PETROL MULTI-TOOL HYMT331 HYBC331 HY3300 POLE SAW HY3300 HEDGE TRIMMER Instruction Manual
TOOL KIT
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Starting when the engine is cold . . . . . . . . . . . . . . . . . . . . . . . 12 Features . . .
5-IN-1 PETROL MULTI-TOOL Features Eng ine unit Introduction 0 Safety lock-out The operating instructions are a part of this product. They contain 8 Carrying lug important information about safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified.
Strimmer/cutting blade attachment Technical data /;fl 2 x bolts (with snap ring, washer and nut) Eng ine unit: I!) Blade guard l;t) 3-section cutting blade €ID Strimmer with cutting filament ® Front boom (strimmer/3-section cutting blade) @) Locking pin @ Drive shaft Extension attachment eBoom �Screw grip � Locking pin � Drive shaft Engine type: 2-stroke engine, air-cooled, chrome cylinder Engine output (max.): 1 .45 kW/ 2.0 hp Cylinder capacity: 51.
Press the fuel pump (primer) 6x Attention! Risk of suffocation! Mixing ratio: 40 parts petrol to 1 part oil Caution! Poisonous CO vapours (carbon monoxide vapours)! Do not use the appliance in confined spaces! Semi-synthetc 2-stroke oil and unleaded petrol at 40:1 ratio. Warning! Do not use circular saw blades for the cutting blade function. Semi-synthetc 2-stroke oil and unleaded petrol at 40:1 ratio.
Hedge Trimmer Safety . IMPORTANT! READ CAREFULLY BEFORE USE! KEEP FOR YOUR RECORDS. Operational safety instructions for hedge trimmers NOTE ► The hedge trimmer is supplied completely assembled . ► Instructions and pictorial representations regarding the settings and use of the hedge trimmer and/or its controls, maintenance, lubrication by the user can be found in these instructions. ► Notes on the working position . ► Notes on the operating controls .
Maintenance and storage a) If the hedge trimmer is shut down for maintenance, inspection or storage, switch off the engine, pull the spark plug connector off the spark plug and ensure that all rotating parts have come to a standstill. Allow the machine to cool down before carrying out an inspection, settings, etc. b) Store the hedge trimmer where the petrol vapours cannot come into contact with flames or sparks. Always allow the hedge trimmer to cool down before storage.
Use and handling ■ Never start the appliance before the blade, saw chain and sprocket covers have been fitted correctly. ■ Do not cut any wood that is lying on the ground and do not attempt to saw roots that are protruding from the soil. Avoid immersing the saw chain in the soil at all costs, as this could blunt the saw chain. ■ If the appliance accidentally comes into contact with a solid object, turn off the engine immediately and inspect the appliance for damage.
■■ Work posture: Do not operate the appliance in an uncomfortable position, when you are unbalanced, with arms fully stretched or with only one hand. ■ Always ensure that you have a solid and firm stance. ■ Do not use the appliance if bystanders or animals are in the direct vicinity. Maintain a minimum distance of 15 metres between the operator and other people or animals when trimming. Maintain a minimum distance of 30 metres between the operator and other people or animals when mowing down to the ground.
Fuel and oil Installing/replacing the strimmer ■ ■ Install/replace the strimmer ■ Screw the strimmer e as displayed in figure 2c. ■ 0, Find the hole in the drive plate align it with the opposite hole and block it with the supplied hex key @. e onto the thread in an anticlockwise direction.
Turning the engine off Prevent kickback Emergency stop sequence When working with the 3-section cutting blade there is a risk of kickback if the blade strikes against solid obstacles (tree trunks, branches, tree stumps, rocks or similar). This will result in the cutting tool being catapulted back against the direction of rotation. This can lead to the loss of control of the appliance. Do not use the cutting blade near fences, metal posts, boundary stones or foundations.
Saw in sections Cleaning Trim long or thick branches before you make the final cut (see figure). Cleaning the engine unit Cc B b A a NOTE ■■ Clean the appliance thoroughly after every use. ■■ Always switch off the appliance before cleaning and then disconnect the spark plug connector . Working safely ■■ Keep the appliance, the cutting mechanism and the chain guard 6) in good condition to prevent injury. ■■ If the appliance has been dropped, check for significant damage or defects.
Air filter maintenance Contaminated air filters reduce the engine performance due to low air supply to the carburettor. Regular inspection is essential. The air filter O must be inspected after every 25 hours of operation and cleaned if necessary. The air filter must be checked more frequently if the air is dusty. 1.) Remove the cover of the air filter housing�2.) Remove the air filter 0. 3.) Clean the air filter Oby tapping or blowing it out (with compressed air).
Troubleshooting Maintenance intervals Engine unit Pole pruner Problem Possible cause Troubleshooting The engine does not start. Incorrect start-up process. Follow the instructions regarding starting. The engine starts but does not run at full power. Incorrect adjustment of the choke lever . Set the choke lever to " ". Contaminated air filter. Incorrect spark plug gap. The figures given here are based on normal operating conditions.