Shop Manual

20-91
Check Parking Brake Operation Rod
Special Tools
Serial No. Part Number Part Description Quantity
A
Common Use Tools
Tape 1
B Pressure Meter 1
Travel Inspection
Measure with tape the travel distance from
top to bottom of parking operation rod.
Travel Adjustment
▲ The engine should be stopped when
conduct adjustment.
1. Insert the screwdriver into the adjusting
hole of brake drum and rotate the
adjusting gear as per the arrow direction
until the lining is contact closely with
brake drum, then return to the clearance
between the adjusting lining and brake
drum.
2. After the clearance between lining and
brake drum has been adjusted, pull the
operation rod and adjust the soft shaft and
make its travel at the ratchet wheel is
within 2-3 teeth.
3. After adjusted, the machine can park on
the gradient of 15% and will not slid.
Operation Force Inspection
Inspect with pressure meter B the operation
force.