FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning : NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.
HYUNDAI LCD TV Important Tip Image Retention Effect (Image Sticking) 1. Cause : - Image Retention Effect may come from displaying a still picture in certain period of time with at a certain area continuously, as the feature of LCD panel. This is caused due to brightness degradation. Many LCD manufacturers are trying to overcome this limitation. 2. Prevention - To avoid this matter, use the product after reducing brightness and contrast, especially when a still image is displaying for a long time.
Image Sticking Precaution When watching a still Image within motion pictures and Wide/4:3 screen Wide, 4:3 screen Box still image 1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retention on the edges when watching for a long time - This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still image for a long time.
HYUNDAI LCD TV Features Integrated HDTV An HDTV has a built-in ATSC digital tuner. It does not need a separate set-top box to receive over the-air DTV signal. Dual Scan/Multi-Viewing You can program analog TV broadcasting and digital TV broadcasting automatically at the same time for multi-viewing. A Wide Array of Screen Settings You can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the outside weather conditions).
HYUNDAI LCD TV Table of Contents General Information How to Set Audio Language ................................................40 Safety Precaution ................................................................5 How to Set the Digital Audio Output ....................................41 Contents of the Package .......................................................9 Products Sold Separately ......................................................9 Function Setup Parts Names and Functions .............
Safety Precaution GENERAL INFORMATION The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.
HYUNDAI LCD TV GENERAL INFORMATION If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth. Do not use a damaged power cord or plug, or loose outlet. - It may cause electric shock or fire. - It may cause a fire or an electric shock. Firmly plug in the power cord so that it does not pull out. - An unstable connection may cause fire.
Safety Precaution ......................................Continued from previous page GENERAL INFORMATION The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Do not block ventilating slits with a table cloth. - Blocking the ventilation slits may produce inner heat increase, resulting in a fire. Keep the TV at least 10cm away from the wall for ventilation. - Fire may be caused due to the rise of inner temperature.
HYUNDAI LCD TV GENERAL INFORMATION Unplug the product during lightning or thunderstorms and never touch the antenna cable. - It may cause a fire or an electric shock. Keep the remote control batteries out of sight and out reach of children. Do not install the product on the floor. - If it falls over, your child may be injured. - If your child swallows a battery, see your doctor immediately. When replacing batteries, make sure to match the batteries to the (+) and (-) marks in the battery compartment.
Contents of the Package GENERAL INFORMATION hen opening the package, please ensure to check the following accessories provided. Antenna Cable (coaxial cable) Power Cord CE UR SO N IO PT CA CT PE AS WER PO P EE SL ER D/ AD FO IN E IC RV SE ZE EE FR E UR PICT D UN SO V FA S SR P SA RF -/D + CH CH EV PR L+ VO IT EX LVO U MEN OK G EP CE UR SO RN TU R- TILT RN L-TU PIP CE UR SO ON SITI PO AP SW SIZE FF /O ON Remote Control & 2 batteries (1.
HYUNDAI LCD TV Parts Names and Functions GENERAL INFORMATION Front View - E260D/E320D/E370D * This product image may be a bit different from the actual product. Speaker Remote sensor and power LED. Select button Use this button to select each item of menu. - Point the remote control toward here. - It displays standby or operation status. Channel buttons Use these buttons to change channels. These buttons also serve as the cursor of Down and Up buttons when in Menu mode.
GENERAL INFORMATION Rear View - E260D/E320D/E370D * This product image may be a bit different from the actual product. Power Switch - For E260D/E320D Only use this switch to tum on/off power Power(AC) Input terminal Connect the power cord to this terminal. RS-232 input terminal Connect to the RS-232 terminal of a PC to check its service.
HYUNDAI LCD TV GENERAL INFORMATION Front View - E261D/E321D/E371D * This product image may be a bit different from the actual product. Speaker Remote sensor and power LED. Select button Use this button to select each item of menu. - Point the remote control toward here. - It displays standby or operation status. Channel buttons Use these buttons to change channels. These buttons also serve as the cursor of Down and Up buttons when in Menu mode.
GENERAL INFORMATION Rear View - E261D/E321D/E371D * This product image may be a bit different from the actual product. Power Switch - For E261D/E321D Only use this switch to tum on/off power Power(AC) Input terminal Connect the power cord to this terminal. RS-232 input terminal Connect to the RS-232 terminal of a PC to check its service.
HYUNDAI LCD TV Remote Control GENERAL INFORMATION 1. POWER/STANDBY 2. POWER LED 3. MUTE 4. ASPECT 5. CAPTION 6. ADD/ERASE Use this button to add or erase channels. 7. INFOMATION Use this button to display resolution or various program 8. PICTURE 9. SOUND 10. SRS Use this button to select 3D surround sound. 11. SAP Use this button to listen in a foreign language 12. EXIT Use this button to end the OSD 13. MENU SELECTION Use this button to select menu item 14.
GENERAL INFORMATION 21. SLEEP 22. FREEZE - Option 23. TILT 24. PIP - ON/OFF : Use this button for PIP on/off - Source : Use this button to select the source of sub-picture. - SIZE : Use this button to select the size of sub-picture. - POSITION : Use this button to select the position of sub-picture. - SWAP : Use this button to swap main and sub-picture. How to Insert Batteries in Remote Control Press and hold Δ part and push to open cover. * Battery type :1.
HYUNDAI LCD TV How to Watch Both Analog and Digital Broadcasts with a Single Antenna You can watch both analog and digital broadcasts by connecting a single antenna. Connection Method CONNECTIONS Make sure that the antenna cable is connected to ANT (ATV/DTV). - Antenna or Cable service without a cable box connections - For optimum picture quality, adjust antenna direction if need, - When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.
Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following information on connection to enjoy best picture quality. Video/Audio connectors CONNECTIONS Types of video/audio cable : ➀ HDMI ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE Best picture quality is displayed in the following order. The superior picture quality starts from the far left side. - When connecting an external device, ensure to read the connecting device’s manual.
HYUNDAI LCD TV How to Connect a VCR/Cable Receiver Connection Method Connect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver and Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.) 2 Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver and Audio input terminal of TV. (Connect the jacks to terminals in the same color.
How to Connect a SET-TOP BOX or DVD Player CONNECTIONS Connection Method 1 Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and the input terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/720p/1080i) on the rear of TV. (Connect the jacks to terminal in the same color.) 2 Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminal for DTV/DVD Audio on the rear of TV.
HYUNDAI LCD TV How to Connect a Camcorder/Game Player Connection Method Connect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player and Video/S-Video input terminal of TV. (Connect cables and terminal in the same colors.) 2 Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game player and Audio input terminal of TV. (Connect the jacks to terminals in the same color.
How to Connect to a PC CONNECTIONS Connection Method 1 Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of TV. 2 Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of TV. (Connect the jacks to terminals in the same color.) Audio Cable HDMI Cable or D-SUB cable When Using as a PC Monitor 1 Turn on TV and press on remote control until showing HDMI or VGA banner on the bottom side.
HYUNDAI LCD TV Resolutions Supported in PC Resolution Horizontal frequency Vertical frequency 31.47 59.94 37.50 75.00 31.47 70.08 37.88 60.32 46.88 75.00 48.36 60.00 56.50 70.10 60.02 75.
HDMI Connection CONNECTIONS HDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI*1 input terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such asa Set Top Box or DVD player with HDMI or DVI output terminal.
HYUNDAI LCD TV Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz CONNECTIONS Notes: • This HDMI connector is Type A. • If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or VIDEO input terminal on the TV so you can enjoy an analog signal. • The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top Box DIGITAL OUT terminal Output setting to 1080i, 480i or 480p.
How to Connect an External Visual Device You can connect your TV to other visual device to watch TV program at the same time. CONNECTIONS Connection Method 1 Connect the Composite Video cable between Video input terminals of an external device and the Video output terminals for Video on the rear of TV. (Connect the jacks to terminals in the same color.
HYUNDAI LCD TV How to Use Digital Sound Connection Method Connect the coaxial cable to the digital audio output terminal for coaxial cable or SPDIF optical digital audio output terminal on the rear of TV. 2 Select Digital Sound Output. (See page 40~41) 3 For more information, read the user’s guide of the external sound device.
How to Select TUNER MODE You can choose the RF-input between off-air and cable. CHANNEL Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press up or down button to move to “channel” Press or buttons to select “channel” Press up or down button to move to Tuner Mode Press or buttons to select Tuner Mode Press up or down button to move to Air / Cable and Press button to select item you want. Press MENU button after the setting is done, and Menu goes to the previous menu.
HYUNDAI LCD TV How to Store Channels Automatically - Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV. Press Menu button. Menu items appear on the screen. OK 2 OK Press Up or Down button to move to “channel”. Press or button to select “channel”.
How to Add/Erase Channels Manually CHANNEL Users can add or erase the desired channels. 29 1 Press channel buttons or the number buttons on remote control to view the channels that will be added or erased. 2 - To Add Channel Add the channel by pressing the ADD/ERASE button. 3 OK 4 OK Channel Added - To Delete Channel Press the ADD/ERASE button to erase the channel Press Left and Right buttons to set YES/NO . Press button to set.
HYUNDAI LCD TV How to Set Channel Edit and Favorite Channels Users can store frequently watched channels to quickly access a preferred channel. Press Menu button. Menu items appear on the screen. 2 OK 3 OK Press Up or Down button to move to “channel”. Press button or to select “channel”. CHANNEL 1 OK Press Up or Down button to move to “channel edit”. Press button or to select “channel edit”. Press button to “select”.
How to See Signal Strength The function is only for DTV channel. Press menu button. menu items appear on the screen. CHANNEL 1 2 OK OK Press Up or Down button to move to “channel” . Press or button to select “channel”. Press Up or Down button to move to “signal strength”. Press or button to select “signal strength” then the signal strength of anntena appears on the screen. Press Menu button after the setting is done.
HYUNDAI LCD TV How to Set The Input Mode Press Menu button. Menu items appear on the screen. 1 3 Press Up or Down button to move to “channel”. Press or button to select “channel”. OK Press Up or Down button to move to “external input” . Press or button to select “external input”. OK CHANNEL 2 OK Press left or right button to set input mode Whenever press left/right button to set input mode Changes in following order.
How to Select the Picture Mode Users can automatically adjust the picture mode according to the input mode. PICTURE Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to picture. Press or button to select picture. Press Up or Down button to move to picture mode Press or button to select Whenever you press Up or Down button, the mode changes in following order.
HYUNDAI LCD TV How to Set the Desired Picture Users can manually adjust their desired picture. Press Menu button. Menu items appear on the screen. 1 2 OK OK 4 OK 5 OK Press Up or Down button to move to picture. Press or button to select picture. Press Up or Down button to move to picture mode Press button or to select picture mode Press Up or Down buttom to move to custom and Press button to make a selection PICTURE 3 OK Press Up or Down buttom to move to Brightness .
How to Select the Aspect Ratio Users can manually adjust size of the screen. Press Aspect button. Menu items appear on the screen. Whenever you press Aspect button, the mode changes in following order. WIDE NORMAL ZOOM AUTO (This is applied in digital broadcasting input mode only.) The screen size automaticaly changes according to a signal source received (General broadcast 4:3, Wide broadcast 16:9) PICTURE WIDE General broadcast picture is adjusted to 16:9.
HYUNDAI LCD TV How to Select the Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to sound . Press or button to select sound . Press Up or Down button to move to sound mode Press or button to select sound mode. Mode is selected. Whenever you press Up or Down button, the mode changes in following order.
How to Adjust the Desired Audio Mode Users can adjust sound mode manually as they want. SOUND Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK 4 OK 5 OK Press Up or Down button to move to sound. Press or button to move to sound. Press Up or Down button to move to sound mode Press or to select. Press Up or Down button to move to custom. and press button to make a selection. Press Up or Down to select items.
HYUNDAI LCD TV How to Use the Automatic Volume Control With this Automatic Volume Level Control, everything you watch will always maintain the volume level that you decide. Basically it is set to “off” Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to sound . Press or button to select sound . Press Up or Down button to move to AVL. Press or button to select AVL. Press Press or button to set to on/off. button to set to on/off.
How to Listen to SRS TruSurround XT (Surround) Users can enjoy spectacular 3D sound. Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to sound. Press or button to select sound. Press Up or Down button to move to SRS. Press or button to select SRS. Press Left and Right buttons to set to OFF/Tresurround XT . SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear.
HYUNDAI LCD TV How to Set Audio Language While watching a digital program, you can listen to foreign language if the program is supported with foreign language. Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to sound . Press or button to select sound . Press Up or Down button to move to AUDIO LANGUAGE . Press or button to select AUDIO LANGUAGE . Whenever you press Left or Right button, the mode shifts in following order.
How to Set the Digital Audio Output The digital audio output terminal allows you to enjoy digital sound. (For more details, see page 24) Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to sound . Press or button to select sound. Press Up or Down button to move to “DIGITAL AUDIO OUT” Press or buttons to select Digital Audio out. Whenever you press Left or Right button, the mode shifts in following order.
HYUNDAI LCD TV How to Set Auto Lock This function is used to prevent from using the control buttons on the front top of the TV or from connecting external devices to the TV. You make sure to set a PIN number to use this function. Press Menu button. Menu items appear on the screen. 1 OK 2 OK Press Up or Down button to move to function . Press or button to select function . Press Up or Down buttons to move to “AUTO LOCK”. Press or button to select “AUTO LOCK”.
Continued from previous page..... (Set the Lock External Signal function.) 8 OK 9 OK 10 - To update DTV rating : Press Up or Down button to move to “DTV Rating”. Press button to select “DTV Rating”. - To set setup code : Press Up or Down button to select “SETUP CODE”. Press button to select “SETUP CODE” Then the Enter PIN number window appears. Enter a 4- digit PIN number.
HYUNDAI LCD TV How To Set Block By Rating This(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories.
...... Continued from previous page. Press Menu button. Menu items appear on the screen. 1 OK Enter your 4-digit PIN number. 2 3 Press Up or Down button to move to Auto Lock. Press or button to select Auto Lock. The message “Enter PIN” will appear. OK 4 OK 5 OK Press Up or Down button to move to “BLOCK BY RATING” and press buttons to make a selection. The new screen will appear.
HYUNDAI LCD TV How to View Closed Captions Choices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option. 1. CC MODE : ON : Captioning information is always shown, when available. OFF : No captioning information is displayed. 2. PRIORITY : You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either.
...... Continued from previous page. 3.
HYUNDAI LCD TV 5 OK 6 OK 7 OK 8 OK - To select caption option Press Up or Down button to move to caption option. Press or button to select caption option. Press left/right buttons to select Auto/Option and press to select make a selection. If caption option selected options, CC Background and caption Text are highlighted When selectiong the CC Background and caption text, press button.
How to Set the EPG View - This service is only for DTV Model. Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to function. or button to select function. Press Press Up or Down button to move to EPG View or button to select EPG View Press Press or button to see the EPG Then you can get information on the broadcastion time and program. FUNCTION Press MENU button after the setting is done, and Menu goes to the previous menu.
HYUNDAI LCD TV How to Set Date / Time - Yes can automatocally turn on or off the TV at a present time, To do this, you must set the time it you wish to use the automatic on or off timers Press Menu button. Menu item appear on the screen. 1 OK Press Up or Down button to move to setup or button to select setup Press 2 OK Press Up or Down button to move to “DATE/TIME” Press or button to select “DATE/TIME” 3 OK Press Up or Down button to move to manual manually.
How to Set Power on Time Press Menu button. Menu items appear on the screen. 1 2 3 OK Press Up or Down button to move to setup. Press or button to select setup. OK Press Up/Down button to select power on time Press or button to select power on time.
HYUNDAI LCD TV How to Set Power Off Time Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to setup Press or button to select setup. Press Up/Down button to move to power off time Press or button to select power off time. Press button to activate power off time whenever you press left and right button, the mode shift in following order OFF DAILY ONCE If you select once or daliy in the “ACTIVATE” You can set time.
How to Set Sleep Time Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup Press or button to select setup. 1 OK 2 OK Press Up or Down button to move to sleep time Press or button to set sleep time. OK Press up or down button to set sleep time whenever you press up or down button the mode shifts in following order OFF 15 MINUTES 30 MINUTES 60 MINUTES 90 MINUTES 120 MINUTES 3 4 Press button to set.
HYUNDAI LCD TV How to Choose Menu Language Users can select their language preference in order to display main menus and sub menus, etc. Press Menu button. Menu items appear on the screen. 1 2 3 OK Press Up or Down button to move to setup. Press or button to select setup. OK Press up/down button to move to menu language. Press or button to select menu language. OK Press or button to set language Whenever you press Left or Right button, the mode shifts in following order.
How to Set Menu Opacify Users can select their language preference in order to display main menus and sub menus, etc. Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to setup . Press or button to select setup Press Up or Down button to move to move to menu opacify Press or button to select menu opacifty Press left or right to set menu opacify you want. SETUP Press MENU button after the setting is done, and Menu goes to the previous menu.
HYUNDAI LCD TV How to Set Emergency Alert Press Menu button. Menu items appear on the screen. 1 OK 2 OK 3 OK Press Up or Down button to move to setup . Press or button to select setup Press Up or Down button to move to Energency Alert. Press or button to select Energency Alert. Press Up or Down button to move to Low/medium Press left or right button to select present/discard. Press MENU button after the setting is done, and Menu goes to the previous menu.
How to Set the Geometry in PC Mode This function is only available in PC mode. Press Menu button. Menu item appear on the screen. Press Up or Down button to move to setup. Press or button to select setup. 1 OK 2 OK 3 OK 4 OK Press Up and Down buttons to adjust V-position . Press or button to adjust H-position. After setting press button to exit 5 OK Press Up and Down buttons to move to “RESET” . Press or button to adjust H/V-position auto . Press Up or Down buttons to move to “PC”.
HYUNDAI LCD TV Glossary 1 Component video Component video is sent through three cables: two color shade (chrominance) signals and one brightness (luminance) signal. Component video achieves greater color accuracy than composite video or S-VIDEO by splitting chrominance into two separate portions. Composite video Composite video is sent through a single cable. Composite video combines the color shade (chrominance) and brightness (luminance) information into one video signal.
Glossary 2 DVD Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TV antenna. Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9 (widescreen) aspect ratio, as opposed to a 4:3 aspect ratio. Picture Mode Sound Mode Sound Mode features the optimal sound quality. There are Standard-News-MusicSports- Custom features in order.
HYUNDAI LCD TV Glossary 3 MTS A bilingual service provided when an overseas film, foreign drama or overseas news, etc. is aired. You can select one of two choices: mother tongue and foreign language. Or you can listen to both languages at the same time. DVI Digital Visual Interface is a specification for digital signals. This interface using TMDS transmission reduces the loss of signal, allowing to enjoy a clear and crisp image.
Troubleshooting Installation Problems Symptom Possible solution How can I install an antenna? Refer to page 16. TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter). Picture Problems Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on.
HYUNDAI LCD TV Auto On does not work. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. After setting the time, I turned TV off and turn it on. The programmed information has been erased. Ensure to use the remote control or power button on the product to turn off your TV.
Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of LCD with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth. Never use any solvent on the screen such as Acetone, Benzene, or Thinner, etc.
HYUNDAI LCD TV Product Specifications - E260D/E320D/E370D E260D E320D E370D S-Video 1EA (A/V audio common) 1EA (A/V audio common) 1EA (A/V audio common) Video (RCA) 1EA (Audio included) 1EA (Audio included) 1EA (Audio included) Component(Y/Cb/Cr) 2EA (Audio included) 2EA (Audio included) 2EA (Audio included) Antenna 1EA 1EA 1EA PC Connection jack D-SUB D-SUB D-SUB Max.
Product Specifications - E261D/E321D/E371D E261D E321D E371D S-Video 1EA (A/V audio common) 1EA (A/V audio common) 1EA (A/V audio common) Video (RCA) 1EA (Audio included) 1EA (Audio included) 1EA (Audio included) Component(Y/Cb/Cr) 2EA (Audio included) 2EA (Audio included) 2EA (Audio included) Antenna 1EA 1EA 1EA PC Connection jack D-SUB D-SUB D-SUB Max.
HYUNDAI LCD TV APPENDIX
