Operation Manual

1
FEATURES OF YOUR HYUNDAI
17
B085A01JM-GAT
REAR SEAT
Adjusting Seatback Angle
To recline the seatback, pull the seatback
folding lever and release it after the de-
sired seatback angle is achieved.
When you recline the seatback to desired
position, always be sure it has locked into
position.
OJM019005
Seatback
folding lever
!
OJM019006
B085B02JM-AAT
Folding Rear Seatback
For convenience, the seatbacks and seat
cushions may be folded down and up.
CAUTION:
When reclining the seatback, you should
adjust the seatback folding lever while
standing.
1. Pull the seatback folding lever then
push down the seatback.
2. Be sure it has locked into position to
listen an audible "Click".
HJM2048
!
NOTE:
o Before folding the seatback, place
the rear seat belt buckles in the buckle
pouch on the seatback. This will pre-
vent the seat belt buckles from be-
coming covered by the seat cushion
when it is returned to the seating po-
sition.
CAUTION:
Be careful not to overload seatback.
Overloading may cause damage the
seatback.
3. To return the seatback to its normal
position, pull the seatback folding lever
and reverse the above procedure.