H-MS1100 INSTRUCTION MANUAL
Table of Contents Before Connection ................................................................................................................... 2 For your safety ......................................................................................................................................... 2 Precautions .............................................................................................................................................. 2 Control Section ............................
Before Connection Thank you for purchasing this DVD 5.1 channel component system, in order to fully utilize this system, please read this instruction book carefully before use it. For your safety Precautions 1. Before operating this system, check the voltage of this system to see if it is identical with the voltage of your local power supply. 2. Unplug the system from the wall outlet if it is not used for a long time. To disconnect the cord, pull it out by grasping the plug 3.
Control Section The unit 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Remote control 1. Standby Button 2. DVD Function Button Interlace/P-SCAM Switch Button 3. TUNER Function Button Band Switch 4. Clock Button 5. Sleep Button Timer Button 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39.
Connection Caution: Please turn off all the equipment power before connecting. Connect to the TV Connecting diagram Terminal board for the player TV Terminal board for the TV Safety precautions * * * Some setting should be done for the unit according to the TV connection. According to the color system setting of TV, select the color system in the TV Display function setting. If the unit is connected to wide screen TV, then set TV display to Wide in the function setting item.
Connect to 5.1 channel surround sound speaker boxes Connecting diagram Terminal board for the player Front left speaker box TV Front right speaker box Center speaker box Woofer speaker box Left surround speaker box Right surround speaker box Connection precautions 1.
Connect to AM antenna AM loop antenna a. Open the AM antenna terminals on the rear of the unit. b. Attach the AM loop to its base by snapping the tabs on the loop into the slot in the base. c. Close each of the terminals to connect the antenna securely. Rotate AM ring shape antenna till the receiving effect is the best. (Dont place the AM ring shape antenna on the unit cover, or it will affect the receiving effect.
Connect to the amplifier with digital signal input terminal Connecting diagram Terminal board for the player With digital signal input terminals DTS, Dolby Digital signal decode amplifier terminal board With digital signal input terminals DTS, Dolby Digital signal decode amplifier Connection precautions Use optical fibre, coaxial signal wire to connect optical fibre, coaxial output jack of the unit with optical fibre, coaxial input jack of other amplifier, then you can feel the super digital sound ef
Installation of Batteries in the Remote Control 1. Remove the battery compartment cover. 2. Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity diagrams in the battery compartment. * About half a year of normal operation can be expected when using the general batteries. * When the batteries are exhausted, the commander can no longer operate the system. Replace both batteries at the same time with new ones. * Dont use an old battery with a new one.
When playing disc, press the stop/return button (L ) to stop playing, the unit will store the last playing time in the memory automatically, then press the play/pause button (B F), the unit will resume to last memory time and continue playback automatically. If you press the stop/return button (L ) twice to stop the disc playing. (You can also operate the key L on the panel of unit.) Press the volume down button to decrease the volume. Press the volume up button to increase the volume.
Load a general disc, upon finishing reading the disc in PBC OFF mode, you can select tracks or chapters by number buttons (0/10,1-9,10+) and play. * If the track or chapter number is less than 10, press the number buttons 0/10,1-9. * If the track or chapter number is over 10, press 10+ button and press the one of the number buttons 0/10,1-9. (Note: If the track or chapter number over 20, press 10+ button twice and press the one of the number buttons 0/10,1-9.
In the disc normal playing mode, press the title button (TITLE), this system will stop playing and enter the display mode of title menu. You can use channel function when you playing the general disc, you can choose MONO (Mono Left, Mono Right), STEREO or Mix-Mono audio output by pressing vocal mode select button (AUDIO). l When playing DVD disc recorded with several languages, you can repeatedly press the language select button (AUDIO) to select one of language to play.
Press the fast reverse button (D ) once by once to select one of the variety different speed to fast backward play or select normal speed to play. Each time you press the button, the screen shows orderly. 2X 4X 8X 16X 32X PLAY Note: Press the B F button to resume normal playback. (You can also operate the key D on the panel of unit.) When playing DVD disc, press the next button (G ) to skip the next chapter or title. l When playing general disc, press the next button (G ) to skip the next track.
Note: When playback the picture CD, press the L button to enter the Thumbnail Mode, use the , , , buttons to move the cursor to illuminate the MENU then press the ENTER button to enter the Remote Key Function list. PROGRAM STOP G H PLAY : : : : : : : Transition Effect Thumbnail Mode Next Picture Previous Picture Picture Mode Invert Mirror ZOOM C D , , , : : : Contrarotate Rotate Clockwise Switch Zoom Mode : Zoom In : Zoom Out : PAN IN Zoom Mode 4.
Setting the Clock The built-in clock shows the correct time in the display. - In standby mode, press the clock button (CLOCK) twice, hour indicator will blink. - Set the hour with the TU- button or TU+ button. - Press the clock button (CLOCK), minute indicator will blink. - Set the minute with the TU- button or TU+ button. - Press the clock button (CLOCK), the built-in clock starts operating and the seconds start counting from 0. Note: * You can set the clock in standby mode.
- Play a disc or tune in to the desired station. - If you set the sleep timer first, each time you press the sleep button (SLEEP), it changes the number of minutes shown on the VFD in this sequence: -- 10 20 ... 80 90 00 If you change the sleep timer, each time you press the sleep button (SLEEP), it changes the number of minutes shown on the VFD in this sequence: -- 15 10 20 ...
Audio Setup Page Speaker Setup l Downmix When the disc has Dodly Pro Logic stereo, you can choose LT/RT or Stereo or V.SURR or Off mode to play this disc. l Front Speaker, Center Speaker, Rear Speaker, Subwoofer You can set up this speaker or speakers volume. l Test Tone When setup this function, the screen will display and test channel on the left down cape. l Dialog You can adjust dialogue volume.
Video Setup Page Preference Page Password Setup Page Component You can setup this according to TV video output type. TV Mode When YUV or RGB video output type is selected, you can select DVD Interlace or P-SCAN output mode (please first confirm your TV has P-SCAN function and seted to that function). Quality You can according to the color of picture ,adjust it to be light or dark. Audio, Subtitle, Disc Menu When disc has subtitle, audio, disc menu support. Playing type was default.
Protect the Disc 1. To keep the disc clean, please dont touch the discs surface when you are holding it. You should hold the edge. 2. If the disc is dirty, it will affect the sound quality. Please use the clean and soft cloth to wipe the disc from inside to outside. Dont wipe the disc at circumference direction. 3. Dont stick paper on the disc. 4. Dont place discs in direct sunlight or near or on heat sources. 5. After you have finished with the disc, please place it back in its original case.
Specification System Power supply ............................................................. ~230V / 50 Hz Rated working power consumption ............................ ≤ 130W AUX input sensitivity .................................................. ≤ 350mV Channel ...................................................................... ≥ 40dB Distortion .................................................................... ≤ 0.7% Dimensions ................................................................
Woofer Impedance ............................................................ 8Ω Input power ........................................................... 50W Sensitivity ............................................................. 86 ± 3dB Frequency response ............................................ 40Hz-300Hz Dimensions .......................................................... 160(W) x 317(H) x 392(D) mm Remote Distance ..................................................................... 6m Angle .
