Owner's Manual

933
Maintenance
Wheel replacement
When replacing the metal wheels for any
reason, make sure the new wheels are
equivalent to the original factory units in
diameter, rim width and offset.
Tyre traction
Tyre traction can be reduced if you drive
on worn tyres, tyres that are improperly
inflated or on slippery road surfaces.
Tyres should be replaced when tread
wear indicators appear. To reduce the
possibility of losing control, slow down
whenever there is rain, snow or ice on
the road.
Tyre maintenance
In addition to proper inflation, correct
wheel alignment helps decrease tyre
wear. If you find a tyre is worn unevenly,
have your dealer check the wheel
alignment.
When you have new tyres installed,
make sure they are balanced. This will
increase vehicle ride comfort and tyre
life. Additionally, a tyre should always be
rebalanced if it is removed from the
wheel.
Tyre sidewall labeling
This information identifies and describes
the fundamental characteristics of the
tyre and also provides the tyre
identification number (TIN) for safety
standard certification. The TIN can be
used to identify the tyre in case of a
recall.
1. Manufacturer or brand name
Manufacturer or Brand name is shown.
WARNING
A wheel that is not the
correct size may adversely affect
wheel and bearing life, braking and
stopping abilities, handling
characteristics, ground clearance,
body-to-tyre clearance, snow chain
clearance, speedometer and
odometer calibration, headlight aim
and bumper height.
I030B04JM
1
1
2
3
4
5,6
7