H-CMD4002 MULTIMEDIA DVD/CD/MP3 RECEIVER WITH BUILT-IN 3.5 TFT DISPLAY Instruction manual DVD/CD/MP3 3.
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ...............................................................................................................................................2 Important safeguards ................................................................................
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating.
Installation/ connection First complete the electrical connections, and then check them for correctness. Installation opening This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be 4.75 5.56 mm thick in order to be able to support the unit. 1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver. Make sure that lock lever is flush with the mounting collar (not projecting outward). 2. Secure the rear of the unit.
Detachable control panel Detaching the control panel Turn the Power off. Press OPEN button to flip down the panel. Gently press the right side of the panel. Pull the panel out (see the picture 1). Attaching the control panel Insert the right side of the control panel into the main unit. Press the control panel left side until the click sound is heard. Pic. 1 Caution: DO NOT insert the control panel from the left side. It can damage the control panel. The control panel can easily be damaged by shocks.
Electrical connection 1. 2. 3. 4. 5.
Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. 3.
Panel controls Front panel 1. 2. 3. 4. 5. OPEN button PTY/MUT button Press it to activate the PTY function. Press PTY button for 2 seconds to choose LOCAL, press it again for 2 seconds to switch to DX. When the power is on press it to cut down the volume output, press it again to resume volume. LOU/TA button Press and hold for 2 seconds to turn TA (traffic announcement) function ON or OFF. Press it to activate loudness. EQ button Press it to choose equalizer mode.
6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Press it to activate the Radio Auto preset function. R/L/ST / AF button Press it to switch the DVD and VCD audio channel (L/R/ST). Press it to select AF (alternative frequency) function ON or OFF. MODE button POWER button Press POWER button to turn the power on, press and hold for 2 seconds to turn the power off. BAND button Press it repeatedly to select your desired radio band during RADIO mode.
Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. MODE button POWER button BND/TA/SYS button Directional buttons for menu selection ENTER button STOP/REVERSE button AMS/RPT button ST/PROG button LOC/AF RDM button VOL +/- button PBC button OSD (On Screen Display) button Digit area PLAY/PAUSE button MUTE button TITLE button (for DVD only) SUB.
24. AUDIO button 25. GOTO button Changing the battery 1. 2. Press the catch and at the same time pull out the battery tray. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
Back of the front panel Press the OPEN button on the front panel to flip it down. 1. 2. 3. 4. RESET button EJECT button Panel status indicator Disc slot Note: Pressing the RESET button will erase the clock setting and stored stations. Panel status indicator lights up when you slide the panel down; flashes when you remove the panel.
General operation Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button on the panel to open the panel and press the RESET button to restore the unit to the original factory settings. Power button Press POWER button on the unit or on the RC to turn the unit on. Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status which you set.
Press the VOL 3 times, then rotate to adjust the treble level. - BALANCE control Press the VOL 4 times, then rotate to adjust the balance level. - FADER control Press the VOL 5 times, then rotate to adjust the fader level. - BRIGHTNESS control Press the VOL 6 times, then rotate to adjust the brightness level. - CONTRAST control Press the VOL 7 times, then rotate to adjust the contrast level. - COLOR control Press the VOL 8 times, then rotate to adjust the color level.
Mode control Press this button to select Radio (TUNER), DVD/VCD/CD/MP3 (S-CDP) & USB (USB-DRIV) mode. Press MODE button on the RC to switch to radio mode or playback mode. Equalizer setting Press EQ button to select EQ mode: POP, ROCK, CLASSIC, Off. Loudness setting Press LOU/TA button to increase the low frequency. This can improve the sensitivity for your ears. Press it again to shut down the LOU function.
Digital tuner Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press MODE button to select Radio mode. Press BAND button on the front panel or BND/TA/SYS on the RC once or more to select: FM1, FM2, FM3, FM (OIRT), MW1, MW2. Display will show the wave band, frequency and preset station number if already stored.
AMS (Auto Memory Store) function Preset scan: press AMS button on the front panel or AMS/RPT on the RC to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. The memory location indicator on the LCD will flash during the process. To stop preset scan, press this button again. Auto memory store: press AMS button on the front panel or AMS/RPT on the RC for more than 2 seconds to enter auto store mode.
PTY (Program Type) 1. 2. 3. 4. Press PTY/MUT button to activate the PTY function. The previous PTY type is shown. Press PTY once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1 - 6 to select the desired program type (see the following table). When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. If there are no keys entered for 2 seconds, previously selected PTY is searched.
TV operations TV tuning At first, press MODE button to switch the set to TV mode, then press AMS/RPT to auto-scan TV station from low frequency to high frequency and TV station will be automatically stored in to memory. When Auto-Tuning is done, you can use the remote control 0-9 key to select your desired station. For TV Tuning in SECAM please kindly pay attention as per follows: Press the MODE button and then press the R/L button to switch to PAL DK audio system.
USB/SD/MMC notes: USB functions (flash memory type) MP3 music play. 1. SD/ MMC card support. 2. USB flash memory 2in1 (SD/ MMC) support. 3. FAT 16/ FAT 32 is possible - FAT 16 (dir: 200 support, file:500 support), - FAT 32 (dir: 200 support, file:500 support). 4. Filename: 32 byte/ Dir name: 32byte. 5. Tag (id3tag ver2.0) - Title/ Artist/ Album: 32 byte support. 6. Multi card reader not support. 7. USB 1.1, 2.0 support. Note: USB format supports 1.1, 2.0. Capacity: 8 MB ~ 1 GB.
Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc.
Disc operations Discs for playback This unit can play all digital audio CD, DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/ Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg) ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters Max. Track number is 448 Max. nested directory is 8 levels The max. album number is 99 The max.
Playing/ pausing To ensure good system performance, wait until the unit finishes reading the disc information before proceeding. Press the PLAY/ PAUSE button on the front panel or RC to start/ pause the playback. In pause mode press it again to resume the playback. STOP Press button to suspend playback. Press it again the stop playback. Press PLAY/PAUSE to resume playback. Playing the previous/ next track 1. 2. 3. During playback press the 9 button to start playback of the previous track.
Random playback (for CD/VCD/MP3 discs) During disc playback, press the RDM button to start random playback of the disc. Press again to cancel. Intro playback (for CD/VCD discs) You can play the beginning of every track for 10 seconds in sequence. Press the INT button on the front panel to start intro play of whole disc. Press again to cancel. GOTO function You can go to the desired track/ chapter or time point directly. 1. During the disc playback press the GOTO button on the RC.
System switch In TV mode press BND/TA/SYS button to switch PAL/SECAM/NTSC system. In play mode press BND/TA/SYS button to switch AUTO/PAL/PAL60/NTSC system Programming the playback 1. 2. 3. 4. 5. Press PBC button, then press ST/PROG button, it displays P00:00. Use digit buttons to enter the number of the desired track to be on selected position. For VCD and CD, select track number. Press PLAY/ PAUSE button to play, or move the cursor to select PLAY and press ENTER to play.
Using the TITLE (for DVD only) 1. 2. 3. Press TITLE to display title or chapter list. Press , , , buttons or digital buttons to make a selection. Press ENTER. The player will start playing the selected title. Changing angle (for DVD only) If DVD discs support multi-angle playback, press ANGLE button to playback images in different camera angles. If discs doesn't support multi-angle playback, this function will not work. If no operation within 1 second, angle description will disappear.
MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write. The unit can not read an MP3 file that has a file extension other than .mp3 . If you play a non- MP3 file that has the .mp3 extension, you may hear some noise.
Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate o f 128 kbps. DO NOT store more than 448 MP3 files per disc. For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder). When CD-R disc is used, playback is possible only for discs, which have been finalized.
DVD setup Press SETUP button on the remote control to display DVD setup screen. Use the cursor buttons to select the desired setup menu: System setup, Language setup, Audio setup, Video setup, Digital setup. Press ENTER button to enter it. Use the cursor buttons to select the desired setting. Press ENTER button to enter it. Use the cursor buttons to select the desired setting adjustment. Press ENTER button to confirm. To exit the settings list select EXIT SETUP and press ENTER.
Setting Video output You can select video output: INTERLACE-YUV, TV RGB, P-SCAN YPBPR, S-VIDEO. Setting TV type 4: 3PS (pan scan): It is adapted to the TV with common size. The left and right edge of the picture will be cut off and project the picture to the whole screen, when play the wide screen picture. 4: 3LB (letter box): Please select it for the TV with common size. There will be black frame on the front and bottom side of the TV screen when play the wide screen picture.
Language setup LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG EXIT SETUP Setting OSD Language Press the cursor button and the ENTER button to select the desired language: English, Chinese, German, Spanish, French, Portuguese, Russian. Setting Audio Language Select a kind of language for the DVD disc audio from the languages which are contained in the DVD disc: Chinese, English, Japan, French, Spanish, Portuguese, Latin, German.
Audio setup AUDIO SETUP AUDIO OUT KEY EXIT SETUP Audio Output Select the digital output format. SPDIF/OFF: There is no signal output from the coaxial or optical output end. SPDIF/RAW: When the unit is connected with the amplifier by coaxial or optical connecter, please select this mode. SPDIF/PCM: When the unit is connected with the two channels digital stereo amplifier, please select this mode. Key Select the KEY and adjust the size.
Video setup VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS EXIT SETUP Setting Brightness Set the brightness of the video output with UP/DOWN buttons. Setting Contrast Set the contrast of the video output with UP/DOWN buttons. Setting hue Set the hue of the video output with UP/DOWN buttons. Setting Saturation Set the saturation of the video output with UP/DOWN buttons. Setting Sharpness Set the sharpness of the video output with UP/DOWN buttons.
Digital setup DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO EXIT SETUP Output Mode Select the output mode: LINE OUT: Compress the input signal. The volume is small. RF REMOD: The volume is large. Dynamic Range When you select the compressed mode as line out , select it to adjust the compression proportion and get the different compressed effect: FULL, 6/8, 4/8, 2/8. When select FULL, the audio signal is minimum; when select OFF, the audio signal is maximum.
Anti-theft system Remove the panel 1. 2. 3. 4. 5. Press the POWER button to turn the power off. Press OPEN button to flip down the panel. Gently press the right side of the panel. Pull the panel out. Place the panel into the case and take it with you when you leave the car. Remove the unit 1. 2. 3. Remove the panel and the trim plate. Insert both T-Keys into hole on the front of the set until they lock. Pull out the unit.
Handling discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
Troubleshooting guide Symptom Cause Solution General No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to ACC . Replace the fuse. Disc Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the player then put a new upward. Disc cannot be read. Inserting the disc in upside down. Compact disc is extremely dirty or defective. Temperature inside the car is too high.
Specification General Power supply: Current consumption: Maximum power output: Compatible formats: 12 V DC max. 10 A 50 W x 4 channels DVD/SVCD/VCD/HDCD/MP3/MP4/DivX/MPEG4/WMA/CDDA/Picture -CD/JPEG/CD-R/ -RW/DVD±R/±RW playback Dimensions (L x W x H) / weight: 178 x 166 x 50 mm / 2.2 kg Working temperature range: -10º - +60º ESP function: 40 sec. for Audio CD, 120 sec. for MP3 TFT display Screen size: Resolution: Aspect ratio: Contrast ratio: Brightness: 3.
Audio specification Maximum output: Frequency response: S/N ratio(A-vtd): 2 Vrms (+/- 3 dB) 20 Hz - 20 KHz 85 dB Separation 80 dB DSP sound effect: Classic, Rock, Pop, Flat Line out Output: CD max 2000 mV TV TV bands Color system Sound system Resolution Sensitivity VL, VH, VHF PAL/SECAM BG/DK/I 480 x 234 65 dB Specifications are subject to change without notice. Mass and dimension are approximate.
! . , , . ....................................................................................................................................................40 ...............................................................................................................................41 / ...............................................................................................................................42 ......................................................................................
-10º . ! , , . . . , , . . , , . , . , , . , , , . . , , . , , , , , . . , . , . . , . . .
/ , 4,75 5,56 . . , 1. . , ( ). 2. . . 3. . , , , . : . CD/MP3 . 42 .
. OPEN, . . ( 1. .1 . 1). , , . 2. 3. , , . . , . : . . : , . . . , , . : , , 43 . .
1. 2. 3. 4. 5.
: !!! , ( . ), . ISO 1. ISO, . , 2. ISO , . 3. , .
1. 2. OPEN PTY/MUT , 2 . , DX. LOCAL, , , . , . 3. LOU/TA 2 , ). .
4. 5. 6. EQ. AMS. RL/ST/AF , . AMS. , ( , , ). AF ( , 7. 8. ). MODE. POWER. , , 9. 10. 11. . . B ND. B ND . RADIO. 9/: / / . 12. VOL , , , 13. 14. 15. 16. . . [1-6] RPT. INT ( . 10 ) Intro. , . 17. 18. RDM. PLAY/PAUSE 10 , . , . .
1. 2. 3. MODE. POWER. BAND/TA/SYS: RADIO. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. ENTER. STOP/REVERSE. AMS/RPT. ST/PROG. LOC/AF/RDM. VOL+/-. . OSD. . PLAY/PAUSE. MUTE. TITLE ( DVD ). 17. SUB.T ( DVD 18. 19. 20. ). ANGLE ( SETUP. DVD ). SLOW.
21. 22. 23. 24. 25. ZOOM ( DVD/VCD SEL - ). . , , 9/:. AUDIO. GOTO. : 1. , 2. (CR 2025 3V), 3. . . . : . , . ( 6 ). . .
OPEN 1. 2. 3. 4. EJECT . RESET EJECT : RESET . , , .
OPEN. . . RESET, : , , POWER, : . . , , . VOL + , . VOL , . : VOL/BASS/TREBLE/BALANCE/FADER/BRIGHTNESS/CONTRAST/COLOR/SHARP/HUE. VOL , ( DSP) 51 .
- VOL 2 ( VOL 3 , , VOL 4 , . DSP) . . VOL 5 , VOL 6 , VOL 7 , VOL 8 , VOL 9 , . . . . . VOL 10 SEL P-EQ SHAR , : VOL BAS TRE FAD SEL . BAL. : BRI CON COL : . . 3 , .
, MUTE , PTY/MU . , MODE, (S-CDP) & USB (USB-DRIV). MODE . : , DVD/VCD/CD/MP3 . EQ : POP, ROCK, CLASSIC, LOU/TA . . . R/L/ST/AF ST/PROG R/L/ST/AF . . 53 .
: RDS RDS ( ) . . , MODE, - RADIO. BND/TA/SYS B ND : FM1, FM2, FM3, FM , , (OIRT), MW1, MW2. , , . / : 9 . :, , . . : 9 2 : , . , . , , . . . 30 (18 FM, 12 AM). : - ( ). 9/:. 1~6, .
: ( - ). 1~6. : 9/:, . : AMS/RPT . AMS , 5 . , AMS. : AMS/RPT 2 AMS ,6 1~6. , AMS. AF ( ) , , . . 1. R/L/ST/AF LOC/AF/RDM AF RDS AF. , AF . , . 2. RDS , ON ( .) 55 AF. , .
TA ( ) 2 BND/TA/SYS LOU/ A , . . . (TA-VOL). , , TA . AMS PTY ( FM1. SEEK, SCAN, . ) , RDS, PTY/MUT, . PTY. . 2. PTY , . : 6 . 3. : PTY . , . 2 , . NO PTY, , , NO PTY 4. . PTY , PTY.
MODE , AMS/RPT . . . : SECAM. BND, , SECAM. ST/LR PAL DK, AMS. , .
SD/ MMC/ USB SD/ MMC/ USB 1. 2. 3. . OPEN SD/MMC , USB . . . . : , 58 SD/MMC.
1. 2. 3. 1. 2. USB/ SD/ MMC : MP3 USB ( SD/ MMC. USB 2 1 (SD/ MMC). FAT 16/ FAT 32 - FAT 16 ( 200 , 500 ), - FAT 32 ( 200 , 500 ). : 32 / : 32 . (id3tag ver 2.0) / / : 32 6. 7. ). . . USB 1.1, 2.0. : USB: USB 1.1, 2.0. :8M ~1 . SD: SD : Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, . . :8M ~1 . MMC: MMC : Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, . : 16 M ~ 1 .
PBC ( ) , . , PBC, . . DVD. , 1, . , 2 , 3. . , . . . . , .
CD,DVD/SVCD/VCD/HDCD/MP3/ MP4/WMA/CDDA/Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW. : : MP3 (*.mp3) WMA (*.wma) : MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) : JPEG (*.jpg) ISO 9660 ISO 9660 + Joliet 30 . 448. -8 . 99. - 99 59 . MP3 : 8 48 ( 44,1 ). P3 : 32 - 320 ( 128 ). : *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, DRM. .
1. 2. 3. 4. . OPEN , . . EJECT, . / , , , PLAY/PAUSE, . PLAY/PAUSE . , , . . . PLAY/PAUSE . 1. 9, . 2. 3. . :, 1-9, 0, 10+ . 9 : : 2, 4, 8, 20. .
: , , . R : : RPT ONE ( RPT CHAP ( VCD/CD/MP3 DVD : ). AMS/RPT , . ) => RPT OFF ( ) => RPT TITL ( ). ) => RPT ALL RPT. ( CD/VCD/MP3) RDM, . , Intro ( . CD/VCD) 10 . INT, , . . GOTO , , . 1. => 2. . GOTO, . .
3. ENTER, . PBC ( )( VCD VCD ) PBC, 1- . 1. , . 2. , . 9/: 3. 4. 5. , PLAY/ PAUSE, STOP , . , VCD. . , , PLAY/PAUSE , . . BND/TA/SYS BND/TA/SYS 1. 2. ENTER PBC, ST/PROG, PAL/SECAM/NTSC. AUTO/PAL/PAL60/NTSC. 00:00. , . VCD CD .
3. PLAY/ PAUSE 4. 5. «PLAY» . , ST/PROG, DVD ENTER, «CLEAR» ENTER. . : R/L/ST/AF , ( AUDIO , ). VCD : R/L/ST/AF R :L , STEREO ( ( ). DVD ) . SUB.T . , . 5 , . OSD. . , ( 1. 2. 3. DVD ) TITLE, . , , , ENTER. / 65 . .
( DVD ) DVD- , ANGLE . , . , 1 . ZOOM. : . 1. VCD, CD . GOTO , --:--. . 2. DVD ENTER 3. DVD GOTO DVD GOTO , . , DVD . 1. 2. DVD, VCD ½, 1/3, ¼, 1/5, 1/6, 1/7, PLAY/PAUSE SLOW : . .
3 3: 3 MPEG 3 . 3 CD-ROM, CD-R 3, , 3, CD-RW. ISO 9660. . 3, , .mp3 . 3 , .mp3 , . , MP3 PC , . 8, . 448. . , 8 , VBR, , . VBR: . 67 3.
CD-R MP3: CD-RW, 3 44,1 128 448 , 3 ISO 9660, 8, . . ( ). CD-R . , , MP3 CD-R CD-RW , . 3 3 , CD-R , 3. CD-RW . . CD-R CD-RW 16 , . . 1. ID3TAG. , .
DVD SETUP, . , : , , / / , , . , . ENTER, ENTER, . . ENTER. . NTSC, PAL, PAL60, 69 .
, , ( ). : INTERLACE-YUV, TV RGB, P-SCAN YPBPR, S-VIDEO. 4: 3PS (pan scan): . , . 4: 3LB (letter box): . . 16:9 (wide screen): . « ». . , «0000» ( . ENTER, . ).
, . 1 1 8 - 8: . . 8. ( , ENTER , , , DVD, , ). : , . , , , : , , 71 , .
, , DVD, , , , , DVD- , , , , , , : , , : , , . . : : SPDIF/RAW: . , . SPDIF/PCM: . , UP/DOWN .
. . . . .
. : LINE OUT: RF REMOD: . . . line out , , : FULL, 6/8, 4/8, 2/8. , Off , . Full , . : STEREO, MONO L, MONO R , MIX MONO. STOP. REGION. : 0( PLAY/PAUSE : : ), ENTER. .
1. 2. 3. 4. 5. , POWER. . OPEN, . . , 1. 2. 3. . . , . . , ( ). , . , . , , . ( ).
. , , . , . , . . ( , ), , . . , , , , . . , . .
. , . . . . , . . . . . . , . . . . . RESET. . . 30 . . , 30 . . . . . . . .
: : 12 10 : 50 4 DVD/SVCD/VCD/HDCD/MP3/MP4/DivX/MPEG4/WMA/CDDA/Pictur e-CD/JPEG/CD-R/ -RW/DVD±R/±RW 178 166 50 -10º - +60º 40 CD, 120 3 : ( ): : ESP : 3,5 480 234 dpi 4:3 300 350 2 : : : : FM : : 65.0 6 18 74.0 / 87.5 MW : 522-1620 12 78 108.
2 RMS (+/-3 ) : : (A-vtd): DSP 20 20 85 80 Classic, Rock, Pop, Flat CD . 2000 VL, VH, VHF PAL/SECAM BG/DK/I 480x234 65 . .
