Use and Care Manual

Initial Startup

WARNING

We know you’re excited to get using your generator. Please be sure to follow the setup,

operation, and shut off instructions below thoroughly to ensure the best lifespan for your

generator.

1. (HY2800SEI ONLY) Setup the Battery: Remove the

Battery Access Panel from the unit by unscrewing

the screw at the top and releasing the panel.

2. (HY2800SEI ONLY) Connect the Battery: locate

and connect the loose connectors from the battery

wiring harness and the main wiring harness. The

battery is now connected to the unit.

3. (HY2800SEI) Re-install the Battery Access Panel

onto the unit. Ensure the screw is fastened properly.

4. Remove the main engine access panel from the unit

by unscrewing the 2 screws at the top and middle

of the unit.