Smart Watch User Manual P250 FCC ID; RQQHLT-P250KW Please refer to this manual before using the product Cautions before using
1. The company reserves the right to modify the contents of this manual without prior notice. It is normal that some functions may vary in certain versions of software. 2. Please charge this product with the configured charger for no less than 2 hours before use. 3. Please download the connection APP via mobile phone for synchronous time and personal information setting, for further details please refer to the manual instruction of following synchronization software. 4. The watch is IP68 waterproof rating.
1. Product overview Display Zone button Magnetic charging port Touch screen Heart rate testing spot Recommend phone’s version for connection: Android phones: support 5.0 OS and above iPhones:Support 9.0 OS and above 2.
2.1 Scan the QR code to download the APP for connection with your phone Please download the APP via browser of the phone ( Wechat is not supporting the downloading function) and mobile internet data is required. Please authorize the APP in your mobile to allow the Bluetooth connection. QR code is also available in the watch. =>It is recommended to use a browser to scan and download. Currently, WeChat scanner is not supported.
iPhone is under standby mode for more than 2hours. The bluetooth will reconnect automatically when the APP restarts. 2. For Android phone users, please enable the APP activated in the background platform via the setting. Operation process may various on different phones.
into “add your devices” page where you can select the corresponding model icon( See Chart 3), then you will be directed to the QR code page (see chart 4). 2.3 Open the paired QR code in the watch, at the same time scan and pair the watch by using phone’s APP. It will take around 30 seconds to be connected successfully after scanned.Please select all the “allow” when the permission requests automatically pop up to make sure every function work well.
2.4 For iPhone users, “Bluetooth Pair” request will pop up in your phone after scanned, paired then connected completely. 2.5 If the QR code scanning is failed, please select the manual connection function to finish BT connection. 4. APP settings ( Functions are available after connected successfully ) 4.1 Call reminder When the function is turned on, your watch can receive the calls reminder, vibrate once then will exit the interface automatically if no action is taken within 10s.
the watch end. 4.2 Notifications reminder To enable get all notifications, go into “Notification reminder” page, select the part of or all apps to be pushed as you like. 4.3 Alarm Clock Reminder Click the “Alarm Clock Reminder” and enter the setting page, click the icon on the top right corner to add alarm clocks, maximum of 5 clocks can be added. It can be synchronized to the watch accordingly. 4.
4.7 Heart rate monitoring Enter into the heart rate monitoring setting page, select turn it on or off, intervals setting of heart rate monitoring is supported. Heart rate monitoring will work automatically during setting intervals, data can be synced to the APP as well. 3.8 Remote Photography Turn it on to activate the the camera of your phone, remotely control your phone to take photos. It is normal that some phones may need to turn on the camera function first before using. 3.
Note: For iPhones, please forget the devices in phone’s bluetooth setting to make sure the device is disconnected completely. 5. Main functions of Smart watch 3.1 Basic Operation 3.1.1 Power on: Long press the button for 3 seconds to turn the watch on if the watch is powered off; Short press the button to wake the watch up if the watch is standby mode. 3.1.2 Power off: if the watch is on, long press the button or 3 second to turn the watch off. 3.1.3 Watch Interface Shift Process: 1.
Shortcut interface 3.1.1 Pull down the status bar, slide from top to bottom on the dial entering to the status bar, which includes functions of NDN mode’, brightness, settings,connected icon,battery 2.2 Dials shift Long press the screen for 3 seconds to bring up all the dial plates, slide up and down to choose the wanted page. Reset a new dial plate and replace the defaulted plate with a single touch on the scaled down plate. 2.3 Pedometer Pedometer is on by default and will real-time display the steps.
This smart watch is not equipped with GPS, therefore some sport modes that require A-GPS suppportive will vary with different versions, including the calculation and trail record. Please refer to the actual product. 2.4.2 Click the icon to enter the corresponding workout mode and customize the goal of the day, including distance, time and calorie. The customization is optional. The smart watch will automatically save the setting, and will apply to next usage of this workout mode. 2.4.
record function will keep recording if exercise continues. 2.5 Sleep Monitor The defaulted sleep monitor starts from 21:00 pm to next 9:00 am. If the watch is worn while sleeping, you can check the sleep time on the sleeping page of watch in the following morning; After the smart watch paired with the APP, the sleeping record will synchronize automatically (or manually) with the APP. The smart watch is able to automatically identify and judge the sleeping status.
check the history of heart rate records, including highest,average values, which only from the latest record. 2.
can enter the Music player page of the watch to control the phone’s music player. There may exist some compatibility problems as the variety of music player software. Normally the watch can control your phone’s music player directly, but some software may require to be open before accepting the control of the watch. 2.9.3 The watch is support to play, stop, switch to previous song or next song, but will not show the name of the song or control the volume. 3.
5.1.1 Click the stopwatch - enter to the stopwatch interface - click ‘ start’ button - start the timer - click ‘Lap’ at the left bottom will record the time period of every interval, click the ‘Stop’ button at right bottom to stop the counting, and the ‘Lap’ button will change to ‘clear’ button. Click the ‘Clear’ button at the left bottom when the counting is stop to cancel the counting. 5.1.
5.3.3 Screen brightness setting: click this option and enter to adjust the brightness of the screen. 5.3.4 APP downloading QR code: click this option and find the QR code for your phone to scan and download 5.3.5 Camera: After the watch successfully pair with the APP, click the ‘Camera’ on the APP, the watch will then pop up a camera icon which can be used to control your phone’s camera function. Photos will be automatically saved in the phone’s photo album.
installation is failed, please go to ‘setting’ of the phone and authorize the ‘ Unknown source’ , then the installation should be applicable. 6.2 When your phone prompt you to permission requests, please select ‘allow’ so as to avoid the failure of receiving notifications, scanning QR code and remote camera functions because the APP doesn’t get the permission from the phone.
too loose will affect the monitor function of the heart rate sensor. 6.5 Please avoid collision with hard objects as it may broken glass. 6.6 Please use 5V, 1A version chargers, this watch does not support quick charge. Charge under watery ( sweat) condition is prohibited to avoid short circuit and result in damage. 6.7 This watch is electronic monitoring product and the data is for reference only, can not be used as medical reference. 7.
watch. 7.2 Auto power off May result from low battery, please charge the watch instantly. 7.3 Short battery life 7.3.1 may occur when the battery hasn’t been fully charged, please ensure sufficient time for the charging ( at least 2 hours is required) 7.3.2 Charger or data line may not working properly, please change a new one. 7.3.3 Please check the port of the data line and try again to ensure a proper connection. 7.4 Bluetooth hasn’t connect to or unable to connect to the watch 7.4.
deviation may occur if going to bed late or only wear while sleeping. There may not sleeping data generated if go to bed at day time as the defaulted sleeping time is preset to between 9:00 pm to 9:00 am. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device ca n be used in portable exposure condition without restriction Warranty Card Client information Model Vendor Client name Contact no.
Description Date Problems Diagnosis Note