User's Manual

-28-
 During the charging, ensure the battery is placed in a room
temperature environment or in an environment close to room
temperature.
 Immediately stop using the battery if the battery produces
odor, overheats, cracks, distorts or has other damage, or if the
electrolyte leaks.
 The battery wears out with use. A longer charging time is
required as the battery is put into use for a long time. If the
total conversation duration decreases but the charging time
increases even though the battery is properly charged,
purchase a standard battery from the OEM or use a battery
approved by our company. Using any poor-quality fittings will
cause harm to your mobile phone or even incur danger!
Note: To guarantee your personal safety and protect the
environment, do not litter the battery! Return the old battery to the
mobile phone manufacturer or place it in specified battery
reclamation areas. Do not litter any battery with other rubbish.
Warning: Short-circuits of the battery may cause explosion, fire,
personal injury or other severe consequences!
3.4 Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A
power-on animation appears on the display screen.
Input the phone lock code and press the OK key if the mobile
phone prompts you to input the phone lock code. The original code
is 0000
Input the PIN and press the OK key if the mobile phone prompts
you to input the PIN. The PIN is provided by the network operator
for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End key for a while.
3.5 Linking to the Network
After the SIM card and the mobile phone are successfully
unlocked, the mobile phone automatically searches for an
available network. After finding a network, the mobile phone enters
the standby state. When the mobile phone is registered in the
network, the name of the network operator is displayed on the
screen. Then you can dial or receive a call.
3.6 Dialing Calls
In the standby interface, press number keys to input the area code