User's Manual

services.

3. When on, the Bluetooth icon appears in the status bar.

Discoverability

By default, your phone is “discoverable” when turned on the Bluetooth. This

means other Bluetooth devices will see your phone in their scans for Bluetooth

devices.

Name your Bluetooth device

1. Make sure you have turned Bluetooth on.

2. Select Settings > Bluetooth > Bluetooth settings (touch MENU)> Rename

this device.

3. Type the name for your device in the dialog box, and then select ‘OK’.

4. Your new device name appears on the Bluetooth settings screen.

Pair & connect with Bluetooth devices

Before your phone can communicate with a Bluetooth headset or hands-free car

kit, the devices must “pair”, then “connect”:

1. Make sure you have turned Bluetooth on.

2. Your phone starts scanning for Bluetooth devices within range. As they are

found, the devices appear in the list of Bluetooth devices.

3. To pair with a device in the list, select it.

4. Type the device’s PIN and then ‘Pair’.

5. Once paired, select the device name to connect.

6. Pairing and connection status appear under the device name.

7. Once the other Bluetooth device shows “connected” status, you can start

using it to make and receive phone calls.

8. To un-pair with a device, touch the icon on the side of device to open the

context menu. Select Un-pair, as appropriate. If you select ‘Un-pair’ when

connected, you will be disconnected as well.

Notes: The phone supports only the headset and hands-free Bluetooth profiles,

so if you try to connect to a device that is not a headset or hands-free car kit,

then you will receive an “unable to connect” message.

If you pair with a second headset while connected to the first, the first headset

will remain connected. To switch connection to the second headset you must