Owner's Manual

Maintenance
569
5. Pull out the bulb module from the high
mounted stop light assembly by
pressing in the clips (2).
6. Replace the bulbs by pulling it out.
7. Reinstall in the reverse order.
License plate light bulb
replacement
1. Using a flat-blade screwdriver, remove
the light assembly from the body of the
vehicle by prying the lens and pulling
the assembly out.
2. Separate the socket and the lens part
by turning the socket
counterclockwise until the tabs on the
socket align with the slots on the lens
part.
3. Remove the bulb by pulling it straight
out.
4. Insert a new bulb in the socket.
5. Reassemble the socket and the lens
part.
6. Reinstall the light assembly to the
body of the vehicle.
OHA071038OHA071036 OHA071037