User's Manual

-24-
 End key
 Press it to end a call being dialed or end an ongoing call; or
press it to exit the menu and return to the standby state. You
can hold it for two or three seconds can power on/off the
mobile phone
 Direction key
Press them to scroll the options when browsing a function list. In
edit state, press direction keys to navigate.
 OK key
Press it to confirm a selection.
 FM radio shortcut key
In idle screen, press it can access FM radio interface.
 Audio player shortcut key
In idle screen, press it can access audio player interface.
 Number keys, * key and # key
Press number keys 0 through 9 to input or edit state to input
numbers and characters;
The # key and the * key represent different functions in different
states or different function menus.
Hold the # key up to 2s in standby state to switch in the general
mode and meeting mode .
Press the # key in edit state to switch between input methods.
Pressing the * key in edit status to select a symbol.
Press two times the * key to input "+" in standby interface. When
the symbol "+" appears,
Press the * key quickly to input "P" or "W","P" and "W" are used for
calling the extension; "+" are used for dialing an international call.
3 Getting started
3.1 Installing the SIM Cards and the Battery
An SIM card carries useful information, including your mobile
phone number, PIN (Personal Identification Number), PUK (PIN
Unlocking Key), IMSI (International Mobile Subscriber Identity),
network information, contacts data, and short messages data.
Note:
After powering off your mobile phone, wait for a few seconds
before removing or inserting an SIM card.
Exercise caution when operating an SIM card, as friction or
bending will damage the SIM card.
Properly keep the mobile phone and its fittings such as the SIM