Shop Manual

20-10
Major Parameters
Item Description Remark
A
Height to Top of Non-ROPS Cabin
Height to Top of ROPS Frame
B Center of Front Axle to counterweight
C Ground Clearance to Center Front Axle
D Length of Front Axle to Moldboard
E Length of Front Axle to Mid Tandem
F Length of Front Tire to Rear of Machine
G Length of Between Tandem Axles
H Length of Between Counterweight to Ripper
J Width of Tire Center Lines
K Width of Outside Tires
L Width of Moldboard
M Height to Exhaust Stack
N Height to Top of Cylinders
O Ground Clearance to Trans. Case
A
O
N
C
B
D G
E
F
H
M
J
K
L
MAJOR PARAMETERS
Contents
Engine
model
Rated power
Max torque
Power Train
Transmission Power shift (ZF Technology), 6 Forward / 3Reverse Gears
Max speed 49.2/30.0 km/h
Service brake Foot operated, hydraulically actuated on four tandem wheels
Parking brake flexible shaft control actuated inner-expanding drum brake
Hydraulic
Pump flow 99 L/min
Max system pressure 17.5 Mpa
Moldboard
Moldboard Dimension
Arc radius 329 mm
Cutting edge (width/thickness) 152 / 16 mm
Blade Range
Circle center shift (right/left) 525 / 530 mm
Moldboard side shift (right/left)
Max shoulder reach outside tires (right/left)
Max lift above ground 450 mm
Operating Spec.
Turning radius 7.3 m
Steering range Left / Right 49°
Articulation angle Left / Right 26°
Operation Weight (Ton)
142kW (190 hp)
860Nm/1,400rpm
Cummins 6CTA8.3-C190
4,268 x 580 x 18 mm
965 / 965 mm
2,341 / 2,346 mm
15.6
HG190
HG190
3,420 mm
3,604 mm
963 mm
714 mm
2,600 mm
6,100 mm
8,353 mm
1,535 mm
8,353 mm
2,120 mm
2,565 mm
4,268 mm
2,846 mm
2,908 mm
339 mm