Workshop Manual

SYMBOLS

The symbols and the abbreviations explained in this section are used throughout the manual.

SYMBOLS IN SCHEMATIC

COMPONENTS

DIODE

A solid line means the entire

component is shown.

A broken line indicates only part of the component is shown.

The name of the component

appears next to its upper right

corner.

Notes about component

function follow its name.

CONNECTORS

Each connector is numbered

for reference in the component

location index.

The index also lists the total

number of cavities and the color

the connector. Wires may not be

used in all cavities.

This means the connector con-

nects directly to the component.

This indicates the connector

connects to a lead (pigtail),

wired directly to the com-

ponent.

This indicates a screw terminal

on the component.

This diode allows current to

flow only in the direction of the

arrow.

FUSE AND FUSIBLE LINK

HOT AT ALL TIMES

CIRCUIT BREAKER

Basically a reusable fuse, a circuit

breaker will heat and open if too

much current flows through it.

Some units automatically reset

when cool, others must be manu-

ally reset.