Hyundai Plasma Display USA Hyundai ImageQuest America 3101 North First Street San Jose, CA 95134 Hyundai tech support Tel : +800-568-0061,408-232-8654 Fax : +408- 232-8146 e-mail : syuen@hyundaiqa.com HQP421SR/421HR/501HR User’s Guide AVC USA. INC. 777 Mark Street, Wood Dale, IL 60191 Tel : 630-595-0123 / 800-568-0060 Fax : 630-595-2345 / 800-784-9422 e-mail : avctech@avcusa.com NEW ZEALAND TRANSTECH DISTRIBUTORS Ltd.
FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning : NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HYUNDAI Plasma Display DECLARATION OF CONFORMITY WE HYUNDAI ImageQuest CO., LTD.
Important Tips Image Retention effect(Image Sticking) 1. Cause : - Image Retention Effect could be come from displaying a still picture in certain period of time with at a certain area continuously, as the feature of Plasma Display Panel. - This is the same matters to other companies' PDP products, too. 2. Preventation : - To avoid this matter, use the product after reducing brightness and contrast, especially a still image is displaying for a long time.
HYUNDAI Plasma Display Image Sticking Precaution Still Image/Panorama/Wide/4:3 in motion Image Panorama, Wide, 4:3 aspect ratio Box or Still image • Precaution : - Image Sticking could be come from Still Image and Boundary line for a long time display and Brightness gap in Boundary. - This Matter(Image Sticking) is same thing under the other PDP's Company. - Still Image/Letter in watching TV also will be effect to Image sticking. *This matter(Image Sticking) is out of warranty.
Features A Wide Array of Screen Settings You can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the lighting or the outside weather conditions). You can switch among Standard, Dynamic, Movie and Mild options or you can configure the screen settings for yourself. A Wide Array of Sound Settings You can choose an optimal sound setting for the type of program you are watching.
HYUNDAI Plasma Display Table of Contents General Information Sound Setup Important Tips ......................................................................3 How to Select the Audio Mode ............................................47 Image Sticking Precaution ....................................................4 How to Set the Desired Audio .............................................48 Safety Precaution .................................................................5 How to Select AVL ........
GENERAL INFORMATION Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. WARNING If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth. - It may cause a fire or an electric shock. Do not connect multiple electrical appliances to a single outlet. - It may cause a fire due to overheating from the outlet.
HYUNDAI Plasma Display GENERAL INFORMATION Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows. This icon is intended to alert the user to the presence of potential danger and important operating instructions. WARNING : When there is a possibility of serious injury or death if not observed. ALERT : When there is a possibility of slight injury or product damage if not observed. Do not use a damaged power cord or plug, or loose outlet.
GENERAL INFORMATION Safety Precaution ......................................Continued from previous page The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. WARNING Never attempt to open, fix, or modify the PDP. - When there is a need for fixing, call a service center. Fire or electric shock may be caused.
HYUNDAI Plasma Display GENERAL INFORMATION Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows. This icon is intended to alert the user to the presence of potential danger and important operating instructions. WARNING : When there is a possibility of serious injury or death if not observed. ALERT : When there is a possibility of slight injury or product damage if not observed.
GENERAL INFORMATION Safety Precaution ......................................Continued from previous page The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. WARNING Do not place toys and cookies, etc. on the PDP, which may attract children’s attention. Children will climb on the PDP to reach whatever they have their eyes on. - If it falls over on children, it may cause serious injury.
HYUNDAI Plasma Display GENERAL INFORMATION Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows. This icon is intended to alert the user to the presence of potential danger and important operating instructions. WARNING : When there is a possibility of serious injury or death if not observed. ALERT : When there is a possibility of slight injury or product damage if not observed.
Contents of the Package GENERAL INFORMATION To purchase additional parts, consult a distributor or selling agent. TE MU PO WE R 3 2 1 6 5 4 9 IEW EV PR 8 7 ILL ST 0 D UN SO CT PE AS RE TU PIC L NE AN CH S MT ME LU VO AP SW UK Japan America/Canada Europe South Africa Australia E SIZ EP SLE F /OF ON CE UR SO PIP NU ME TV/AV N TIO CAP O INF TEC PRO OW H/L HIG TIO N O AUT PC.
HYUNDAI Plasma Display GENERAL INFORMATION Wall mounting frame Adjustable wall mounting frame Ceil mounting frame DVI PC video(digital) cable Component(Y, Pb, Pr) cable S-video cable Composite(Video & Audio) cable PC signal cable Scart cable 12
GENERAL INFORMATION Parts Names and Functions Front View * The above image may look different from the real product. Power button Use this button to turn on or off the PDP. Volume buttons Use these buttons for your desired sound level. These buttons also serve as the cursor of Select/Adjust when in Menu mode. Channel buttons Use these buttons to change channels. These buttons also serve as the cursor of Down and Up buttons when in Menu mode.
HYUNDAI Plasma Display Rear View GENERAL INFORMATION Sub woofer output If you wish to reproduce the lower bass frequencies, please connect the cable to your Subwoofer speaker with *AMP. RS-232 input terminal Connect to the RS-232 terminal of a PC for the service check. *For the control method using this terminal, consult an authorized PDP monitor dealer. Phone Jack(RS-232 Output) Extend an RS-232 input. DVI input terminal Connect to the DTV receiver with DVI terminal or to external devices such as a PC.
GENERAL INFORMATION Remote Control POWER MUTE 1 2 3 4 5 6 7 8 9 +100 PREVIEW 0 SOUND PICTURE ASPECT STILL VOLUME CHANNEL MTS SLEEP ON/OFF SOURCE SIZE SWAP PIP MENU EXIT INFO 15 TV/AV WIPER PC AUTO CAPTION POWER/STANDBY Use this button to turn the TV set on or off. MUTE Use this button to turn the sound off completely. NUMERIC KEYS Use these buttons to select channels. PREVIEW Use this button to return to the previous channel.
HYUNDAI Plasma Display GENERAL INFORMATION CAPTION Use this button to displays the closed captions that are broadcasted with certain TV shows. INFORMATION Use this button to display picture mode, resolution or various program information. WIPER Use this button to prevent any possible ghosts. White bar will pass through the TV screen to prevent ghosts. EXIT Use this button to exit from a menu. SELECT/ADJUST Select or adjust each item of menu.
GENERAL INFORMATION How To Use Speakers (Standing Type) Parts configuration chart 2 Speakers (left and right) 4 brackets 16 fixing screws 2 sets of speaker cables (left and right) Assembly and Connection Method Insert brackets into the grooves on the rear of speakers and fasten them with fixing screws. (Left and right side each) WARNING 17 Fasten with PDP body using fixing screws.
HYUNDAI Plasma Display How To Use Speakers (Desk Type) GENERAL INFORMATION Parts configuration chart 2 Speakers (left and right) 2 Speaker-stands (left and right) 8 fixing screws 2 sets of speaker cables (left and right) Assembly and Connect method Insert speaker-stands in the grove on the bottom of speakers and fasten them sing fixing screws. (Left and right side each) Upright and place them on desired place left and right of PDP.
GENERAL INFORMATION How To Install Wall Hanger Support 1. Caution 2. Parts configuration chart 1. Install on the vertical wall surface only. 2. Do not install on the following places to protect the performance of PDP and to prevent malfunction. Near sprinkler Detector Near heating devices Places where vibration or shock may be applied Near high voltage electric power line 3. Install in a proper method with the structural materials of the wall.
HYUNDAI Plasma Display How To Install Wall mount frame GENERAL INFORMATION 4. Installation Method 1. Unscrew screws fasted on four spots on the back of PDP. 3. Fix the wall mount frame on the wall with screws or nails. 2. Fasten the screws and plastics for mount frame on the spot where screws were as shown on the picture. 4. Hang the plastics for the mount frame on the wall mount frame. (If the PDP is lifted too much, the hanging plastic may be separated.
GENERAL INFORMATION How To Install Desktop Stand 1. Place the PDP body on a flat desk or shelf. Clean the surface of the desk or shelf in order to prevent scratch on the product. 2. Align the stand with PDP body below and fasten the stand bars using 4 fixing screws. 3. After the assembly is over, stand the assembled product at a desired place. Fixing screws Desk type stand Warning : Do not install at an unstable place or on a small support.
H Y U N DA I P L A S M A D I S P L AY Connections Connecting VHF and UHF Antenna............................................23 Connecting Cable TV ................................................................23 Before connecting the video/audio connections to external devices .....................................................................25 Connecting a VCR, Cable/Satellite Receiver ............................26 Connecting a DVD Player .........................................................
Connecting VHF and UHF Antenna Antenna with 75-ohm Round Leads If your antenna looks like this : it has 75-ohm round leads. !,-)*$. -0*$10 !,-)*$/ 234'5"4'6 !,-)*$/ 234'5"4'6 !,-)*$/ 234'5"4'6 CONNECTIONS Plug the antenna lead into the VHF/UHF terminal on the PDP. Use the Antenna Cable, an acessary included in the product package.
HYUNDAI Plasma Display Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables. Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box. This terminal might be labeled "ANT IN", "VHF IN", or simply, "IN". Connect this cable to a two-way splitter. 2 Connect a coaxial cable between an OUTPUT terminal of the splitter and the IN terminal of the cable box.
Before connecting the video/audio connections to external devices ..... Please make sure to read the following information on connection to enjoy best picture quality. Video/Audio connectors CONNECTIONS Types of video/audio cable : ➀ DVI-D ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE ➅ FULL SCART ➆ HALF SCART Best picture quality is displayed in the following order. DVI-D, D-Sub > COMPONENT > S-VIDEO > The superior picture quality starts from the far left side.
HYUNDAI Plasma Display Connecting a VCR, Cable/Satellite Receiver Connection Method Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver and Video/S-Video input terminal of PDP. (Connect cables and terminal in the same colors) 2 Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellite receiver and Audio input terminal of PDP.
Connecting a DVD Player CONNECTIONS Connection Method 1 Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input terminals(Y, Pb, Pr) of DVD(480i/480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the same colors) 2 Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD Audio on the rear of PDP.
HYUNDAI Plasma Display Connecting a DTV(Digital Broadcast) Receiver Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input terminals(Y, Pb, Pr) of DTV(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the same colors) 2 Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal for DTV Audio on the rear of PDP.
Playing Back a Tape Recorded On a Camcorder CONNECTIONS Connection Method 1 Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal of PDP. (Connect cables and terminal in the same colors) 2 Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder /Game player and Audio input terminal of PDP.
HYUNDAI Plasma Display Connecting to a PC(DVI, D-SUB) Connection Method Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminal of a PDP. In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PC and input terminal for DVI of PDP. 2 Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP.
Resolutions Supported in PC Resolution Horizontal frequency Vertical frequency 31.47 70.09 37.86 85.08 31.47 59.94 37.86 72.80 37.50 75.00 43.27 85.01 31.47 70.08 37.88 60.32 48.08 72.18 46.88 75.00 53.67 85.06 49.72 74.55 48.36 60.00 60.02 75.03 68.68 85.
HYUNDAI Plasma Display Scart Connection to the External Input Connection Method 1 2 This end can be fitted with : A Scart connector CONNECTIONS If you have video player that is supported CVBS, You can use Scart 1, Scart 2 port.
33 CONNECTIONS
H Y U N DA I P L A S M A D I S P L AY Picture Setup How to Select the Picture Mode ..............................................35 How to Set the Desired Picture ................................................36 How to Set Blue Screen ...........................................................37 How to Set Film Mode .............................................................38 How to Select a Color Temperature .........................................39 How to Set PIP [Mode] ............................
How to Select the Picture Mode Users can adjust picture mode automatically according to the input mode(TV, Video, S-Video, F/H Scart, DVD, DTV). PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “Picture” icon. 2 Press Left and Right buttons to select “MODE”.
HYUNDAI Plasma Display How to Set the Desired Picture Users can manually adjust the picture in their own ways. MENU Press Menu button. Menu items appear on the screen. PICTURE 2 Press Left and Right buttons to select “PICTURE” S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT FIT ENGINE OFF S TA N D A R D SELECT 4 Press Left and Right buttons to select “PICTURE CUSTOM”. Picture Custom menu appears. 5 Choose one of the items listed, then Press Left and Right buttons to adjust.
How to Set Blue Screen If there is no broadcast or no signal from a connected external device, your PDP will show a blue screen. If a broadcast signal comes in, the blue screen will be converted to a normal screen. PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “Picture” icon. 2 Press Left and Right button to select “PICTURE”.
HYUNDAI Plasma Display How to Set Film Mode Set Film Mode to receive a crisp, clear picture without flickering. MENU Press Menu button. Menu items appear on the screen. 2 Press Left and Right button to select “PICTURE”. S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT FIT ENGINE OFF S TA N D A R D SELECT MOVE FIT 4 Press Left and Right button to “ON/OFF”.
How to Select a Color Temperature Users can adjust Color as users want. PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “Picture” icon. 2 Press Left and Right button to select “PICTURE”. PICTURE MODE PICTURE CUSTOM BLUE SCREEN S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT FIT ENGINE OFF S TA N D A R D SELECT MOVE 3 4 Press Left and Right button, then Mode changes in order below.
HYUNDAI Plasma Display How to Set PIP [Mode] This is to set PIP(Picture In Picture) mode or Twin mode. MENU Press Menu button. Menu items appear on the screen. 2 Press Left and Right button to select “PICTURE”. S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT FIT ENGINE OFF S TA N D A R D SELECT + 000 OFF MENU MOVE PICTURE MODE PICTURE S TA N D A R D CUSTOM OFF OFF BLUE SCREEN FILM MODE S TA N D A R D COLOR TEMP PIP NOISE REDUCT 3 Press Up and Down button to move to “PIP”.
How to Set Multi-Screen [Input Source/Position/Size] This is to set the Input Source, Position and Size of the Sub-picture. (This function is available only when PIP mode active.) 7 PICTURE SETUP 8 Press Up and Down buttons to move to “SOURCE”. Press Left and Right button, then source changes in order below.
HYUNDAI Plasma Display Press Left and Right button, then position changes in order below. Right Down Left Down Left Up Right Up 14 In case the Input source in Sub picture is TV, go to step 15 when you wish to change the channels of Sub picture. Press Up and Down buttons to move to “Channel”. 15 PIP OFF TV S WA P MODE SOURCE S WA P LARGE RIGHT DOWN 037 SIZE POSITION CHANNEL SELECT MOVE MENU PIP OFF TV MODE SOURCE S WA P LARGE S WA P SIZE Press Left and Right button to select “Channel Number”.
Hot-Keys on the Remote Control ON/OFF How to Directly Turn PIP FUNCTION ON/OFF : Press PIP button. To turn ON/OFF the PIP function SIZE How To Directly Adjust PIP MODE & SIZE : Press button. To watch PIP/TWIN ways or to adjust the Size of Sub picture. Large Small TWIN SOURCE PICTURE SETUP How To Directly Change Sub Source : Press CURRENT : TV button. TV VIDEO S-VIDEO SCART 1 SCART 2 DVD DTV PC DVI Press Up and Down buttons to move to the Sub Source. And select using Left or Right button.
HYUNDAI Plasma Display How to Set Noise Reduction This is to eliminate some noise on the screen in Video mode. MENU Press Menu button. Menu items appear on the screen. 2 Press Left and Right button to select “PICTURE”. S TA N D A R D FILM MODE COLOR TEMP PIP NOISE REDUCT FIT ENGINE OFF S TA N D A R D SELECT MOVE 4 Press Left and Right button to adjust Screen quality.
How to Select the Fit(Fine Image Technology) Engine Mode Fit Engine mode function allows users to experience more lively, clearly and brightly images. (For 50” PDP only) PICTURE SETUP MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “Picture” icon. 2 Press Left and Right button to select “PICTURE”.
H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Sound Setup How to Select the Audio Mode ................................................47 How to Set the Desired Audio ..................................................48 How to Select AVL ....................................................................49 How to Select SRS WOW(Surround) ........................................50 How to Select MTS(Multi-Channel Sound) ...............................51 How to Set the Output of Subwoofer ...
How to Select the Audio Mode Users can adjust sound mode automatically as users want. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB 1 Press Up and Down buttons to move to “SOUND” icon. 2 Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE SOUND S TA N D A R D MODE CUSTOM OFF OFF AV L SRS WOW SOUND SETUP MTS SUB Press Left and Right button, then the menu changes in order below.
HYUNDAI Plasma Display How to Set the Desired Audio Users can manually adjust the sound in thier own ways. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB 1 Press Up and Down buttons to move to “SOUND” icon. 2 Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE MENU SOUND S TA N D A R D MODE CUSTOM OFF OFF AV L SRS WOW MTS SUB 4 Press Left and Right buttons to select “SOUND custom”.
How to Select AVL This function automatically gives a similar volume size to each channel. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB 1 Press Up and Down buttons to move to “SOUND” icon. 2 Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE SOUND MODE SOUND S TA N D A R D CUSTOM ON OFF AV L SRS WOW SOUND SETUP MTS SUB 3 Press Up and Down buttons to move to “AVL”.
HYUNDAI Plasma Display How to Select SRS WOW(Surround) You can enjoy the spectacular, clear and crisp sound. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB 1 Press Up and Down buttons to move to “SOUND” icon. 2 Press Left and Right buttons to select “SOUND”. S TA N D A R D MODE CUSTOM AV L OFF OFF MONO WOW WOOFER SELECT MOVE SOUND S TA N D A R D MODE CUSTOM OFF ON AV L SRS WOW MTS SUB Press Up and Down buttons to move to “SRS WOW”.
How to Select MTS(Multi-Channel Sound) Depending on the particaular program being brodcast, you can select to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information like news or weathter.) MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB 1 Press Up and Down buttons to move to “Sound” icon. 2 Press Left and Right buttons to select “Sound”.
HYUNDAI Plasma Display How to Set the Output of Subwoofer You can set this function when you wish to install your subwoofer speaker system. MENU Press Menu button. Menu items appear on the screen. SOUND SRS MTS SUB 1 Press Up and Down buttons to move to “SOUND” icon. 2 Press Left and Right buttons to select “SOUND”. Press Left and Right buttons to select “SUB WOOFER”. Sub Woofer menu appears. 5 Choose item, then Press Left and Right buttons to adjust.
53 SOUND SETUP
H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Channel Setup Memorizing the Channels ........................................................55 Fine Tuning Channel Reception ...............................................56 Storing Channels Manually ......................................................57 Using the LNA(Low-Noise-Amplifier) Feature ..........................
Memorizing the Channels Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
HYUNDAI Plasma Display Fine Tuning Channel Reception If the reception is clear, you do not have to fine tune channels, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. MENU Press Menu button. Menu items appear on the screen. CHANNEL CHANNEL LNA 1 Press Up and Down buttons to move to “CHANNEL” icon. 2 Press Left and Right buttons to select “CHANNEL”.
Storing Channels Manually You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. MENU Press Menu button. Menu items appear on the screen. CHANNEL CHANNEL LNA 1 Press Up and Down buttons to move to “CHANNEL” icon. 2 Press Left and Right buttons to select “CHANNEL”.
HYUNDAI Plasma Display Using the LNA(Low-Noise-Amplifier) Feature If the reception is clear, you don’t have to use this feature. If the signal is weak or distorted, try the followings. MENU Press Menu button. Menu items appear on the screen. CHANNEL A I R / C AT V AUTO PROGRAM FINE TUNE CHANNEL LNA 1 Press Up and Down buttons to move to “CHANNEL” icon. 2 Press Left and Right buttons to select “CHANNEL”.
59 CHANNEL SETUP
H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Function Setup How to Select the Aspect Ratio ...............................................61 Displaying Information .............................................................63 How to Set Key-Lock ...............................................................64 Using the Pixel Shift / Full White / Wiper Function ..................65 How to Freeze Picture .............................................................66 How to Set DPMS .....
How to Select the Aspect Ratio Users can adjust Aspect Ratio as users want. MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
HYUNDAI Plasma Display WIDE / AUTO WIDE General broadcast picture is adjusted to 16:9. NORMAL General picture size. PANORAMA Picture size for panorama video. ZOOM1 Zoom in 16:9 in vertical direction. FUNCTION SETUP ZOOM2 The picture enlarged to 16:9 format. This mode is recommended in letter box format. ZOOM3 This Mode is used to display 4:3. The picture using the full surface of the screen leaving the Sub-title visible.
Displaying Information You can view the channel information and setting status by pressing the “INFO” button on the remote control. AIR - 020 12 : 30 AM INFO In case of applying TV input Press INFO button. P I C T U R E M O D E : S TA N D A R D SOUND MODE : USER MTS MODE : MONO INPUT SIGNAL : MONO VIDEO - NTSC 12 : 30 AM INFO In case of applying VIDEO input Press INFO button. PC - 1024x768 12 : 30 AM In case of applying PC input Press INFO button.
HYUNDAI Plasma Display How to Set Key-Lock This is to lock the control buttons on the front bottom of PDP. MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
Using the Pixel Shift / Full White / Wiper Function This feature is designed to reduce image sticking effects during displaying a static picture. (Brightness degradation is caused by the scale effects of a panel, which is characteristic of a PDP.) MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
HYUNDAI Plasma Display How to Freeze Picture The user can temporarily stop the playing picture. Press Still button. STILL Playing picture is stopped. - Under multi-screen mode(PIP, TWIN), the main picture stops. To deselect Still function. Press Still button once more.
How to Set DPMS When in PC mode, you can activate Power Saving mode. MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
HYUNDAI Plasma Display Choosing the Your Languages When you start using your TV for the first time, you must select your language preference in order to display main menus and sub menues, etc. MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
How to Set Image Adjust in PC Mode MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
HYUNDAI Plasma Display PC AUTO How To Directly Select Auto Track : Press button. Automatically adjust Horizontal/Vertical position of the picture. - This function is provided in only PC mode. - When executing PC AUTO, optimum picture can be obtained if the setting is made under the full pattern. - You can store up to six modes by activating PC AUTO function. If you exceed six modes, the first stored mode information will be removed and a newly stored mode will be stored.
Viewing Closed Captions Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreignlanguage translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well.
HYUNDAI Plasma Display ...... Continued from previous page. CAPTION ON TEXT CHANNEL2 CAPTION MODE CHANNEL FIELD1 FIELD 7 Press the UP/DOWN/LEFT/RIGHT button to make the changes. 8 Follow the same procedure as in steps 6 above. EXIT Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inapproprite for children. The user must enter a PIN(Personal ID Number) before any of the V-chip restrictions are set up or changed. *When the V-Chip feature is activated, the PIP features do not function. MENU Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to “FUNCTION” icon. 2 Press Left and Right buttons to select “FUNCTION”.
HYUNDAI Plasma Display ...... Continued from previous page. CONFIRM CONFIRM 9 Re-enter the same 4 digits. When the confirm screen disappears, your PIN has been memoriged. V-CHIP is highlighted. SELECT PIN PIN : - - - MOVE - MENU Go to step 10, if you need to set restrictions using the “TV Guideline”. If you foget the PIN, Press the remote-control buttons in the following sequence, which resets the PIN to "0-0-0-0".
...... Continued from previous page. 14 At this point, one of the TV-Guidelines is selected. Press the right button : Depending on your exiting setup, a letter "U" or "B" will start blinking. (U=Unblocke, B=Blocked) 15 Whlie the "U" or "B" is blinking, press the Up and Down button to block or Unblock the category. Press the Right button to save the TV-Guidelines. A TV-Rating will selected, and no letters will blink.
H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Clock Setup How to Set Clock ........................................................................77 How to Set On Time ....................................................................78 How to Set Off Time ....................................................................80 How to Set Sleep Time ...............................................................
How to Set Clock You can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock if you wish to use the automatic on or off timers. Ex) To set to 6:30 PM, MENU Press Menu button. Menu items appear on the screen. TIME AM CLOCK ON TIME OFF TIME AM 1 Press Up and Down buttons to move to “TIME” icon. 2 Press Left and Right buttons to select “TIME”.
HYUNDAI Plasma Display When the power supply(AC main power) is cut off, the clock is reset to the value before the Time set. Press the Right button and then go to step 10 if you need to set on time. How to Set On Time This function allows you to automatically turn on your PDP at the preset time. Ex) To set to 7:20 AM, 10 Press Up and Down buttons to move to “ON TIME”. TIME CLOCK ON TIME 6 30 11 Press Left and Right buttons to select “ON TIME”. On Time menu appears.
...... Continued from previous page. (Set the volume level and channel at the time when your PDP turns on.) Press Left and Right button to move to “ON/OFF”. 18 Press Up and Down buttons to set to “ON”. 19 Press the Right button and then go to step 20 if you need to set the Channel/Volume. ON 7 TIME CHANNEL VOLUME SELECT TIME 20 AM 2 MOVE ON 7 TIME CHANNEL MENU TIME 20 AM 2 Press Up and Down buttons to move to “CHANNEL”. 21 Press Left and Right buttons to set to “Channel”.
HYUNDAI Plasma Display How to Set Off Time This function allows you to automatically turn off your PDP at the preset time. Ex) To set to 11:30 PM, MENU Press Menu button. Menu items appear on the screen. TIME CLOCK ON TIME OFF TIME 6 30 Press Up and Down buttons to move to “TIME” icon. 2 Press Left and Right buttons to select “TIME”. SELECT MOVE MENU TIME CLOCK ON TIME 6 30 Press Up and Down buttons to move to “OFF TIME”.
...... Continued from previous page. Press Left and Right button to move to “ON/OFF”. 10 TIME CLOCK ON TIME OFF TIME 6 30 11 30 Press Up and Down buttons to set to “ON”. CLOCK SETUP EXIT 81 SELECT PM OFF SLEEP 11 PM MOVE Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
HYUNDAI Plasma Display How to Set Sleep Time This function allows you to automatically turn off your PDP after a designated amount of time. MENU Press Menu button. Menu items appear on the screen. TIME CLOCK ON TIME OFF TIME 6 30 PM 11 30 AM 1 Press Up and Down buttons to move to “TIME” icon. 2 Press Left and Right buttons to select “TIME”. SELECT Press Up and Down buttons to move to “SLEEP”. 4 Press Left and Right buttons, then the menu changes in order below.
83 CLOCK SETUP
H Y U N DA I P L A S M A D I S P L AY HYUNDAI Plasma Display Appendix Glossary .................................................................................. 85 Troubleshooting ...................................................................... 87 Cleaning and Caring .............................................................. 89 Product Specifications ............................................................
Glossary Component video Composite video Composite video is sent through a single cable. Composite video combines the color shade (chrominance) and brightness (luminance) information into one video signal. S-VIDEO S VIDEO requires a single cable, which carries the brightness (luminance) and color (chrominance) signals of the picture separately. S-VIDEO provides better resolution than composite video, which carries the signals together.
HYUNDAI Plasma Display VHF/UHF DVD DVI Coaxial Cable LNA (Low-Noise-Amplifier) Aspect ratio PIP (Simultaneous Screen) SWAP Picture Mode Sound Mode VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300 megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300 to 3,000 megahertz. DVD (digital versatile disc) is an optical disc that can store a huge volume of multimedia such as video, game, and audio application, etc.
Troubleshooting Installation Problems Symptom How can I install an antenna? TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Possible solution Refer to pages 23~24. Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter). Picture Problems Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on.
HYUNDAI Plasma Display Auto On does not work. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. After setting the time, I turned TV off and turn it on. The programmed information has been erased. Ensure to use the remote control or power button on the product to turn off your TV.
Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth. Never use any solvent on the screen such as Acetone, Benzene, or Thinner, etc.
HYUNDAI Plasma Display Product Specifications Display (PDP TV) MODEL HQP421SR HQP421HR HQP501HR Pixel 852(H) x 480(V) 1024(H) x 768(V) 1366(H) x 768(V) Width 1030 mm 1208 mm Height (Excluding stand) 631 mm 724 mm Height (Including stand) 717 mm 809.
Component Video Signal Format If PDP cannot reproduce proper video image, it's necessary to select a specific component video signal format among the below. - DVD : 480i / 480p / 720p / 1080i - DTV (Digital Broadcast) : 480p / 720p / 1080i - All signals are available for 60Hz. PDP couldn't display proper video image in case of different output signal from the specifiation that PDP supports. (The below specification table) Then, please adjust the output signal setting from the appliances.
HYUNDAI Plasma Display MEMO APPENDIX 92
APPENDIX MEMO 93
HYUNDAI Plasma Display MEMO APPENDIX 94
APPENDIX MEMO 95