF STORE 1. CH. LIST key to To watch the channel list for Digital TV. Press confirm or press EXIT to return to previous channels. 2. GUIDE (EPG-Electronic Program Guide) To watch the program information. Press once more to return to normal mode.
Connections Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ENGLISH - Antenna or Cable service without cable box connections - For on optimum picture quality, adjust the direction of antenna if needed. VHF Antenna UHF Antenna Antenna cable ✓ When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend. ✓ If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
Connections Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following instruction to enjoy the best picture quality. Best picture quality is displayed in the following order. ENGLISH HDMI HDMI, DVI-I, D-Sub COMPONENT FULL SCART S-VIDEO COMPOSITE HALF SCAT The superior picture quality starts from the far left side. How to Connect a DTV Receiver or DVD Player 1.
Connections How to Connect a VCR, Cable Receiver, Camcoder, Game Player ENGLISH 1. Connect the Video cable or S-Video cable between Video/S-Video output terminals of VCR or Cable receiver and Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.) 2. Connect the Audio cable (Left: white, Right: red) between Audio output terminals of VCR or cable receiver and Audio input terminal of TV. (Connect the jacks to terminals in the same color.
Connections Resolutions Supported in PC Model Resolution 640 x 350 26” / 32” / 37” / 42” / 46 720 x 400 800 x 600 Vertical frequency 70.00 72.80 75.00 70.08 60.32 75.00 72.19 49.73 48.36 56.48 60.02 63.98 61.27 74.55 60.00 70.07 75.03 60.02 74.99 832 x 624 1024 x 768 1280 x 1024 1366 x 768 ENGLISH 640 x 480 Horizontal frequency 31.47 37.86 31.50 31.47 37.88 46.88 48.08 Scart Connection to the External Input/Output If you have a second VCR and wish to copy cassettes tape.
Connections HDMI Connection (For HDMI model only) ENGLISH HDMI*1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information. To the HDMI™ input terminal, you can connect an EIA/CEA-861/861*2 compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI output terminal.
Connections How to Set the OSD Screen SOURCE CH-LIST INFO GUIDE TV/RADIO S.MODE PIP P-SOURCE SUB-PR 0 ANALOG TV - Terrestrial broadcasting for supporting analog PAL/SECAM system. H-SCART - Basically the same as Full SCART in function but not supporting RGB Video signals. ENGLISH SLEEP F-SCART - For supporting composite video and RGB video signals. SCART connectors is used with many European video equipments.
Picture Setup How to Select the Picture Mode ENGLISH Users can automatically adjust the picture mode according to the input mode. 1 2 Press MENU button. Menu items appear on the screen. Press button to select “Picture” Icon. “PICTURE MODE” is highlighted. 3 Press 4 The menu changes in the following order. CUSTOM ➛ DYNAMIC ➛ STANDARD ➛ MOVIE ➛ MILD 5 Press EXIT button to TV viewing or press MENU button to return to the previous menu. / or buttons to select “Picture mode”.
Picture Setup How to Set the Desired Picture in PC, HDMI Input Modes Users can adjust Color as users want. Press MENU button. Menu items appear on the screen. 2 3 4 5 6 7 Press button to select “Picture” Icon. picture mode is highlighted. Press / or ENGLISH 1 buttons to select to ”picture mode”. The menu changes in the following order. ➛ CUSTOM ➛ HIGH ➛ MIDDLE ➛ LOW After selecting Color Tone, then the menu changes in the following order.
Picture Setup How to Select a Color Tone ENGLISH Users can adjust Color as users want. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 Press button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / buttons, then the menu changes in the following order. ➛ COOL2 ➛ COOL1 ➛NORMAL ➛ WARM1 ➛ WARM2 6 Press EXIT button to TV viewing or press MENU button to return to the previous menu. Press / buttons to move to “COLOR TONE”. Press / or buttons to select “COLOR TONE”.
Picture Setup How to Set Noise Reduction(NR) User can eliminate noises on the screen in Video mode Press MENU button. Menu items appear on the screen. 2 3 4 5 6 Press button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / buttons to move to “NR”. Press / buttons to select to “NR”. Press / or ENGLISH 1 buttons to set ON/OFF . Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Sound Setup How to Select the Audio Mode ENGLISH Users can adjust sound mode automatically as they want. 1 Press MENU button. Menu items appear on the screen. 2 3 4 Press 5 / buttons to move to “SOUND” icon. Press button to select “SOUND” Icon. “MODE” is highlighted. Press / or buttons, to select to “SOUND MODE” then the menu changes in the following order. CUSTOM ➛ STANDARD ➛ MUSIC ➛ MOVIE ➛ SPEECH ➛ Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Sound Setup How to Select Auto Volume This function will automatically give a similar volume size to each channel. Press MENU button. Menu items appear on the screen. 2 3 4 5 6 7 Press / ENGLISH 1 buttons to move to “SOUND” icon. Press button to select “SOUND” icon. “MODE” is highlighted. Press / buttons to move to “AUTO VOLUME ” . Press / or buttons to select ON/OFF . Press / or buttons to set to ON/OFF .
Sound Setup How to Select Surround ENGLISH This function processes multi-channel surround sound through two speakers. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 6 Press button to select “SOUND” Icon. “MODE” is highlighted. Press / buttons to move to “SURROUND”. Press / or buttons to select to SURROUND . Press / or buttons to set to ON/OFF Press EXIT button to TV viewing or press MENU button to return to the previous menu.
Channel Setup How to Select Auto Store Auto store enables to search/store channels of countries where the user is located automatically. Press MENU button. Menu items appear on the screen. 2 3 4 5 6 7 8 9 Press / ENGLISH 1 buttons to move to “CHANNEL” icon. Press button to select “CHANNEL” Icon. “COUNTRY” is highlighted. Press / or buttons to select “COUNTRY” Press / or buttons to set YOUR COUNTRY . Press / buttons to move to “AUTO STORE”. Press / or buttons to select AUTO STORE .
Channel Setup How to Set the Program Edit(Add/Delete, Sort, Name) ENGLISH Program edit enables users to edit the searched programs. Add/Delete Channel Name P 2 Erased – –– ––––– P 3 Erased – –– ––––– P 4 Erased – –– ––––– P 5 Erased – –– ––––– P 6 Erased – –– ––––– Prog. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 Press 6 / Buttons to move to “CHANNEL” icon. Press buttons to select “CHANNEL” Icon. “COUNTRY” is highlighted.
Channel/PIP Setup How to fine tune if the reception is clear, you do not have to fine tune, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. Press Menu button. Menu items appear on the screen. 2 3 4 5 6 button to select "channel"icon Press "country"is highlighted. Press / Press / Press / ENGLISH 1 buttons to move to "fine tune". or buttons to select to "fine tune".
PIP Setup In case of PIP mode, go to step 10 if you need to set the “Position” of Sub picture. ENGLISH 10 11 Press / buttons to move to “Positon” and Press / or button Press / button, then the mode will changes the following order. ➛ RIGHT BOTTOM ➛ RIGHT TOP ➛ LEFT TOP ➛ LEFT BOTTOM ➛ In case of PIP mode, go to step 12 if you need to set the “SWAP” of Main and sub pictures.
Function Setup How to Reset Press MENU button. Menu items appear on the screen. 2 3 4 5 Press button to select “Set up” Icon. “Reset” is highlighted. Press / Press buttons to choose to RESET . ENGLISH 1 or buttons to select to “RESET”. Press EXIT button to TV viewing or press MENU button to return to the previous menu. ✓ When you select “Reset” user setting value will initialize except channel value. How to Set Clock, Sleep Time, ON/OFF Time 1 Press Menu button.
Function Setup Go to step 6 if you need to set the “ON or OFF TIME”. ENGLISH 6 7 8 Press / buttons to move to “ON or OFF TIME”. Press / Press / / buttons to move between Hour, Minute and on/off and Press buttons to set Hour, Minute and on/off or buttons to select “ON or OFF TIME”. go to step 9 if you need to set the “ON TIME CHAMEL” or “ON TIME VOLUM” 9 10 Press Press / / buttons to move to on time channel or Volume. buttons to adjust on time channel or Volume.
Function Setup How to set osd tone Press MENU button. Menu items appear on the screen. 2 Press button to select "set up"icon “RESET” is highlighted. 3 4 5 Press / buttons to move to "osd tone" Press / or buttons to select to "osd tone". Press / or buttons to set to "on/off". ENGLISH 1 How to Set Teletext in ATV You can use Teletext service in analog TV mode. If it is included in you receiving channels. 1 Press “TTX/MIX” button and wait.
Function Setup Selecting Teletext Display Options in ATV Mode ENGLISH When users have displayed a teletext page, they can have various options to suit their requirements.
DTV Channel Setup How to Search Automatically This function can be used to get the latest program data while the receiver is still in use. Through this function, the receiver searches for all the available program and saves them in the memory. Press MENU button. Menu items appear on the screen. 2 3 Press 4 Press buttons to select AUTO SCAN” Automatic Scan menu appears, then auto scan activates. While searching, you can see the following menu on the screen.
DTV Channel Setup 11 Press / buttons to select “Bandwidth”, and set the proper value for the selected Channel. 12 13 Press Up and Down buttons to move to “Scan”. 14 Press EXIT button to TV viewing or press MENU button to return to the previous menu. Press buttons to store all the entered channel data. Then you can get the following menu showing the scanning process. After scanning process, the first channel of scanned channel will be displayed.
DTV Channel Setup How to Use the Guide (EPG : Electronic Program Guide) Users can check the channel information on the channels of the transponder they are watching. 1 Press MENU button. Menu items appear on the screen. 2 3 4 5 Press 6 / Buttons to move to “DTV CHANNEL” icon. Press button to select “DTV CHANNEL” Icon. “AUTO SCAN” is highlighted. Press / Buttons to move to “GUIDE”. Press buttons to select GUIDE” Program Guide menu appears.
DTV Channel Setup How to Select Channel List Users can change the current channel to any other channel they want. Press MENU button. Menu items appear on the screen. 1 2 3 4 5 Press button to select “DTV CHANNEL” Icon. “AUTO SCAN” is highlighted. 6 Press / (page up/down) or select the channel you want 7 8 Press Press Press / / buttons to move to “DTV CHANNEL” icon. buttons to move to “CHANNEL LIST”.
DTV Channel Setup How to Use Channel List Mode Users can see variant channel lists which may enable them to edit and select channels more conveniently. Press CH. LIST button. Channel list appears on the screen. 1 2 3 Select required option by pressing the buttons to select you want. 4 Press buttons. You will see the following mode. Press “ORANGE” button, then you can see “Channel List Mode” window. / buttons, then Press / ♦ Favorite Mode : You can see favorite 1 ~ 5 channel list.
DTV Channel Setup How to Set the Channel Order Users can organize the number or sequence of the channels. 1 2 3 4 5 6 Press CH. LIST button. Channel list menu appears on the screen. Press / or / buttons to select the channel you want to move. Press “YELLOW” buttons. Press / or / buttons to move to the position you want to move. Press buttons, the channels will move automatically to the programmed position. Press MENU, EXIT or button to finish the process.
DTV Channel Setup How to Add Channel Users add channels they want. 1 Press CH. LIST button. Channel list menu appears on the screen. 2 3 4 5 Press WHITE buttons. The Add Digital Channel window will appear. Select the channels with / buttons or numeric keys. Select required option by pressing the keys to enter the proper value. Press MENU, EXIT or / buttons, then Press numeric button to finish the process.
DTV Channel Setup Setting DayLight Saving Time(Summer Time) Users can use this menu when they want to change a TV channel to a Radio channel or vice versa. 1 2 Press / buttons to select “DL Saving” Press / buttons to select. Then it will change “YES” or “NO” YES : Set for daylight saving function activated. The current time automatically moves on hour ahead. NO : Set for daylights saving function deactivated. The current time automatically moves on hour behind.
DTV Channel Setup How to Subtitle / Audio Users can adjust the subtitle and audio condition/status of the current channel. 1 Press “S.MODE” button. Subtle and audio related window will be displayed on the screen. 2 Select required option by pressing the buttons to select you want. / buttons, then Press / If Dig. Output is supported, you can select MPEG Stereo or Dolby Digital/AC3.
DTV Channel Setup How to Set Teletext in DTV ITALIANO You can use Teletext service in iDTV mode. The icon on the screen means your TV is receiving Teletext service. 43 1 Press “TTX/MIX” button and wait. If the “*” sign pops up left upside of the screen as the following picture, wait until the teletext service menu is displayed “*” means it provides teletext service. So wait a moment. 2 Select your interesting item with numeric keys.
Appendix Troubleshooting Possible solution How can I install an antenna? Refer to page 13. TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on. Picture is distorted or frozen while watching digital broadcasting. Input Source information only appears on black screen. Poor reception on some channels. Black and white on some channels. TV won’t turn on.
Appendix ENGLISH Troubleshooting After setting the time, I turned TV off and turn it on. The programmed information has been erased. Symptom Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. Possible solution Too much noise occurs. Check whether the audio setting is in the Stereo mode.
Appendix Product Specifications E320D/E370D E420D/E460D Input Full-Scart 1 (A/V) 1 (A/V) 1 (A/V) Half-Scart 1 (A/V) 1 (A/V) 1 (A/V) S-Video 1 (A/V audio common) 1 (A/V audio common) 1 (A/V audio common) Video (RCA) 1 (Audio included) 1 (Audio included) 1 (Audio included) Component(Y/Cb/Cr) 1 (Audio included) 1 (Audio included) 1 (Audio included) Antenna 1 1 1 PC Connection jack D-SUB D-SUB D-SUB Max.
Appendix Product Specifications E261D E321D/E371D E421D/E461D Full-Scart 1 (A/V) 1 (A/V) 1 (A/V) Half-Scart 1 (A/V) 1 (A/V) 1 (A/V) S-Video 1 (A/V audio common) 1 (A/V audio common) 1 (A/V audio common) Video (RCA) 1 (Audio included) 1 (Audio included) 1 (Audio included) Component(Y/Cb/Cr) 1 (Audio included) 1 (Audio included) 1 (Audio included) Antenna 1 1 1 PC Connection jack D-SUB D-SUB D-SUB Max.
